Hi All
I have this Error when using radclient:
radclient: Nothing to send.
radclient:: Expected end of line or comma
I do not know what is means ?
(radclient is run by PlPerl script in my postgresql database engine)
Best regards.
-
List info/subscribe/unsubscribe? See http
On 11 Sep 2013, at 11:03, Mehdi Ravanbakhsh baba...@gmail.com wrote:
Hi All
I have this Error when using radclient:
radclient: Nothing to send.
radclient:: Expected end of line or comma
I do not know what is means ?
It means you've not specified any input pairs, use the -f option
thanks Arran
It is solved
Best regards.
On Wed, Sep 11, 2013 at 3:03 PM, Arran Cudbard-Bell
a.cudba...@freeradius.org wrote:
On 11 Sep 2013, at 11:03, Mehdi Ravanbakhsh baba...@gmail.com wrote:
Hi All
I have this Error when using radclient:
radclient: Nothing to send
Hi Alan,
I would like to specify that I'm using radclient as a RADIUS proxy. I reach the
RADIUS server through a load balancer. The server uses ports other than 1812
and 1813 in its responses because the matching between requests and responses
is done through the Proxy-State attribute
On 30 May 2013, at 05:23, rosario.matt...@accenture.com wrote:
Hi Alan,
I would like to specify that I'm using radclient as a RADIUS proxy.
Um. Why?
I reach the RADIUS server through a load balancer. The server uses ports
other than 1812 and 1813 in its responses because the matching
rosario.matt...@accenture.com wrote:
I would like to specify that I'm using radclient as a RADIUS proxy.
Nonsense. radclient is a client. It's not a server. It's not a proxy.
I reach the RADIUS server through a load balancer.
That's fine.
The server uses ports other than 1812
maggio 2013 14:27
To: FreeRadius users mailing list
Subject: Re: Radclient receives response messages from different source port
than destination port of request messages
On 30 May 2013, at 05:23, rosario.matt...@accenture.com wrote:
Hi Alan,
I would like to specify that I'm using radclient
Hi everyone,
I use radclient to send Access-Request messages to a RADIUS server (towards
1812 port), which responds with Access-Accept messages with a different source
port number (e.g. 28120). So radclient prints out:
rad_recv: Access-Accept packet from host 10.130.159.200 port 28120, id=20
rosario.matt...@accenture.com wrote:
I use radclient to send Access-Request messages to a RADIUS server
(towards 1812 port), which responds with Access-Accept messages with a
different source port number (e.g. 28120). So radclient prints out:
rad_recv: Access-Accept packet from host
to force
radclient to recognize that response? I have to edit the source files?
Regards,
Rosario
-Original Message-
From:
freeradius-users-bounces+rosario.mattera=accenture@lists.freeradius.org
[mailto:freeradius-users-bounces+rosario.mattera=accenture@lists.freeradius.org
source port because of Proxy-State attribute is used in the
Access-Request.
Nonsense.
RADIUS doesn't work like that.
Is there a way to force radclient to recognize that response? I have to
edit the source files?
No.
RADIUS doesn't work like that. FreeRADIUS will *never* work like
To: FreeRadius users mailing list
Subject: Re: Radclient receives response messages from different source port
than destination port of request messages
rosario.matt...@accenture.com wrote:
Thanks Alan for your response. Anyway I can't modify RADIUS server
configuration because does not belongs to my
Hi All,
I've successfully install coovachili anda freeradius using mysql database.
Now I've just try to disconnect coovachilli user online with radclient
command:
I try with command bellow to disconect user=alice
* echo User-Name=alice | radclient -x localhost:3779 disconnect testing123
*echo User-Name=alice | radclient -x 192.168.2.3:3779 disconnect
testing123*
*Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779*
*
*
* default port of freeradius is 1812 and 1813,, use these ports*
On Sun, Mar 10, 2013 at 6:24 PM, Iftakhul Anwar an...@meruvian.org wrote:
Hi All
Iftakhul Anwar wrote:
/echo User-Name=alice | radclient -x 192.168.2.3:3779
http://192.168.2.3:3779 disconnect testing123/
/Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779/
/ User-Name = alice/
/radclient: no response from server for ID 78 socket 3/
/
/
Note: 192.168.2.3 is ip
I've run server on debug mode.
But when i try to execute : echo User-Name=alice | radclient -x
192.168.2.3:3779 disconnect testing123
[output bellow]
*$ echo User-Name=alice | radclient -x 192.168.2.3:3779 disconnect
testing123*
*Sending Disconnect-Request of id 185 to 192.168.2.3 port 3779
Iftakhul Anwar wrote:
I've run server on debug mode.
You didn't post it. As suggested in the FAQ, man page, web pages,
and daily on this list.
But when i try to execute : echo User-Name=alice | radclient -x
192.168.2.3:3779 disconnect testing123
You already said that.
On server radius
...@deployingradius.comwrote:
Iftakhul Anwar wrote:
I've run server on debug mode.
You didn't post it. As suggested in the FAQ, man page, web pages,
and daily on this list.
But when i try to execute : echo User-Name=alice | radclient -x
192.168.2.3:3779 disconnect testing123
You already said
Iftakhul Anwar wrote:
On site-avalaible/coa i've get this :
You're supposed to READ IT. And ENABLE IT.
You do know how to enable it, right? You know the difference between
raddb/sites-enabled and raddb/sites-available?
And the point of running the server in debugging mode is to READ
in 4.8 seconds.
Cleaning up request 1 ID 6 with timestamp +181
Ready to process requests
But when i try to execute command to disconnect , still not response:
echo User-Name=alice | radclient -x 192.168.2.3:3779 disconnect testing123
Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779
User
.
But when i try to execute command to disconnect , still not response:
echo User-Name=alice | radclient -x 192.168.2.3:3779
disconnect testing123
Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779
User-Name = alice
Because the server isn't listening on that port.
are there missing
Tarun Dixit wrote:
1. Is vqp support already enabled in freeradius(radclient and server
both) by default?
Or do I need to enable some flag before compiling freeradius for VQP
support?
VQP is in the server by default. It's not in radclient.
2. I want to test the functionality
On 25 Oct 2012, at 16:28 , Alan DeKok wrote:
Tarun Dixit wrote:
1. Is vqp support already enabled in freeradius(radclient and server
both) by default?
Or do I need to enable some flag before compiling freeradius for VQP
support?
VQP is in the server by default. It's not in radclient
jobhunt...@aol.com wrote:
I've read where radclient can be used to send a change-of-authorization
message (COA) from the server to a NAS to change the bandwidth limit but I
have not been able to find an example of this.
Does any have an example of radclient sending a coa message to change
I've read where radclient can be used to send a change-of-authorization message
(COA) from the server to a NAS to change the bandwidth limit but I have not
been able to find an example of this.
Does any have an example of radclient sending a coa message to change the
bandwidth limit?
-
List
alan buxey a.l.m.bu...@lboro.ac.uk writes:
what does 'which radclient' tell you and what does eg 'locate radclient'
give you?
Or the most obvious one: What does radclient -v say?
Bjørn
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi Alan,
thanks for your reply but as far as i know nobody as edited our version of
radclient ?!
It was just a clean install done by one of my colleagues.
And when he installed it the only purpose of freeradius was for authentication.
We didn't even think about using CoA.
When you say edited
Hi,
thanks for your reply but as far as i know nobody as edited our version of
radclient ?!
do yoi have multiple copies ont he server - ie do you have
it installed via an RPM install (for example) of an old verion of
freeradius
what does 'which radclient' tell you and what does eg 'locate
500A02B5383F27D9
## BEGIN ##
old_IFS=$IFS
IFS=$'\n'
for i in `cat file1`
do echo $i | gawk '{print Acct-Session-Id=$3\nNAS-IP-Address=$1}' |
radclient -p 100 -x 3.3.3.3:3799 disconnect ''secret''
done
IFS=$old_IFS
## END ##
But in this script the parameter -p is not used
root@ulrich
ulrich ramassamy wrote:
I have one problem with an options of raclient tool's:
Please start a new thread, and use a good subject line. It's awkward
to respond to a message labeled Digest. And edit the message.
There's no reason to have hundreds of lines of off-topic content.
But in this
Hello,
I am writing you because I need your help on using the tool radclient.
I need to send Packet Of Disconnect (POD). I have one file (for example
name file1) and in this file, I have 3 columns (IP, MSISDN,
Acct-Session-Id):
IP MSISDN Acct-Session-Id
1.1.1.1 3368894 500A02B2382F3D8E
always found radclient with the option coa
to send/initiate CoA-Packets.
And some of my colleagues (development) also use radclient for this purpose.
BUT if i look at our radclient (v2.1.12) the coa option is missing there ?
Last login: Sat May 5 15:17:27 2012 from dhcp-10-61-100-168.cisco.com
Treusch Thorsten wrote:
Now we have started to evaluate CoA on FreeRadius for both scenarios:
a) Receive CoA packets from Node
b) Send CoA-Requests to node (and analyze CoA-Ack, CoA-Nack
Reading through several pages i always found radclient with the option
coa to send/initiate CoA-Packets
Hi all,
we did several test using UnixODBC instead of OCI driver, results are good
and issue seems to be fixed.
Thanks all
Fulvio
2012/3/22 Alan DeKok al...@deployingradius.com
fulvio fabiani wrote:
Hi all,
sorry for the misunderstanding.
We execute same test (with two radClient
Hi all,
sorry for the misunderstanding.
We execute same test (with two radClient) on Freeradius 2.1.12 following
the instruction in doc/bugs documentation, result is the same.
Find attached the output.
We are now executing same test on freeradius v2.1.x GIT, I will update with
the results
Hi all,
please find attached also the output produced executing same test with
2.1.X GIT version,
Best regards
Fulvio
2012/3/22 fulvio fabiani fabiani.ful...@gmail.com
Hi all,
sorry for the misunderstanding.
We execute same test (with two radClient) on Freeradius 2.1.12 following
fulvio fabiani wrote:
Hi all,
sorry for the misunderstanding.
We execute same test (with two radClient) on Freeradius 2.1.12 following
the instruction in doc/bugs documentation, result is the same.
Find attached the output.
It's crashing in the Oracle libraries.
You're probably
]
2012/3/21 Alan DeKok al...@deployingradius.com
fulvio fabiani wrote:
Hi Alan,
We did same test with freeRadius version 2.1.12, unfortunately same
result: as we start second radClient, Freeradius instance crash.
Answering previous questions, no we don't use rlm_sql, we use perl
module
hi,
in previous emails you were asked to run 2.1.12 or the latest 2.1.x GIT release
- but this output is from 2.1.11
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Yes I know,
we did not yet test the latest 2.1.x GIT release and test with 2.1.12 or
2.1.11 give same results.
Is it mandatory?
2012/3/21 Alan Buxey a.l.m.bu...@lboro.ac.uk
hi,
in previous emails you were asked to run 2.1.12 or the latest 2.1.x GIT
release
- but this output is from
Hi,
Yes I know,
we did not yet test the latest 2.1.x GIT release and test with 2.1.12 or
2.1.11 give same results.
well, you were asked to test the 2.1.x GIT release as it has some rather
important fixes in it.
as for the 2.1.12 - yes. mandatory as thats the latest release code to
On Thu, Mar 22, 2012 at 3:04 AM, fulvio fabiani
fabiani.ful...@gmail.com wrote:
Follow the server tracing output (each crash the same output):
2012/3/21 Alan DeKok al...@deployingradius.com
See doc/bugs
So you decide to run strace instead of using gdb as written in
doc/bugs? And how did you
fulvio fabiani wrote:
Yes I know,
we did not yet test the latest 2.1.x GIT release and test with 2.1.12 or
2.1.11 give same results.
Is it mandatory?
It's mandatory to follow instructions on this list.
You were asked to do certain things which would let us help you.
You've ignored
Hi Alan,
We did same test with freeRadius version 2.1.12, unfortunately same result:
as we start second radClient, Freeradius instance crash.
Answering previous questions, no we don't use rlm_sql, we use perl module,
that via oracle perl driver, executes query on the database.
BR,
Fulvio
Hi,
We did same test with freeRadius version 2.1.12, unfortunately same
result: as we start second radClient, Freeradius instance crash.
Answering previous questions, no we don't use rlm_sql, we use perl module,
that via oracle perl driver, executes query on the database.
cool
fulvio fabiani wrote:
Hi Alan,
We did same test with freeRadius version 2.1.12, unfortunately same
result: as we start second radClient, Freeradius instance crash.
Answering previous questions, no we don't use rlm_sql, we use perl
module, that via oracle perl driver, executes query
Hi Phil,
thanks for your answer.
Do the 2.1.12 fix this kind of problem?
We did some additional analysis, we found that with this configuration:
- 1 freeradius
- 1 radclient
everythings works,
but with
- 1 freeradius
- 2 radlicent
the freeradius instance crash as we start the second
on 2.1.12
We did some additional analysis, we found that with this configuration:
- 1 freeradius
- 1 radclient
everythings works,
but with
- 1 freeradius
- 2 radlicent
the freeradius instance crash as we start the second client.
Our application execute queries on Oracle Database
Hi,
thanks for your answer.
Do the 2.1.12 fix this kind of problem?
did you try with 2.1.12 ? its got a lot of fixes related to this behaviour.
there is really no need to question/query the advice given. use the latest
version - IF there is still a problem then its important as then it
Hi all,
i’ve a problem with concurrent accounting requests with free radius 2.1.11.
In details:
I’ve 2 free radius servers balanced by bigip f5 through roundrobin
algorithm. I use to send account request using radclient on a machine
placed in the same sub-netmask of f5, and it forward
On 16/03/12 16:57, fulvio fabiani wrote:
Hi all,
i’ve a problem with concurrent accounting requests with free radius 2.1.11.
Upgrade to 2.1.12 and try again.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
.
radwho -R is reporting a blank Framed-IP-Address = line, which
causes radclient to choke (that was the source of the failed to get
value messages).
So, if I modify the radzap script to grep -v '^Framed-IP-Address', that
should work.
Thanks!
Sean
-
List info/subscribe/unsubscribe? See http
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm trying to run a radzap and having no luck. For example, if I try:
radzap -d /etc/raddb -N $NAS_IP -P 1 -u las $NAS_IP $NAS_PW
radclient:: failed to get value
radclient: Nothing to send.
I've also tried it with the NAS name (52a2, from
Hi,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm trying to run a radzap and having no luck. For example, if I try:
radzap -d /etc/raddb -N $NAS_IP -P 1 -u las $NAS_IP $NAS_PW
radclient:: failed to get value
radclient: Nothing to send.
I've also tried it with the NAS
Hello,
Need to send empty value in attribute via coa request for clear any
value in current state of attribute and clear attribute itself:
# /bin/echo Context-Name = local, Qos-Policing-Profile-Name='' ,
Qos-Metering-Profile-Name='' , Framed-IP-Address = yy.yy.yy.yy |
/usr/local/bin/radclient
='' ,
Qos-Metering-Profile-Name='' , Framed-IP-Address = yy.yy.yy.yy |
/usr/local/bin/radclient -x -t 3 -c 1 -r 2 -p 4 xx.xx.xx.xx:3799 coa xx
Sending CoA-Request of id 121 to xx.xx.xx.xx port 3799
Context-Name = dhcp
Qos-Policing-Profile-Name =
Qos-Metering-Profile-Name
On Jun 27, 2011, at 9:38 AM, Arran Cudbard-Bell wrote:
RFC 2865 Page 24
string1-253 octets containing binary data (values 0 through
255 decimal, inclusive). Strings of length zero (0)
MUST NOT be sent; omit the entire attribute instead.
If your
27.06.11 11:45, Arran Cudbard-Bell пишет:
On Jun 27, 2011, at 9:38 AM, Arran Cudbard-Bell wrote:
RFC 2865 Page 24
string1-253 octets containing binary data (values 0 through
255 decimal, inclusive). Strings of length zero (0)
MUST NOT be sent; omit
`printf \0`, radclient *should*
include an attribute with this value.
This is only exit for now and it was first what has been done.
Thanks for your answer.
I will try to terror vendor of my box.
Just for clarify - this restriction applied to VSA attributes? or only
standard? or whole
-E9- C7 -51- 89
User-Password = mac
Nas-IP-Address = 127.0.1.1
Nas-Port = 1812
Framed-Protocol = PPP
radclient: no response from server for ID 208 socket 3
help to solve the problem -
List info/subscribe/unsubscribe
Bjørn Mork wrote:
RCS keywords don't make sense with git, so use the RADIUSD_VERSION
macro instead, like the server and radmin already do.
Added, thanks.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
/radclient.c
index 1266502..8864798 100644
--- a/src/main/radclient.c
+++ b/src/main/radclient.c
@@ -927,7 +927,7 @@ int main(int argc, char **argv)
timeout = atof(optarg);
break;
case 'v':
- printf(radclient: $Id
On 2010/05/15 08:28 AM, Alan DeKok wrote:
...
Do I have to do anything more than any default configuration?
In 2.1.8, there's an example CoA server in raddb/sites-available/coa
The coa example was missing from 2.1.8.
Please have a look here.
Eric Martell wrote:
I followed the direction of how to setup COA in the freeradius.
Uncommented from client.conf coa_server = localhost-coa
When I ran the sample radclient, I am not seeing any response back.
...
Do I have to do anything more than any default configuration?
In 2.1.8
Hi Alan,
Thanks for the reply. Pardon my ignorance but as you mentioned I did not
find raddb/sites-available/coa.
In 2.1.8, there's an example CoA server in raddb/sites-available/coa
I only see,
# ls -lart sites-available/
total 124
-rw-r- 1 root root 2538 May 14 15:37 vmps
-rw-r-
Eric Martell wrote:
Hi Alan,
Thanks for the reply. Pardon my ignorance but as you mentioned I did
not find raddb/sites-available/coa.
In 2.1.8, there's an example CoA server in raddb/sites-available/coa
Ah... it's in 2.1.9, then.
See http://git.freeradius.org/pre/ for a pre-release
.
Thanks.
--- On Sat, 5/15/10, Alan DeKok al...@deployingradius.com wrote:
From: Alan DeKok al...@deployingradius.com
Subject: Re: COA default configuration...Need help to test radclient
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Date: Saturday, May 15, 2010, 9:43 AM
Hi,
I am using v2.1.8 in SuSE 11.
Question1: I don't have the client and nas environment right now. I want
to input EAP-TTLS and EAP-PEAP (MSCHAPv2) respectively into radclient
(or radtest) to test my freeradius configuration. What should be the input
to radclient (or radtest) (i.e
bslee (HKBU) wrote:
Question1: I don't have the client and nas environment right now. I
want to input EAP-TTLS and EAP-PEAP (MSCHAPv2) respectively into
radclient (or radtest) to test my freeradius configuration. What should
be the input to radclient (or radtest) (i.e. the red string
of this?
It involves looking through the hashes in src/lib/packet.c. It's not
pretty...
well, i have no choice, i should dig it out
Not mentioning radiusd CoA,
i`m pretty puzzled why radclient doesn`t want to handle CoA-ACK from nas..
I don't know... others have got this to work.
i
provide me some tips to do further debug of this?
Not mentioning radiusd CoA,
i`m pretty puzzled why radclient doesn`t want to handle CoA-ACK from nas..
some# /usr/local/bin/radclient -t20 -r 1 -c 1 -f ./coa.rad -x 10.200.27.3:1700
coa su29
Sending CoA-Request of id 223 to 10.200.27.3 port 1700
in src/lib/packet.c. It's not
pretty...
Not mentioning radiusd CoA,
i`m pretty puzzled why radclient doesn`t want to handle CoA-ACK from nas..
I don't know... others have got this to work.
What's the OS / CPU?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org
Hello,
I have a strange problem with CoA-Ack receive
I send test Coa packet to nas (juniper erx), the nas sees the packet and do
corresponding action as well, and sends Coa-Ack back
Nothing strange in nas debug or tcpdump
But radclient says:
some# /usr/local/bin/radclient -t20 -r 1 -c 1 -f
Anton G. wrote:
I have a strange problem with CoA-Ack receive
Which version of the software are you using?
It works for me with the latest git stable tree...
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi
Please could someone help a newbe ...
I'm using the following stack FreeRADIUS Version 2.1.3 with coova-chilli-1.0.13
with Daloradius .
I'm having issues with sending POD from Daloradius and radclient via the
command line
[r...@localhost ~]# echo User-Name='TC-Demo' | radclient -c '1
Am 17.06.2009 um 13:43 schrieb Gregory Machin:
Hi
Please could someone help a newbe ...
I'm using the following stack FreeRADIUS Version 2.1.3 with coova-
chilli-1.0.13 with Daloradius .
I'm having issues with sending POD from Daloradius and radclient via
the command line
[r
I'm using the following stack FreeRADIUS Version 2.1.3 with
coova-chilli-1.0.13 with Daloradius .
I'm having issues with sending POD from Daloradius and radclient via the
command line
Send it to NAS (coova-chilli), not radius server.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe
From: freeradius-users-bounces+gregorym=techconcepts.co...@lists.freeradius.org
[freeradius-users-bounces+gregorym=techconcepts.co...@lists.freeradius.org] On
Behalf Of Ivan Kalik [...@kalik.net]
Sent: Wednesday, June 17, 2009 1:57 PM
To: FreeRadius users mailing list
Subject: Re: radclient
AHMED KHIDR wrote:
Hii All ,
Please Any one have an idea how to make a PHP code to run Radclient
in order to disconnect users ,
Thanks
$Command = 'echo -e User-Name=\'.$UserName.'\, Framed-IP-Address =
\'.$FramedIP.'\, NAS-IP-Address = \'.$NASIP.'\ | radclient -n 1 -r
3 -x '.$RadiusIP
I don't know why bot sometimes radclient uses up to 30% of CPU
radius.log is empty
On Thu, Apr 2, 2009 at 8:14 AM, Patric patri...@gmail.com wrote:
AHMED KHIDR wrote:
Hii All ,
Please Any one have an idea how to make a PHP code to run Radclient in
order to disconnect users
hello to all;
I have a question.. and i hope I'll have a reply or an idea!!
If I have to store my files of configuration (eap, keys, randoms, dh..) in a
usb device, have you an idea: how can I configure my freeradius?
thanks you for your help!
-
List info/subscribe/unsubscribe? See
I have a question.. and i hope I'll have a reply or an idea!!
If I have to store my files of configuration (eap, keys, randoms, dh..) in a
usb device, have you an idea: how can I configure my freeradius?
Best advice - don't do that!!! Certificates are *much* safer on a server
than on a USB device
new conf wrote:
I have a question.. and i hope I'll have a reply or an idea!!
I'll give you an idea:
Dont hijack threads please.
Make the effort of creating a new email from scratch.
Thank you.
--
Chef de projet chez Vectoris
to Mihamina Rakotomandimby (R12y) : it was by inattention.. sorry!
thank you Ivan Kalik for your replay!! I'll send you in another email!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hii All ,
Please Any one have an idea how to make a PHP code to run Radclient in
order to disconnect users ,
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
try
exec() or shell_exec()
2009/4/1 AHMED KHIDR a.kh...@gmail.com:
Hii All ,
Please Any one have an idea how to make a PHP code to run Radclient in
order to disconnect users ,
Thanks
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
--
Random quote
Thanks ,
I tried it but didn't work ,
I found another method ,
Here is the code ,
?
$user=ahmedkhidr;
$nas=1.1.1.2;
$secret=password;
$handle = popen('/bin/echo User-Name='.$user.' | /usr/local/bin/radclient -x
'.$nas.':1700 disconnect '.$secret.' 21', 'r');
$read = fread($handle, 2096);
echo
2.1.5?)
and built it without 'make install' on my AMD64-Machine. The problem in
radclient is fixed, thank you Alan!
I just had to append the new dictionary path in my scripts, because the
dictionaries of my old inst do not work with the new radclient:
./radclient -d /usr/local/src/radiusd/share
Hello,
Alan DeKok wrote:
oz wrote:
for monitoring our radius-servers, I use radclient for a long time in a
script. After migration to another platform, radclient seems to work
else, than before. If a monitored radiusd is down or the Auth of my
monitoring-user fails, radclient gets
Alan DeKok wrote:
oz wrote:
the normal behavior of radclient seems to get lost somewhere in the
versions later than freeradius-0.7, where it worked:
That's nice... but 1.1.x will NOT be fixed.
I've committed a fix that will be in the next release of the server.
If you need
oz wrote:
the normal behavior of radclient seems to get lost somewhere in the
versions later than freeradius-0.7, where it worked:
That's nice... but 1.1.x will NOT be fixed.
I've committed a fix that will be in the next release of the server.
If you need this functionality, upgrade
Alan DeKok wrote:
Uh... you *can* run just radclient from the new version of the server.
You don't have to upgrade the server to run radclient.
Yes, thanks, I built the latest 2.1.4 but it still has the bug:
/usr/local/src/freeradius-server-2.1.4/src/main# ./radclient -d
/usr/local/src
oz wrote:
Thanks, but for some reasons I cannot do updates to the upcoming release
on that server.
Uh... you *can* run just radclient from the new version of the server.
You don't have to upgrade the server to run radclient.
Just make sure that the new version is installed
from that release. It was succesfully built, yeay, but has another bug with
masking the password when it is used in the radtest-script :-/
Sending Access-Request of id 110 to 192.168.X.X:1812
User-Name = testuser
User-Password =
\217\343\361\214\370\326\351$
Not a bug. Shared secret is wrong.
It looks like a wrong shared secret, ...
usr/local/src/freeradius-0.9.2/src/main# ./radclient -d
/usr/local/src/freeradius-0.9.2/share -f /home/me/radpacket -x
192.168.111.18:1812 auth test123
Sending Access-Request of id 20
Hello,
for monitoring our radius-servers, I use radclient for a long time in a script.
After migration to another platform, radclient seems to work else, than before.
If a monitored radiusd is down or the Auth of my monitoring-user fails,
radclient gets an expected answer, but exits
oz wrote:
for monitoring our radius-servers, I use radclient for a long time in a
script. After migration to another platform, radclient seems to work
else, than before. If a monitored radiusd is down or the Auth of my
monitoring-user fails, radclient gets an expected answer, but exits
testing123
radclient:: Failed to find IP address for dhcppc0
radclient: Nothing to send.
I try to test with ping command:
[r...@dhcppc0 ~]# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.046 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64
radclient -f coa-file1 10.18.20.122:3799 coa test
I tried differnt options in COA-file
coa-file1 content:
User-Name = t...@local
Qos-Policy-Metering = (current this policy is active and I want to disable
it)
User-Name = t...@local
Deactivate-Service = QOS-Policy-Metering
Thanks
Jana
-
List info
a service on a active sub.
Here is the example, I am doing
radclient -f coa-file1 10.18.20.122:3799 coa test
I tried differnt options in COA-file
coa-file1 content:
User-Name = t...@local
Qos-Policy-Metering = (current this policy is active and I want to disable
it)
User-Name = t...@local
1 - 100 of 208 matches
Mail list logo