Try to issue the same command, what you are issuing via rpc, directly on
freeswitch console. And don't forget to enable the debug mode this time. You
can enable debug anytime by pressing F8 on freeswitch console.
Cheers.
On Wed, Aug 27, 2008 at 1:41 PM, Gayatri Kulkarni [EMAIL PROTECTED]wrote:
same result
Regards,
Gayatri Kulkarni
From: Adeel Ansari
Sent: Tuesday, August 26, 2008 11:03 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] How to originate a session from outside
Try to issue the same command, what you are issuing via rpc, directly on
Here goes:
[EMAIL PROTECTED] originate sofia/internal/1001 sofia/internal/1003 (my
command)
2008-08-26 23:36:01 [NOTICE] switch_channel.c:534 switch_channel_set_name() New
Channel sofia/internal/1001 [e11e956a-13dd-de42-b2a1-89733eaaff5d]
2008-08-26 23:36:01 [NOTICE] sofia.c:2183
Hi
iam just thinking new setup
replacing Asterisk with Freeswitch in my lab setup
I want to users to register with Openser(opensips) and PSTN/
VoIP Termination with FS
users--Openser--Number of FS Boxes
Does any one deployed sucessfully the above said setup
If so kindly recomend me
Hi Yuval,
Thank you very much!
What Nuance engine do you use? ASR? SV? Both?
The thing is, I am looking for affordable ASR and SV engines and I do not like
Nuance approach... They behave as what they are: a monopoly.
This is opposed to Tier-1 which can pay and want the best. My application is
How high is high? Numbers?
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of EdPimentl
Sent: Tuesday, August 26, 2008 10:11 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] anybody done nuance mrcp?
I hope you have also lots of experience in providing
Try this,
*originate sofia/internal/1001 bridge(sofia/internal/1003*)
Cheers.
On Wed, Aug 27, 2008 at 2:38 PM, Gayatri Kulkarni [EMAIL PROTECTED]wrote:
Here goes:
[EMAIL PROTECTED] *originate sofia/internal/1001 sofia/internal/1003 *(my
command)
2008-08-26 23:36:01 [NOTICE]
I think I’ve heard the figure of EU3000 per port few years back.
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shlomi
Hazan
Sent: Wednesday, August 27, 2008 5:15 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] anybody done nuance mrcp?
Show your program. Further, try the example given in here after appropriate
modification.
http://wiki.freeswitch.org/wiki/Freeswitch_XML-RPC#Java_Example
On Wed, Aug 27, 2008 at 3:56 PM, Gayatri Kulkarni [EMAIL PROTECTED]wrote:
Thanks a lot!
it worked - *but why?*
When I did the same thing
Tom,
Configuration: that should be easy using XML CURL to load what would
otherwise be in the conf/ XML files. I would strongly recommend looking
at this.
Call state I wouldn't like to comment on, I have not looked into it. I
would imagine it's unlikely to succeed based on the uuid of each call
Hi,
This is due to missing doPost() in my servlet.
It is fixed now. Please ignore.
Thanks,
JB
On Wed, Aug 27, 2008 at 5:03 PM, Juan Backson [EMAIL PROTECTED] wrote:
Hi,
I am trying to get Freeswitch to post CDR to HTTP using xml_cdr_mod.
Here is the error in console:
2008-08-28 01:13:11
Juan Backson wrote:
Hi,
I am trying to get Freeswitch to post CDR to HTTP using xml_cdr_mod.
Here is the error in console:
2008-08-28 01:13:11 [DEBUG] mod_sofia.c:264 sofia_on_hangup() Channel
sofia/internal/[EMAIL PROTECTED] hanging up, cause: NORMAL_CLEARING
2008-08-28 01:13:11
Hello,
I have a problem with multiple domains.
[WARNING] sofia_reg.c:1251 sofia_reg_parse_auth() can't find user
[EMAIL PROTECTED]
You must define a domain called '192.168.1.37' in your directory and add
a user with the id=cstomi attribute
and you must configure your device to use the proper
Hi Anthony,
Thanks for your help. I can now send out custom message, but I am still not
able to specify the content I want, such as Event_Type etc.
I tried the following, but still it does not work:
e = freeswitch.Event(message);
e:addBody(Event-Name=TestEvent)
Hi, Regarding HA, I don't suppose you'll be able to go without any
front-end, beacuse of IP-connectivity reasons, if you plan to work in
active-standby mode . Active box needs to have an unique IP, otherwise
each client will have to have 2 (or more) IP addresses configured.
As solution you can use
W dniu 27 sierpnia 2008 13:48 użytkownik James Green
[EMAIL PROTECTED] napisał:
Łukasz Zwierko wrote:
Hi, Regarding HA, I don't suppose you'll be able to go without any
front-end, beacuse of IP-connectivity reasons, if you plan to work in
active-standby mode . Active box needs to have an
Łukasz Zwierko wrote:
OSPF what? What I am talking about was to have TWO FS machines runnig
in active- standby mode, without having this configuration displayed
to users. Simplest solution for that is having the same virtual IP on
both boxes, and directing the traffic to only one of them. OSPF
local event = freeswitch.Event(message_waiting); -- -- This is the
event NAME
event:addHeader(MWI-Messages-Waiting, no);
event:addHeader(MWI-Message-Account, sip:[EMAIL PROTECTED]);
event:fire();
/b
On Aug 27, 2008, at 4:48 AM, Juan Backson wrote:
Hi Anthony,
Thanks for your help. I
Łukasz Zwierko wrote:
External monitoring would be better, system might hang up, interface
could remain up.
Wherein lay an additional problem. Should the system be under severe
load, the system may appear to hang, indeed become unreachable
temporarily. Do you remove the host or check for a
also,
local event = freeswitch.Event(custom, my::event);
event:addHeader(My-Header, test);
event:fire();
On Wed, Aug 27, 2008 at 8:41 AM, Brian West [EMAIL PROTECTED] wrote:
local event = freeswitch.Event(message_waiting); -- -- This is the
event NAME
event:addHeader(MWI-Messages-Waiting,
Let me wiki this one. If its not already up on the wiki.
On Aug 27, 2008, at 9:39 AM, Anthony Minessale wrote:
local event = freeswitch.Event(custom, my::event);
Brian West
sip:[EMAIL PROTECTED]
___
Freeswitch-users mailing list
You need to make a dedicated profile so you can disable auth on it and make
it a public dialplan.
Then send it to a private context in the dialplan that only transfers your
DID into your box to prevent access to any of your other extensions.
On Wed, Aug 27, 2008 at 10:11 AM, Ivan C Myrvold
Oh, that was the missing link. Thanks!
You guys are really helpful.
Ivan
Den 27. aug.. 2008 kl. 17:21 skrev Brian West:
It's only going to come in where you told it in the record you setup
with e164.org. So append the :5080 or what ever on the records on
their website.
/b
On Aug 27,
please file a bug on http://jira.freeswitch.org for this.
Mike
On Aug 27, 2008, at 9:44 AM, Sluschny, Thomas wrote:
Hi,
i want to use the new FreeSwitch version 1.0 (Rev8701) and yes, i
tested also the new one today (Rev9371):
if an incoming call received, cpu load goes to 100%. And if i
Any fsapi commands, the same commands that are available at the cli
(type help for a full list) are available via xmlrpc. DTMF comes as
real time events, you can subscribe to them on the event socket.
Mike
On Aug 27, 2008, at 11:08 AM, Klaus Teller wrote:
Hi,
It seems i can send
Hi,
where I define the domain ?
I am trying to cal the user 1000 from an external user and I am getting
[WARNING] mod_sofia.c:1949 sofia_outgoing_channel() Cannot locate
registered user [EMAIL PROTECTED]
The user 1000 is configured in the domain voipclic and I am calling using
extension
Well in this case you still have the IP in the client trying to
register instead of the domain.
/b
On Aug 27, 2008, at 1:05 PM, Cliconnect wrote:
Hi,
where I define the domain ?
Brian West
sip:[EMAIL PROTECTED]
___
Freeswitch-users mailing
Outbound.My freeswitch pbx uses a dynamic IP.
On Wed, Aug 27, 2008 at 5:06 PM, Brian West [EMAIL PROTECTED] wrote:
Is this an outbound registration? Or inbound to FreeSWITCH?
/b
On Aug 27, 2008, at 4:07 AM, Unai Uribarri wrote:
Hello,
I'm trying to register freeswitch 1.0.1 to
You add it to the bridge line
action application=bridge data=sofia/blah/[EMAIL PROTECTED];transport=tls/
/b
On Wed, Aug 27, 2008 at 3:24 PM, Peter P GMX [EMAIL PROTECTED] wrote:
Hello Brian,
I tried to set ;transport=tls on the sofia string and it showed me an
invalid gateway
So I
Wow, this has turned into quite a debate.
I think HA could be the killer app that catapults FS into the
mainstream. Even if not full implemented today, laying the groundwork
to allow for call state synchronization with a standby box would be a
great leap ahead of any other platform I'm aware of.
Hi
The error that I am getting is :
2008-08-28 19:04:41 [CRIT] switch_odbc.c:248 db_is_up() The sql server is
not responding for DSN fsdb [STATE: 24000 CODE 0 ERROR:
[unixODBC][MySQL][ODBC 3.51 Driver][mysqld-5.0.32-Debian_7etch6]Invalid
cursor state
I am sure fsdb is correct as I can do the
31 matches
Mail list logo
