Lak,
Okay, it stood out right away: FS is trying u-law but Asterisk is trying
A-law. I'm not sure where the codec for openzap gets selected but you can
try modifying this line in vars.xml:
X-PRE-PROCESS cmd=set data=outbound_codec_prefs=PCMU,PCMA,GSM/
Try putting PCMA first. Also, I've never
lakshmanan ganapathy lakindi...@gmail.com said:
I was struggling to originate a call from the CLI.
originate openzap/1/1/9952248266 openzap/1/1/9952248266 says No route.
Aborting.
The syntax is incorrect.
originate openzap/1/1/9952248266 extension
For example,
openzap/1/1/9952248266 1234
But that setup is not there right now. It was an year back they used that.
I'll try to make those setup and send you the log. I think it may take some
2 days time, and I'm not very familiar with asterisk.
In the mean time, I request you to kindly go-through freeswitch debug log.
You may still get
Hi. I made the setup quickly with one of my colleague, and here is the debug
log given by asterisk
Steps done by me :
+ Call Made from 04443902743 to 04439114600
+ When call lands to 04439114600, I just route it to 09176454982.
*CLI
*CLI
*CLI pri debug span 1
Enabled debugging on
Ya ok. Here is the required stuff
Configuration: (PRI span)
configuration name=openzap.conf description=OpenZAP Configuration
settings
param name=debug value=7/
/settings
pri_spans
span id=1 name=PRI_1
param name=q921loglevel value=alert/
param name=q931loglevel value=alert/
param name=mode
Lak,
Okay I will need a little bit of time to dig into the IE's and what they
contain. In the meantime can you tell me who the carrier is? I'd like to
find out if they have some specific requirements. The fact that it doesn't
work with libpri surprises me because that would mean that Asterisk
Hi,
I've tried with the following dialplan(After making the changes that are
recommended). But still I got INVALID_IE_CONTENTS error.
Another thing is, if I use prispan configuration, I'm able to make outgoing
calls.
But if I use the libpri span configuration I'm not able to make outgoing
calls,
Okay, please go to pastebin.freeswitch.org and paste your openzap.conf.xml
file. Also, paste the ENTIRE debug log from a call from start to finish.
Telling us that you see INVALID_IE_CONTENTS doesn't help if we don't know
what the information element contains. Finally, turn on PRI debugging and
Thanks all u guys. It got worked when I replaced with the following
configuration and the incoming has no problem with that.
[span zt PRI_1]
trunk_type = e1
b-channel = 1-15
d-channel = 16
b-channel = 17-31
But still I'm facing problem with the outgoing call. It says
INVALID_IE_CONTENTS.
What
lakshmanan ganapathy lakindi...@gmail.com said:
But still I'm facing problem with the outgoing call. It says
INVALID_IE_CONTENTS.
What might be the issue? Even I tried the following dialplan to call by
using bridge.
extension name=outgoing-fxo
condition
Hi I tried with the following openzap.conf
[span zt PRI_1]
trunk_type = e1
b-channel = 1:1-15,17-31
d-channel = 1:16
openzap.conf.xml
configuration name=openzap.conf description=OpenZAP Configuration
settings
param name=debug value=7/
/settings
libpri_spans
On Thu, Oct 8, 2009 at 5:41 AM, lakshmanan ganapathy
lakindi...@gmail.comwrote:
Hi I tried with the following openzap.conf
[span zt PRI_1]
trunk_type = e1
b-channel = 1:1-15,17-31
d-channel = 1:16
This does not look like a healthy config to me. You are using
span:channels notation in
On Thu, Oct 8, 2009 at 8:02 AM, Moises Silva moises.si...@gmail.com wrote:
On Thu, Oct 8, 2009 at 5:41 AM, lakshmanan ganapathy lakindi...@gmail.com
wrote:
Hi I tried with the following openzap.conf
[span zt PRI_1]
trunk_type = e1
b-channel = 1:1-15,17-31
d-channel = 1:16
This does
Hi,
Again I was struck in a problem, Here is the scenario.
On incomming call, I just call an event outboud socket. But what happens is,
for the first 15 call, it is working fine. But from the 16th call to 30th
call, it says the below error.
2009-10-07 15:07:48.201846 [WARNING] ozmod_libpri.c:761
lakshmanan ganapathy lakindi...@gmail.com said:
On incomming call, I just call an event outboud socket. But what
happens is,
for the first 15 call, it is working fine. But from the 16th call to 30th
call, it says the below error.
What is displayed with
ztcfg -vv
What is displayed with
[debian :~]# ztcfg -vvv
Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
==
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear
On Wed, Oct 7, 2009 at 3:34 AM, lakshmanan ganapathy
lakindi...@gmail.comwrote:
Hi,
Again I was struck in a problem, Here is the scenario.
On incomming call, I just call an event outboud socket. But what happens
is, for the first 15 call, it is working fine. But from the 16th call to
30th
17 matches
Mail list logo