Try this (i don't know if it is the right way, but it works):
Terminate the outer-user in hints:
DEFAULT Prefix == anonymous, Strip-User-Name = No
Realm = LOCAL
Then the inside-user is proceeded as usal and you don`t
need Auth-Type:= EAP.
regards
Helmut
What should I wite instead of
TAYLAN KIRAN [EMAIL PROTECTED] wrote:
What should I wite instead of EAP. When I write Local or System it
didnt work.
So... don't do that.
But I need to authenticate users on edirectory via LDAP.
Try the latest CVS snapshot, which has eDirectory support.
Ldap servwer vi have field
Thank you for your response,
What should I wite instead of EAP. When I write Local or System it
didnt work.
I have one more question.
When I add user named test in users file as following,
test Auth-Type := EAP, User-Password == 11
Filter-Id =
TAYLAN KIRAN [EMAIL PROTECTED] wrote:
You say You we only need to enable EAP-TTLS but it does not work. You
can find debug log as following.
...
users: Matched entry deneme at line 152
modcall[authorize]: module files returns ok for request 4
modcall: group authorize returns ok for
TAYLAN KIRAN [EMAIL PROTECTED] wrote:
in eap.conf ttls section default_eap_type = md5. but I need to use
EAP-TTLS inner PAP.
when I set default_eap_type=pap or PAP it does not accept. How can I
enable PAP.
Once you configure EAP-TTLS, inner PAP works.
And no, PAP is not an EAP type,
You say You we only need to enable EAP-TTLS but it does not work. You
can find debug log as following.
client is configured with securew2 and EAP-TTLS PAP authentication.
Thanks,
rad_recv: Access-Request packet from host 172.18.3.95:10259, id=34,
length=83
Message-Authenticator =
6 matches
Mail list logo