I setup FreeRadius as proxy as I want to extract MSCHAPv2 auth from
EAP-PEAP/MSCHAPv2 ,and proxy only MSCHAPv2 request to another two radius
servers for fault tolerance.
I can successfully do it with each one of the IAS servers below individually,
however if one of the serves goes down and
proxy_tunneled_request_as_eap = no
use_tunneled_reply = no
copy_request_to_tunnel = yes
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/peap-termination-issue-when-using-fault-tolerance-tp4266256p4266256.html
Sent from
Gil Mazor wrote:
I can successfully do it with each one of the IAS servers below
individually, however if one of the serves goes down and request is forward
to the second servers on the list I get an error :
Error receiving packet: Connection reset by peer
Please post the *full* debug
@lists.freeradius.org
Sent: Sunday, March 27, 2011 7:47:07 PM
Subject: Re: peap termination issue when using fault tolerance
Gil Mazor wrote:
I can successfully do it with each one of the IAS servers below
individually, however if one of the serves goes down and request is forward
to the second
Gil Mazor wrote:
Yes , the error do cause a problem, as once it occurs , I must restart
Radiusd.
I attach two logs, first one is with the failure and the second one is a
success , when the second IAS is commented in proxy.conf
Log of the problem:
FreeRADIUS Version 2.1.10, for host
it?
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/peap-termination-issue-when-using-fault-tolerance-for-Redundency-tp4266256p4266335.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
6 matches
Mail list logo