Re: [Freeswitch-users] INVITE no SDP

Sorry I can't help you further. I installed my FS a week ago only. good luck Jair -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of hemant kumar Sent: Friday, July 11, 2008 4:36 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitc

Re: [Freeswitch-users] INVITE no SDP

Yes, its like there is no SDP in INVITE and FS is sending 480. I have tested with other phone, who send INVITE with SDP works fine. On Sat, Jul 12, 2008 at 5:03 AM, Jair Santos <[EMAIL PROTECTED]> wrote: > Looks like is not the same issue > > MANDATORY_IE_MISSING > > > > -Original Message-

Re: [Freeswitch-users] INVITE no SDP

Looks like is not the same issue MANDATORY_IE_MISSING -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of hemant kumar Sent: Friday, July 11, 2008 4:19 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] INVITE no SDP Hi Jair,

Re: [Freeswitch-users] INVITE no SDP

Hi Jair, This is the log in got in console: 008-07-12 03:48:08 [DEBUG] sofia_reg.c:103 sofia_reg_check_gateway() registered [EMAIL PROTECTED] 2008-07-12 03:48:19 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel sofia/external/[EMAIL PROTECTED] 2008-07-12 03:48:19 [DEBUG] sofia.c

Re: [Freeswitch-users] INVITE no SDP

This looks like the same problem I am having. As per Brian it is a NO ROUTE issue. Check your FS console and look for a "switch_core_standard_on_routing() No Route, Aborting" to confirm. Jair Santos -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behal

[Freeswitch-users] INVITE no SDP

Hi All, I have registered freeswitch to an external gateway as a softphone, and it has registered nicely. Now, i had given extension 1000 to freeswitch. When i try to call from external gateway to freeswitch, it always gives Temporarily Unavailable. However, if i register a phone with freeswitch

Re: [Freeswitch-users] Unvoluntary hangup, but OK after restart

you only need the params on profiles that accept inbound registration. you can also try using a dedicated profile for outbound reg and disable all the nat options on it. The nat mode will cause all sip messages to be delivered to the return port that the invite came in on regardless of what the si

Re: [Freeswitch-users] Unvoluntary hangup, but OK after restart

Yes, there is nat involved. And I have those options enabled, in the internal profile, as the calls are coming in on port 5060. Maybe I should set up the server outside the firewall, to avoid this. Ivan Den 11. juli. 2008 kl. 20:51 skrev Anthony Minessale: it's sending it to the wrong place

Re: [Freeswitch-users] Invalid profile

http://www.freeswitch.org/ Join Us on IRC on the right.. thats the fastest way. /b On Jul 11, 2008, at 2:38 PM, Jair Santos wrote: Your suspicious are very well confirmed since I am nothing more than a FS beginner. I am reading over and over the docs trying to have the system working and

Re: [Freeswitch-users] breaking the ice with IVR

Make sure you install all the latest lang for en.. every file... and the latest ivr.conf.xml /b On Jul 11, 2008, at 2:28 PM, Julien Chavanton wrote: > I am making test in order to experiment IVR application with > Freeswitch, > I have spent a few hours trying, reading and searching the wiki.

Re: [Freeswitch-users] Invalid profile

Your suspicious are very well confirmed since I am nothing more than a FS beginner. I am reading over and over the docs trying to have the system working and making some initial testings. I am really grateful for all the work you guys did in the docs but we all know that there are still a lot to

[Freeswitch-users] breaking the ice with IVR

I am making test in order to experiment IVR application with Freeswitch, I have spent a few hours trying, reading and searching the wiki. I am starting by looking for XML or Perl scripting. - How do we call a perl script from a dialplan like "default_context.xml" -

Re: [Freeswitch-users] Invalid profile

That'll match: 10 followed by either 0 or 1 followed by a single further digit. - i.e. 1000 to 1019. To match any number passed, just use (.*) --Dave Thank you and I am sure I am missing the point. It seems to me that if I use ="^(12508606894) I'll be able to call this number only, is that

Re: [Freeswitch-users] Invalid profile

If you're ending up in public.xml then I suspect you don't understand the security model. I fear you're leaving your entire dialplan and server open to the outside world and can lead to toll fraud. I also notice you have changed the defaults and have a double nat profile. You're in the r

Re: [Freeswitch-users] Invalid profile

Thank you and I am sure I am missing the point. It seems to me that if I use ="^(12508606894) I'll be able to call this number only, is that right ? And, I want to call any number. In the public.xml there is Why is this not enough to match any number passed ? Jair Santos -Original M

Re: [Freeswitch-users] Invalid profile

you're hitting the public profile.. so you're hitting 12508606894 in dialplan/public.xml and there is no route for that number in there.. add a route similar to this but make it actually bridge to say a user. expression="^(12508606894)$"> /b On Jul

Re: [Freeswitch-users] Invalid profile

It looks like you figured it out because I am getting this in the FS console 2008-07-11 11:53:53 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing FreeSwitch->[EMAIL PROTECTED] 2008-07-11 11:53:53 [INFO] switch_core_state_machine.c:114 switch_core_standard_on_routing() No Route, Aborting 2

Re: [Freeswitch-users] Unvoluntary hangup, but OK after restart

it's sending it to the wrong place and giving up. is there nat involved? if not, edit your sip profile and comment aggressive-nat-detection and apply-nat-acl both from your config otherwise if you don't have those options set, try enabling them instead. The same problem happens if you are missin

Re: [Freeswitch-users] Invalid profile

This doesn't mean much to me. You'll need to get on IRC and see if we can do this in a more realtime way. On Jul 11, 2008, at 1:44 PM, Jair Santos wrote: From the Xlite log I got this [08-07-11]11:40:02.602 | Info | DNS | "DNS [query: 24.67.78.200:5090]" | sua::CDNS::StartTopologyLookup [0

Re: [Freeswitch-users] Invalid profile

>From the Xlite log I got this [08-07-11]11:40:02.602 | Info | DNS | "DNS [query:24.67.78.200:5090]" | sua::CDNS::StartTopologyLookup [08-07-11]11:40:02.602 | Info | DNS | "DNS-Lookup performed: '_sip._udp.' '24.67.78.200:5090' [default-port:5060][fallback to A/QA:T] - Results:" | sua::CDNS::Inte

Re: [Freeswitch-users] Invalid profile

Where did you put it in the dialplan? At the bottom? You'll wanna put it before the transfer to enum otherwise you'll always get NO ROUTE Location Location Location.. that's what they tell me. /b On Jul 11, 2008, at 1:35 PM, Jair Santos wrote: I am getting "call failed not found" and a voi

Re: [Freeswitch-users] Invalid profile

I am getting "call failed not found" and a voice message saying "The person you are calling is not available". It seems that this error is coming from the provider but the other phone (inside the NAT) can make the calls. I can call the inside the NAT phone from outside. I cannot call the outs

Re: [Freeswitch-users] Unvoluntary hangup, but OK after restart

I updated to latest svn, but exactly the same is happening now. This is a SIP trace from before I restart FreeSWITCH: http://pastebin.freeswitch.org/4796 And here after I restart it: http://pastebin.freeswitch.org/4797 I have done this several times now, and I see that FreeSWITCH always send

Re: [Freeswitch-users] Invalid profile

That should work what kind of error are you seeing. /b On Jul 11, 2008, at 1:24 PM, Jair Santos wrote: I have the following dialplan defined. It works from a phone inside the network. and the following gateway in the directory

Re: [Freeswitch-users] Invalid profile

I have the following dialplan defined. It works from a phone inside the network. and the following gateway in the directory

Re: [Freeswitch-users] Invalid profile

How are you sending calls from your dialplan to your provider? /b On Jul 11, 2008, at 1:02 PM, Jair Santos wrote: Regarding my previous email, I have now the profile registered but still cannot make PSTN calls from the Phone sofia status profile doublenat API CALL [sofia(status profile doub

Re: [Freeswitch-users] Invalid profile

Regarding my previous email, I have now the profile registered but still cannot make PSTN calls from the Phone sofia status profile doublenat API CALL [sofia(status profile doublenat)] output: = Name

Re: [Freeswitch-users] Question about IAX?

I would like to, as I could see it as another way to interoperate and also find more converts... I'd add it myself even but I've been too swamped to do any coding right now. :-/ That being said, SIP+RTP is still my preferred protocol arrangement. -- Yossi Neiman Cartis Solutions, Inc. http://

Re: [Freeswitch-users] Compile and install mod_cdr

Indeed I shall. I've been held up by a number of family events and emergencies, however. Perhaps a little booze at Cluecon will get me to sit down and work on code... oh wait, I'm not like some of our Bender-unit developers who run on alcohol! Anyway, I do indeed to restart development on

[Freeswitch-users] Invalid profile

Hi, I am trying to register a phone in the following scenario: FS (192.168.0.4) -> NAT (Public IP 1.2.3.4) -> INTERNET -> NAT (Public IP 5.6.7.8) -> PHONE (192.168.1.100) I followed the instructions from http://wiki.freeswitch.org/wiki/General_NAT_example_scenarios and have created the profil

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

Is it .. i'll document it if thats it? /b On Jul 11, 2008, at 9:30 AM, Michael Jerris wrote: > Isnt it --without-libcurl ? Brian West sip:[EMAIL PROTECTED] ___ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freesw

Re: [Freeswitch-users] Directed call pickup

The intercept extension in the default dialplan demonstrates this feature. /b On Jul 11, 2008, at 9:10 AM, whudson05 wrote: Hi, I've been looking at using FreeSwitch for the last few days as a PBX. One of the features I'm quite keen on having is directed call pickup. In other words a

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

Isnt it --without-libcurl ? On Jul 11, 2008, at 10:13 AM, Brian West <[EMAIL PROTECTED]> wrote: > You're using curl to post cdr it looks like. Are you using your > system curl or the one we ship? > > reconfigure freeswitch with this flag --without-curl > > The system curl must have been used and

[Freeswitch-users] Directed call pickup

Hi, I've been looking at using FreeSwitch for the last few days as a PBX. One of the features I'm quite keen on having is directed call pickup. In other words answering an extension that is currently ringing by dialing a code and then the extension number. So far I don't seem to have come acro

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

You're using curl to post cdr it looks like. Are you using your system curl or the one we ship? reconfigure freeswitch with this flag --without-curl The system curl must have been used and has some bugs in it.. that flag will make it use the one we ship and known working. /b On Jul 11, 20

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

Wasim, im not writing to HDD at all. I'm doing a curl post from XML-cdr to another server which takes care of the processing. Michael: Updated to svn! Will report back in a few! Wasim Baig wrote: > On Fri, Jul 11, 2008 at 7:55 PM, Faraz R. Khan <[EMAIL PROTECTED] > >

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

There are definately fixes in XML CDR module in trunk that you will want. Please update and let us know if it persists. Mike On Jul 11, 2008, at 9:55 AM, "Faraz R. Khan" <[EMAIL PROTECTED]> wrote: > Core dumped again. With debug logging on the error happens in > mod_xml_cdr looks like : >

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

On Fri, Jul 11, 2008 at 7:55 PM, Faraz R. Khan <[EMAIL PROTECTED]> wrote: > Core dumped again. With debug logging on the error happens in > mod_xml_cdr looks like : recommend allocating a ramdisk to write your cdrs cron can move them to a hdd periodically its a good idea to have the sqlite db i

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

Core dumped again. With debug logging on the error happens in mod_xml_cdr looks like : 2008-07-11 19:47:39 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() Standard HANGUP sofia/external/5350040, cause: NORMAL_CLEARING 2008-07-11 19:47:39 [DEBUG] switch_core_state_machine

Re: [Freeswitch-users] bridge and playback

http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail If set to true will continue on any and all failures. You can provide it a list of hangup causes which our here http://wiki.freeswitch.org/wiki/Hangup_causes Then it will only continue if one of those causes is encountered. Y

Re: [Freeswitch-users] bridge and playback

This piece work! Thank you, I understand how this works now. May be I must paste this example in wiki? From wiki I cant understand how I must use this continue on file. -- С уважением, Кривушин Михаил Евге

Re: [Freeswitch-users] bridge and playback

В сообщении от Friday 11 July 2008 17:43:00 Brian West написал(а): > Give this a try. hangup_after_bridge is implied if you > continue_on_fail. And you usually don't want to continue if the first > call is answered and hungup properly. > Dont work in right way - after talking over local extension

Re: [Freeswitch-users] bridge and playback

Give this a try. hangup_after_bridge is implied if you continue_on_fail. And you usually don't want to continue if the first call is answered and hungup properly. data="continue_on_fail=NORMAL_TEMPORARY_FAILURE,USER_BUSY,NO_ANSWER"/>

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

I would highly recommend it. /b On Jul 11, 2008, at 4:19 AM, Faraz R. Khan wrote: > No, I'm running the phoenix 1.0.0 tarball release > > Should I go to SVN? ___ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswi

Re: [Freeswitch-users] bridge and playback

I try this dialplan, dont work. What I missing? -- С уважением, Кривушин Михаил Евгеньевич Системный администратор ЗАО "СОЮЗ Т" тел. +7 913 865 7 866 jid: [EMAIL PROTECTED] icq: 218 7

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

will do. My point was that I doubt freeswitch is SO broken :) I have a pretty small lightweight network. I think there is something in my configuration thats probably causing it as Im sure it hasnt happened to anybody else over here. Im guessing its either the Xen DomU part or the Ubuntu Hardy

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

On Fri, Jul 11, 2008 at 3:19 PM, Faraz R. Khan <[EMAIL PROTECTED]> wrote: > No, I'm running the phoenix 1.0.0 tarball release > > Should I go to SVN? I would recommend trying it to see if the issue still exists with current svn ... -- wasim h. baig | principal consultant | convergence pk | +92

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

No, I'm running the phoenix 1.0.0 tarball release Should I go to SVN? Brian West wrote: > It won't save you in this case. Are you sure you're running the > latest code? > > /b > > On Jul 11, 2008, at 3:16 AM, Faraz R. Khan wrote: > >> If you read the earlier posts - I initially thought tha

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

It won't save you in this case. Are you sure you're running the latest code? /b On Jul 11, 2008, at 3:16 AM, Faraz R. Khan wrote: > If you read the earlier posts - I initially thought that phones losing > power all of a sudden was causing FS to crash. However that is not the > case as it also

[Freeswitch-users] bridge and playback

I want to realise next scheme: 1. try call (bridge) to local extensions 2. if no one answer in 20s playback wav with attention to wait 3. bridge to mobile phone I dont understand - I must set ? If I set this and leg b hangup (dont answer or normal clearing) playback will execute? How I can do 2&3

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

If you read the earlier posts - I initially thought that phones losing power all of a sudden was causing FS to crash. However that is not the case as it also crashed randomly this morning with all phones working. I have also enabled 'crash protection' in switch.xml - dont know what it does but

Re: [Freeswitch-users] Core dump: Seg 11 if phones get powered off

what phone? and can you start a sip trace and dump it to a file? So we can see the traffic that its receiving. /b On Jul 11, 2008, at 12:27 AM, Faraz R. Khan wrote: > Hmm. I dont think it has anything to do with my phone powered off > theory- happened again this morning. I have turned debug lo