We have connected FS to a Siemens Hicomm 300. As you might guess, it's
not working right. Here is what we are working with.
Dell 1750 (dual socket, dual core Xeon 2.8GHz)
Debian 5
FS (15029), OpenZAP (without libpri)
TE110P T1 card (Zaptel driver)
Handles 71xx extensions
Siemens Hicom 300
TMDN64P
Anthony Minessale said:
> You might want to try the ozmod_pri instead of ozmod_isdn until the new
> revision of ozmod_isdn is published into the source tree.
libpri took care of the problem with the transfer. Now, someone can call
into FS from the Hicomm and then transfer the call to another ext
Michael Collins said:
> > I believe the "OpenZAP" and "1" are coming from your conf file:
> openzap.conf
> [span zt PRI_1]
> name => OpenZAP
> number => 1
That is correct. If that information is removed, then X-Lite displays
FreeSWITCH
[Other: 00]
Are there any variables to set to get
Michael Collins said:
> do something like:
> name => XYZ Corp
> number => 8005551212
I was expecting that information to be filled with the caller name and
number. It doesn't really help if someone calls from outside the
business, and it looks like my business is calling me. Doesn't OpenZAP
extr
lakshmanan said:
> Thanks for pointing that.
> I also tried that.
> But in that case, I'm not able to make a call through openzap.
What is in openzap.conf.xml? If you start fs_cli and enter "oz list",
what does it show? Copy the ozmod lines from freeswitch.log to
pastebin.freeswitch.org and post
Michael Collins said:
> Confirmed: the Hicomm isn't sending anything at all in the SETUP message
> except the usual stuff: dialed number, channel number, etc. Does the Hicomm
> have any config parameters, like Caller ID presentation?
I believe it does, but I don't have access to the Hicom. I hav
Michael Collins said:
> If you need proverbial ammo let me know. If he speaks Q931 then your
> pastebin is the ultimate proof for him that the hicom is not sending any
> caller ID info. In any case, I'm here if you need assistance.
Heh, I have the exact opposite problem. I don't think he configu
lakshmanan ganapathy said:
> When I make an outgoing call, it is saying INVALID_IE_CONTENTS.
> Here are the details.
There are a couple of things that might be OK, but they seem odd. When
ozmod starts, the first 15 channels can't be configured, because they are
busy. The output from "oz list" sh
lakshmanan ganapathy said:
> On incomming call, I just call an event outboud socket. But what
happens is,
> for the first 15 call, it is working fine. But from the 16th call to 30th
> call, it says the below error.
What is displayed with
ztcfg -vv
What is displayed with
cat /proc/zaptel/1
lakshmanan ganapathy said:
> But still I'm facing problem with the outgoing call. It says
> INVALID_IE_CONTENTS.
> What might be the issue? Even I tried the following dialplan to call by
> using bridge.
>
>expression="^(\d{10})$">
>
>
lakshmanan ganapathy said:
> What difference it will make, if I use pri_span configuration and lib_pri
> span configuration in openzap.conf.xml.
> I'm preety much confused on the difference between this.
Openzap can handle a T1/E1 itself, or openzap can use libpri to do that.
libpri is more matur
Michael Collins said:
> On Sat, Oct 10, 2009 at 8:18 PM, mayamatakeshi
wrote:
>
> >
> >
> > On Fri, Oct 9, 2009 at 10:42 AM, Michael Collins
wrote:
> >
> >> FYI,
> >>
> >> The FreeSWITCH devs have added valet parking! Check it out:
> >> http://www.freeswitch.org/node/207
> >>
> >> Let us know wh
lakshmanan ganapathy said:
> I was struggling to originate a call from the CLI.
> originate openzap/1/1/9952248266 openzap/1/1/9952248266 says "No route.
> Aborting".
The syntax is incorrect.
originate openzap/1/1/9952248266
For example,
openzap/1/1/9952248266 1234
See the wiki for details
Lars Zeb said:
> I don't think I have a proxy. It's pretty standard installation.
Is the phone itself configured to use a proxy?
--
Russell Mosemann
Concordia University, Nebraska
See http://www.cune.edu/ for the latest news and event
Lars Zeb said:
> I don't think Bria is set to use a proxy.
>
> In the SIP Account/Account tab, it is set to "Register with domain and
> receive calls" and "Send outbound via" is set to use Domain rather than
> "Proxy Address".
>
> The Account ID is set to 1...@192.168.10.29, where the IP is the
Lars Zeb said:
> I tried dial sip:e...@iptel.org. In the pastebin you can see that this
> address came over to the cli as "echo". Is it Bria which is messing up, or
> my FS configuration?
It looks like a Bria problem. If you open the account information and go
to the Advanced tab, is the box che
Debian 5.0.3
FreeSWITCH Version 1.0.trunk (15376M)
openzap and libpri-1.4.10.2
dahdi-linux-complete-2.2.0.2+2.2.0
Digium Wildcard TE110P T1/E1 Card (running as a T1)
This was working with zaptel. I thought that I would upgrade from zaptel
to DAHDI, but it's generating "no such device or address" e
> I thought that I would upgrade from zaptel to DAHDI,
After I send the message, the answer comes to me. I guess that's the way
things work. :-) I had forgotten to define the channels in
/etc/dahdi/system.conf. Here are the settings, and things are working.
Thanks for listening. :-)
span=1,1,0,es
Dave Stevenson said:
> ^([1-3][1-9][0-9]|[2-3][0-9][0-9])$
Another possibility.
^(1(0[1-9]|[1-9]\d)|[2-3]\d{2})
--
Russell Mosemann
Concordia University, Nebraska
See http://www.cune.edu/ for the latest news and events!
___
>
> ...
>But I see that 9 still exists.
Put the parentheses around the portion you want to capture.
http://wiki.freeswitch.org/wiki/Regular_Expression
--
Russell Mosemann
Concordia University, Nebraska
See http://www.c
Dave Stevenson said:
> I have pasted a dump in the pastebin,
URL?
--
Russell Mosemann
Concordia University, Nebraska
See http://www.cune.edu/ for the latest news and events!
___
FreeSWITCH-
Piotr Żurek said:
> This is a repost. I'm having difficulties communicating with this list=20
> (I'm getting reports from the list saying something about "excessive=20
> bounces"...), so I'm not sure anybody got this message.
1. http://lists.freeswitch.org/pipermail/freeswitch-users/
2. Click t
"Joseph L. Casale" said:
> >Just remove the terminating '/' at the end of the second condition tag
> >
> >
>
> I tried to see based on examples if it was obvious to me why that
should not be there
> but it didn't jump out:) Cuold you explain that please?
It is a multi-line condition. If a c
Fred-145 said:
> Has someone succesfully installed Dahdi without Asterisk?
Of course, and it's working like a charm. DAHDI is a driver. It doesn't
care what software uses it. We're using DAHDI with a TE110P PRI T1 card.
What is in /proc/dahdi? If it shows "1", what do you see if you "cat
/proc/da
Fred-145 said:
> 5. vi modules:
> wcfxo
> wctdm
> dahdi
You only need one of the modules above, if you have one card. I don't see
a "dahdi" module listed in the file here.
> 8. ls -la /proc/dahdi/
You should be able to cat the file in that directory for more information.
--
Russell Mosemann
Fred-145 said:
> For those interested, here's how to compile and install Dahdi
It would be helpful to others if you add the results of your efforts to
the wiki.
--
Russell Mosemann
Concordia University, Nebraska
See http://www.cune.ed
Brian West said:
> The fun part comes when you try to link that 32bit .a file into a
> 64bit so file.
That would require a dual-core processor. One core would be 32 bit and
the other core would be 64 bit. ;-)
--
Russell Mosemann
Con
27 matches
Mail list logo
