Hi, I had the same problem when configured eap. Instead of using your user user3 Auth-Type := Local, User-Password == "cisco"
try with this one: user3 Auth-Type := eap, User-Password == "cisco" In my case that was the problem bfr ----- Mensaje original ----- De: Nedialko Dimitrov <[EMAIL PROTECTED]> Fecha: Jueves, Febrero 26, 2004 9:55 am Asunto: WindowsXP EAP-MD5 authentication problem > Dear all, > > I'm trying to configure > WindowsXP <-- wireless-> Cisco AP1100 <--> FreeRadius > with MD5 authentication following > http://lists.cistron.nl/pipermail/freeradius-users/2002- > August/009532.html > The version of FreeRadius: > radiusd: FreeRADIUS Version 0.9.3, for host i686-pc-linux-gnu, > built on Feb > 17 2004 at 16:54:51 > > > My WindowsXP client settings are : > Connection properties -> > Authentication : Enable IEEE 802.1x ... > EAP type PEAP (the other option is Smart Card or Cetificate) > Properties -> > Select Auth. Method: EAP-MSCHAP-v2 (the othe options is > Smart Card > or Cetificate) > > > This is my freeradius debug: > > Waking up in 2 seconds... > rad_recv: Access-Request packet from host 192.168.4.5:21645, id=83, > length=123 > User-Name = "user3" > Framed-MTU = 1400 > Called-Station-Id = "0002.8a0e.33c0" > Calling-Station-Id = "0090.9660.5c87" > Message-Authenticator = 0x2ce00fea6464f1816607e046a7140288 > EAP-Message = 0x0201000a017573657233 > NAS-Port-Type = Wireless-802.11 > NAS-Port = 350 > Service-Type = Framed-User > NAS-IP-Address = 192.168.4.5 > NAS-Identifier = "ap" > modcall: entering group authorize for request 6 > modcall[authorize]: module "preprocess" returns ok for request 6 > rlm_eap: EAP packet type notification id 1 length 10 > rlm_eap: EAP Start not found > modcall[authorize]: module "eap" returns updated for request 6 > users: Matched user3 at 92 > modcall[authorize]: module "files" returns ok for request 6 > modcall: group authorize returns updated for request 6 > rad_check_password: Found Auth-Type Local > auth: type Local > auth: No User-Password or CHAP-Password attribute in the request > auth: Failed to validate the user. > Delaying request 6 for 1 seconds > Finished request 6 > Going to the next request > Waking up in 2 seconds... > --- Walking the entire request list --- > Cleaning up request 5 ID 82 with timestamp 403d3097 > Sending Access-Reject of id 83 to 192.168.4.5:21645 > > My users file record is just: > > user3 Auth-Type := Local, User-Password == "cisco" > > I believe that the problem is here: > ----- > auth: type Local > auth: No User-Password or CHAP-Password attribute in the request > auth: Failed to validate the user. > ---- > but I cannot guess what is missing in my configuration ?! > > Any ideas ? > > Best, > > Nedialko > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
