I wonder if he run "make current" from his 1.0.4 source file, it should update to the current trunk, wasn't it?Dorn.From: Diego Viola diego.vi...@gmail.comTo: freeswitch-users@lists.freeswitch.orgSent: Thu, October 22, 2009 10:15:21 PMSubject: Re: [Freeswitch-users] Core Dump question!He
, October 22, 2009 10:15:21 PM
Subject: Re: [Freeswitch-users] Core Dump question!
He's running 1.0.4, he needs to checkout from SVN trunk and build FS
from scratch.
Diego
On Fri, Oct 23, 2009 at 4:00 AM, Mark Campbell-Smith
mcampbellsm...@gmail.com
wrote:
I think the (exported) means
.
From: Diego Viola diego.vi...@gmail.com
To: freeswitch-users@lists.freeswitch.org
Sent: Thu, October 22, 2009 10:15:21 PM
Subject: Re: [Freeswitch-users] Core Dump question!
He's running 1.0.4, he needs to checkout from SVN trunk and build FS
from scratch.
Diego
On Fri, Oct 23
freeswi...@ss_freeswitch sofia_gateway_data
Segmentation fault (core dumped)
Just ran the gateway command above w/o any parameters,,, and it core dumped..
I am sure mistakes like that happen...but I not sure if it should core dump
and shutdown.
What SVN rev of FS? What operating system? If you're not on the latest then
do a make current and get to the latest SVN and see if you can replicate
the issue.
-MC
On Thu, Oct 22, 2009 at 12:45 PM, Ujjval Karihaloo
ujj...@simplesignal.comwrote:
freeswi...@ss_freeswitch sofia_gateway_data
I did test this on trunk and it seems to work right:
freeswi...@default sofia_gateway_data
-ERR Parameter missing
Mike
On Oct 22, 2009, at 3:58 PM, Michael Collins wrote:
What SVN rev of FS? What operating system? If you're not on the
latest then do a make current and get to the latest SVN
: [Freeswitch-users] Core Dump question!
I did test this on trunk and it seems to work right:
freeswi...@default sofia_gateway_data
-ERR Parameter missing
Mike
On Oct 22, 2009, at 3:58 PM, Michael Collins wrote:
What SVN rev of FS? What operating system? If you're not on the latest then do
Yes, if this is latest SVN (after a make current) then open a jira.
-MC
On Thu, Oct 22, 2009 at 5:04 PM, Ujjval Karihaloo
ujj...@simplesignal.comwrote:
I do have the core dump, should I open a ticket.
I am running latest Freeswitch 1.0.4 and had done a make current just
before it happened.
://www.simplesignal.com/
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Michael
Collins
Sent: Thursday, October 22, 2009 6:26 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Core Dump question
, October 22, 2009 6:26 PM
*To:* freeswitch-users@lists.freeswitch.org
*Subject:* Re: [Freeswitch-users] Core Dump question!
Yes, if this is latest SVN (after a make current) then open a jira.
-MC
On Thu, Oct 22, 2009 at 5:04 PM, Ujjval Karihaloo ujj...@simplesignal.com
wrote:
I do have
, October 22, 2009 9:04 PM
*To:* freeswitch-users@lists.freeswitch.org
*Subject:* Re: [Freeswitch-users] Core Dump question!
Type version on the CLI.
On Fri, Oct 23, 2009 at 2:52 AM, Ujjval Karihaloo ujj...@simplesignal.com
wrote:
How do I tell if it’s the latest…I downloaded is yesterday
://www.simplesignal.com/
*From:* freeswitch-users-boun...@lists.freeswitch.org [mailto:
freeswitch-users-boun...@lists.freeswitch.org] *On Behalf Of *Diego Viola
*Sent:* Thursday, October 22, 2009 9:04 PM
*To:* freeswitch-users@lists.freeswitch.org
*Subject:* Re: [Freeswitch-users] Core Dump
That backtrace is not useful because gdb was unable to locate the freeswitch
binary.
Since you are running it from /opt/freeswitch/bin directory, don't use
'bin/freeswitch' to point gdb to the binary:
gdb freeswitch corefile
On Mon, Jul 27, 2009 at 1:40 AM, Baskar yudha2...@gmail.com wrote:
*Hi Rupa,
I get core dump segmentation fault in freeswitch machine frequently. can
any one assist me what is error in the freeswitch. i have pasted the logs in
freeswitch pastebin.
This is the link
http://pastebin.freeswitch.org/9854http://pastebin.freeswitch.org/9851
Can some one assist me
Did you read his response to you? Please generate a usable backtrace
as rupa explained and post a bug to jira freeswitch.org
On Jul 27, 2009, at 9:00 AM, Baskar yudha2...@gmail.com wrote:
Hi Rupa,
I get core dump segmentation fault in freeswitch machine
frequently. can any one assist
Again, I like I have to say weekly, Please do not report bugs on the mailing
list.
http://jira.freeswitch.org
Also, please completely re-checkout and rebuild latest trunk and erase your
prior freeswitch install before filing the jira.
We only accept bug reports of this nature confirmed on a fresh
Hello
I have a problem with core dumped with signal 6 Aborted
in gdb looks:
Core was generated by `/usr/local/freeswitch//bin/freeswitch'.
Program terminated with signal 6, Aborted.
#0 0xb7f4f410 in __kernel_vsyscall ()
#1 0xb7c11085 in raise () from
I would update to SVN trunk and try again chances are this has already
been fixed. If it happens after you update please report bugs to http://jira.freeswitch.org
Thanks,
Brian
On May 20, 2009, at 7:48 AM, Mariusz Kołodziejczyk WP wrote:
Hello
I have a problem with core dumped with signal
http://wiki.freeswitch.org/wiki/Reporting_Bugs
Keith,
Please read the link above... open a jira and collect a sip trace of
this also and attach it.
/b
On Mar 16, 2009, at 8:36 AM, Keith Laaks wrote:
Hi,
I am on fs 1.0.trunk (12530M) testing G.722 and found that when
using a ‘broken’
What is the process for capturing and submitting a core dump?
I am messing around with the Cisco 79x1 phones and tcp and multiple reg.
I have a 7961 using tcp and a 7960 using udp both reg'd with the same
number and both showing up as registered. If I call out from the phone
using tcp, it
Check out this page:
wiki.freeswitch.org/wiki/Debugging_Freeswitch
-MC
Sent from my iPhone
On Dec 18, 2008, at 6:38 AM, pe...@networkoblivion.com
pe...@networkoblivion.com
wrote:
What is the process for capturing and submitting a core dump?
I am messing around with the Cisco 79x1 phones
If anybody wants to look at the core dump in gdb, here it is (the actual
core is 256Meg):
http://pastebin.freeswitch.org/6476
I know zip about debugging and gdb, but from looking through it, I see a
segmentation fault and it appears to be thread 15094. The last three
items in the bt full for
Is this a single occurrence or can you make it happen consistently?
-MC
Sent from my iPhone
On Dec 18, 2008, at 7:36 AM, pe...@networkoblivion.com
pe...@networkoblivion.com
wrote:
If anybody wants to look at the core dump in gdb, here it is (the
actual
core is 256Meg):
Peder,
Can you join us on IRC.
/b
On Dec 18, 2008, at 9:36 AM, pe...@networkoblivion.com wrote:
If anybody wants to look at the core dump in gdb, here it is (the
actual
core is 256Meg):
http://pastebin.freeswitch.org/6476
I know zip about debugging and gdb, but from looking
Can you answer the questions and possibly go online on IRC so we can debug
your issue?
On Thu, Dec 18, 2008 at 9:36 AM, pe...@networkoblivion.com
pe...@networkoblivion.com wrote:
If anybody wants to look at the core dump in gdb, here it is (the actual
core is 256Meg):
I can make it happen on demand. All I have to do is call the shared
number and it crashes. I'll hop on IRC in a bit.
Michael S Collins wrote:
Is this a single occurrence or can you make it happen consistently?
-MC
Sent from my iPhone
On Dec 18, 2008, at 7:36 AM,
My Freeswitch on an 64bit Ubuntu server crashed with a core dump and
there are no infos in the log. Sometimes it crashes while loading the
codecs, sometimes it finishes loading and then crashes.
After all prerequisites were finished it compiled and installed well.
But program execution crashes:
Yes,
There is an issue with the ncurses lib in that distro.
First, install the latest ncurses-devel package for Ubuntu, then rebuild the
libedit in FS
Once you have installed the ncurses-devel package, CD to the dir where you
build FS and do the following:
# cd libs/libedit
# make clean
# sh
Many thanks,
now now it works
Best regards
Peter
Anthony Minessale schrieb:
Yes,
There is an issue with the ncurses lib in that distro.
First, install the latest ncurses-devel package for Ubuntu, then
rebuild the libedit in FS
Once you have installed the ncurses-devel package, CD to
I have updated the Wiki page
http://wiki.freeswitch.org/wiki/Enterprise_deployment_Xen
with this 'Caveat'.
Faraz R. Khan wrote:
That fixes my problem. FS has been on and working fine for the last 24
hours. Thank you guys!
Brian West wrote:
Try without -hp also.
/b
On Jul 14,
That fixes my problem. FS has been on and working fine for the last 24
hours. Thank you guys!
Brian West wrote:
Try without -hp also.
/b
On Jul 14, 2008, at 11:02 PM, Faraz R. Khan wrote:
Got a fresh core dump for you with recent SVN! Attached to FSCORE 155.
The bt doesnt seem to
Brian,
the core dump posted On Jira is with crash protection off.
I am going to try all of this without the '--enable-64' and on a debian
etch non-xen machine to be sure.
Brian West wrote:
You'll also have to turn off crash protection so we get a core dump we
can poke and prod at ...
/b
One happened at 16:58 and another one at 17:55 so I was just wondering.
Both times there were zero calls in the system.
Wasim Baig wrote:
On Sat, Jul 12, 2008 at 5:24 PM, Faraz R. Khan [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
amazing. it crashed again
I am dumb
Until we figure out your issue please do not enable crash protection.
You need to post a bt every time you get a core. They are not always the
same.
Please post any and all back traces you have encountered since the last time
you updated.
Once you update the core files become unusable so be
Got a fresh core dump for you with recent SVN! Attached to FSCORE 155.
The bt doesnt seem to have anything to do with mod_xml_cdr.
Anthony Minessale wrote:
Right, i saw that one already but that is just 1 and it's from old code.
I need the bt from the latest trunk or it's more or less useless
Segfault again with freeswitch SVN, happened in 3 hours of installing
it! Relevant debug logs:
ia/internal/[EMAIL PROTECTED]
2008-07-11 22:49:43 [CRIT] switch_core_state_machine.c:218 print_trace()
Obtained 10 stack frames.
/usr/local/freeswitch-svn/lib/libfreeswitch.so.1 [0x7f76807594e3]
Interesting. Just tested my Freeswitch SVN with system libcurl using
sipp uac.
1000 calls created, 10ms call duration, 5 calls per second. at 30
concurrent channels.
No crash, no voice distortion (I also created simultaenous conferences
to check call quality).
I am not too worried about the
On Sat, Jul 12, 2008 at 5:24 PM, Faraz R. Khan [EMAIL PROTECTED]
wrote:
amazing. it crashed again
I am dumb founded. It can process thousands of calls through sipp
without problems. I have a sipp running right now and it has processed
thousands of calls. This time the crash happened on
You'll also have to turn off crash protection so we get a core dump we
can poke and prod at ...
/b
On Jul 12, 2008, at 7:06 AM, Wasim Baig wrote:
On Sat, Jul 12, 2008 at 5:24 PM, Faraz R. Khan
[EMAIL PROTECTED] wrote:
amazing. it crashed again
I am dumb founded. It can process
what phone? and can you start a sip trace and dump it to a file? So
we can see the traffic that its receiving.
/b
On Jul 11, 2008, at 12:27 AM, Faraz R. Khan wrote:
Hmm. I dont think it has anything to do with my phone powered off
theory- happened again this morning. I have turned debug
If you read the earlier posts - I initially thought that phones losing
power all of a sudden was causing FS to crash. However that is not the
case as it also crashed randomly this morning with all phones working.
I have also enabled 'crash protection' in switch.xml - dont know what it
does but
It won't save you in this case. Are you sure you're running the
latest code?
/b
On Jul 11, 2008, at 3:16 AM, Faraz R. Khan wrote:
If you read the earlier posts - I initially thought that phones losing
power all of a sudden was causing FS to crash. However that is not the
case as it also
No, I'm running the phoenix 1.0.0 tarball release
Should I go to SVN?
Brian West wrote:
It won't save you in this case. Are you sure you're running the
latest code?
/b
On Jul 11, 2008, at 3:16 AM, Faraz R. Khan wrote:
If you read the earlier posts - I initially thought that phones
On Fri, Jul 11, 2008 at 3:19 PM, Faraz R. Khan [EMAIL PROTECTED]
wrote:
No, I'm running the phoenix 1.0.0 tarball release
Should I go to SVN?
I would recommend trying it to see if the issue still exists with current
svn ...
--
wasim h. baig | principal consultant | convergence pk | +92 300
will do. My point was that I doubt freeswitch is SO broken :) I have a
pretty small lightweight network. I think there is something in my
configuration thats probably causing it as Im sure it hasnt happened to
anybody else over here.
Im guessing its either the Xen DomU part or the Ubuntu Hardy
Core dumped again. With debug logging on the error happens in
mod_xml_cdr looks like :
2008-07-11 19:47:39 [DEBUG] switch_core_state_machine.c:46
switch_core_standard_on_hangup() Standard HANGUP sofia/external/5350040,
cause: NORMAL_CLEARING
2008-07-11 19:47:39 [DEBUG]
There are definately fixes in XML CDR module in trunk that you will
want. Please update and let us know if it persists.
Mike
On Jul 11, 2008, at 9:55 AM, Faraz R. Khan [EMAIL PROTECTED]
wrote:
Core dumped again. With debug logging on the error happens in
mod_xml_cdr looks like :
Wasim,
im not writing to HDD at all. I'm doing a curl post from XML-cdr to
another server which takes care of the processing.
Michael: Updated to svn! Will report back in a few!
Wasim Baig wrote:
On Fri, Jul 11, 2008 at 7:55 PM, Faraz R. Khan [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
Isnt it --without-libcurl ?
On Jul 11, 2008, at 10:13 AM, Brian West [EMAIL PROTECTED] wrote:
You're using curl to post cdr it looks like. Are you using your
system curl or the one we ship?
reconfigure freeswitch with this flag --without-curl
The system curl must have been used and has
Is it .. i'll document it if thats it?
/b
On Jul 11, 2008, at 9:30 AM, Michael Jerris wrote:
Isnt it --without-libcurl ?
Brian West
sip:[EMAIL PROTECTED]
___
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
This seems to happen nightly. Let me explain the scenario, this is a
third world country and power outages happen regularly. The UPS on which
the phones are may die (and i'm sure it does). Seems like freeswitch
segfaults when it cannot find these phones! (This is just my analysis-
as
On Fri, Jul 11, 2008 at 10:50 AM, Faraz R. Khan [EMAIL PROTECTED]
wrote:
This seems to happen nightly. Let me explain the scenario, this is a
third world country and power outages happen regularly. The UPS on which
the phones are may die (and i'm sure it does). Seems like freeswitch
segfaults
Hi guys,
Happy Independence Day and all that. Having some probs in 8899 which I
hadn't seen in previous builds - when running with console and
shutting down I get a stack of error messages that certain modules
don't have a shutdown routine. For example:
2008-07-05 19:51:04 [CONSOLE]
Can you get a backtrace of the core dump?
Who's house?
/b
On Jul 4, 2008, at 12:57 PM, Alex Kinch wrote:
Hi guys,
Happy Independence Day and all that. Having some probs in 8899 which I
hadn't seen in previous builds - when running with console and
shutting down I get a stack of error
/me looks at Mr. MikeJ on this one. :P
Can you open a Jira on this please?
/b
PS: cider is good!
On Jul 4, 2008, at 1:24 PM, Alex Kinch wrote:
Don't you start the 'who's house' thing otherwise I'll be forced, or
perhaps even delighted - to post the link to the YouTube vid :) Note
to the
Can you try a 'make current' to ensure we have no code skew.
/b
On Jul 4, 2008, at 1:24 PM, Alex Kinch wrote:
Don't you start the 'who's house' thing otherwise I'll be forced, or
perhaps even delighted - to post the link to the YouTube vid :) Note
to the list, Brian likes cider. Just be
nm I am able to reproduce it.
/b
On Jul 4, 2008, at 1:24 PM, Alex Kinch wrote:
Don't you start the 'who's house' thing otherwise I'll be forced, or
perhaps even delighted - to post the link to the YouTube vid :) Note
to the list, Brian likes cider. Just be careful how much you feed
him...
Doing so now..
OK still the same result. Please don't make me do another backtrace,
my cut and paste muscles in my fingers are hurting :p
Alex
On 4 Jul 2008, at 19:48, Brian West wrote:
Can you try a 'make current' to ensure we have no code skew.
/b
On Jul 4, 2008, at 1:24 PM, Alex
I reverted the change to mod_cdr_csv.c till MikeJ can look at it closer.
/b
On Jul 4, 2008, at 1:59 PM, Alex Kinch wrote:
Doing so now..
OK still the same result. Please don't make me do another backtrace,
my cut and paste muscles in my fingers are hurting :p
Alex
On 4 Jul 2008, at
Thanks Brian. Have just done a make current, all looks ok now.
Cheers again :)
Alex
On 4 Jul 2008, at 20:07, Brian West wrote:
I reverted the change to mod_cdr_csv.c till MikeJ can look at it
closer.
/b
On Jul 4, 2008, at 1:59 PM, Alex Kinch wrote:
Doing so now..
OK still the same
60 matches
Mail list logo
