On Fri, Jun 06, 2003 at 10:34:13PM -0500, Corey wrote:
> Have people pull 2 days worth of programming.. 48 hours but have the
> epg_xmltv.py just process the first 36 hours. Also maybe you can put in
> some coding that will talk to DirectTV receivers and Digital Cable boxes
> themselves. I know o
A solution maybe,
Have people pull 2 days worth of programming.. 48 hours but have the
epg_xmltv.py just process the first 36 hours. Also maybe you can put in
some coding that will talk to DirectTV receivers and Digital Cable boxes
themselves. I know of a few windows programs that already can do
I've added a FAQ item for this common question, it's here:
http://freevo.sourceforge.net/cgi-bin/moin.cgi/FrequentlyAskedQuestions#head-c2dc4eda68a16d6e29014564dbbae44905f757d3
Aubin
On Fri, Jun 06, 2003 at 07:04:54PM -0800, Manendra wrote:
> Help me out here...
> While watching live TV, the audi
Help me out here...
While watching live TV, the audio is horribly out of sync with the
video. But only while watching live TV- DVDs and mpegs are fine. I have
the line out on my Hauppauge WINTV GO ran to the input of a SoundBlaster
Live- but even when listening to the audio straight from the tun
The lack of stop times has an explanation, even with
tv_sort; tv_sort figures out the stop times for shows by looking and
the start time for the next show on the same channel, unfortunately,
since your listings are for a set time period - any time period - the
last set of shows have no end time, b
I had Freevo working fairly well earlier today. The menu was working in
full screen, and when selecting a movie of choice, Mplayer would start
up in full screen mode and work well...Then I changed video cards a
couple of times to test different ones. NOW Mplayer, no matter what card
I use, flashes
True but i started from scratch with first setting to 800x600.
Then i started up freevo and sshed to the box and also on base of
try-and-error with -left then -upper down right etc etc it's almost ok now
but what i've seen is that i needed to use steps of 4 (of 6 not sure
anymore) so -left 4 was o
"Robert Wohleb" wrote:
> Hi,
Hi
> Does the gentoo package use the CVS version of Freevo ot the latest
> release?
The latest release. Installing with gentoo should give you pre4.
> Is the origional author of the package still maintaining it?
Yes, if pre5 comes out, the ebuilds will be updated.
"Youri van Gorselen" wrote:
>>If someone has such a testscreen program for fbset, send it. Right
>>now, fbset is some sort of try and error.
>
> Well i can't code it but maybe i can create a testscreen in gimp with the
> right resolutions and colors.
The problem is fbset itself. Changing left has
I've been having problems with XMLTV also. I am running the Gentoo package (which ever
version that is). Even after running tv_sort, the file contains entries without stop
times. When I get home tonight I'll be checking the source for the fix mentioned.
~Rob
-Original Message-
From: Rob
Aubin Paul wrote:
On Fri, Jun 06, 2003 at 07:56:17PM +, Jack Trades wrote:
XMLTV, reading cached file (/var/cache/freevo/TV.xml-0.pickled)
sh: /lib/ld-linux.so.2: version `GLIBC_2.1.1' not found (required by
./runtime/dll/libc.so.6)
sh: /lib/ld-linux.so.2: version `GLIBC_2.2.3' not found (req
On Fri, Jun 06, 2003 at 07:56:17PM +, Jack Trades wrote:
> XMLTV, reading cached file (/var/cache/freevo/TV.xml-0.pickled)
> sh: /lib/ld-linux.so.2: version `GLIBC_2.1.1' not found (required by
> ./runtime/dll/libc.so.6)
> sh: /lib/ld-linux.so.2: version `GLIBC_2.2.3' not found (required by
>
I ran it. This was the first error:
XMLTV, reading cached file (/var/cache/freevo/TV.xml-0.pickled)
sh: /lib/ld-linux.so.2: version `GLIBC_2.1.1' not found (required by
./runtime/dll/libc.so.6)
sh: /lib/ld-linux.so.2: version `GLIBC_2.2.3' not found (required by
./runtime/dll/libc.so.6)
sh: /li
Can you try running the epg_xmltv manually to see what it says now?
something like this:
./freevo execute src/tv/epg_xmltv.py
and look at the output for problems.
Aubin
On Fri, Jun 06, 2003 at 06:46:49PM +, Jack Trades wrote:
> I just upgraded everything (apps, runtime, freevo). Now it do
When I run Freevo and try to view the tvgide portion I get a corrupt
message..
In the log I found this
Traceback (most recent call last):
File "/src/tv/epg_xmltv.py", line 143, in get_guide
File "/src/tv/epg_xmltv.py", line 234, in load_guide
File "/src/tv/xmltv.py", line 329, in read_progr
Hi,
Does the gentoo package use the CVS version of Freevo ot the latest release? Is the
origional author of the package still maintaining it?
~Rob
---
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger
On Thu, 5 Jun 2003, [iso-8859-1] Jortan H wrote:
> Hi,
>
> I really like this project, you've done a great job!
>
> I'm wondering if it is possible to use an NVidia
> Geforce graphics card in frame buffer mode (without X)
> with TV-out. As far as I have read I understand that I
> have to use X t
I just upgraded everything (apps, runtime, freevo). Now it doesnt give me
an error - it just doesnt say anything at all. Do I need to change
something else now that I have the new version?
Feel like I'm chasing my tail here... :)
N
From: "Jack Trades" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PRO
Does blindness count as a reason? Ok, so I'm not blind - but I somehow
missed all the links to the newer versions. I downloaded them (runtime,
apps, and freevo) and will install them shortly - however, that
anal-retentive, obsesive-compulsive part of me needs to fix/figure out a
problem before
On Fri, Jun 06, 2003 at 03:14:16PM +, Jack Trades wrote:
> try:
> prog.stop = timestr2secs_utc(p['stop'])
> except:
> prog.stop = timestr2secs_utc(p['start'][0:8] + '235900' +
> p['start'][14:18])
>except EPG_TIME_EXC:
>continue
>guid
Hi again,
Just wanted to mention a couple of mods I made to the 2699R make it work for
me.
- The 55W ATX power supply is a bit weak at startup. The power-block
doesn't deliver enough power when you hit the POWER button. I had to add an
4700uF/16V reservoir electrolythic capacitor in parallell wi
Along with that...
I edited out the last line
except EPG_TIME_EXC:
continue
And Freevo started up...but I still get the "TV Guide corrupted" error when
I try and access the TV listings..
:\
From: Aubin Paul <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTE
Paul -
this is what I had before:
try:
prog.start = timestr2secs_utc(p['start'])
prog.stop = timestr2secs_utc(p['stop'])
except EPG_TIME_EXC:
continue
guide.AddProgram(prog)
So I did as you suggested and replaced it, so it looked like this:
Ahh... that's your problem. I'll explain and attach a fix.
What happened was the North American provider (zap) stopped putting
stop dates in the television listings. xmltv used to use those to
figure out when shows ended, it only seems to be a problem on the last
day of listings, because tv_sort f
tor 2003-06-05 klockan 22.08 skrev Magnus Einarsson:
> Take a look at http://www.mini-itx.com/store they have several really
> nice ones i like this one http://www.hushtechnologies.net/
Yeah, it's gorgeous, but as I'm building my own I'll probably settle for
a cubid case. They seem decent enoug
tor 2003-06-05 klockan 22.32 skrev Tommy Killander:
More Swedes to the rescue,
> This is The One you Want (I suspect) - http://www.hushtechnologies.net/ .
> Click-and-Drool...
Yes, it's truly sweet amd I wish I could afford it too.
> Myself, I couldn't afford it :-( I had to go for the Morex Cu
Did you try just setting the path to an external mplayer in
freevo.conf? I'm presuming you're able to build it in general, just
not get it to work with Freevo;
If that's the case, put it in /usr/bin or /usr/local/bin and edit the
line in freevo.conf that specifies the location.
On Thu, Jun 05,
I can't seem to compile a version of mplayer that works with freevo. I
think it is because of some glibc incompatability that I don't want to
mess with, woudl someone be willing to compile an mplayer with the
mythtv patch, I really need an mplayer that is able to play mythtv files.
thanks
-Gabe
Bo,
This is The One you Want (I suspect) - http://www.hushtechnologies.net/ .
Click-and-Drool...
Myself, I couldn't afford it :-( I had to go for the Morex Cubid 2699R,
since I also wanted to buy everything from Dustin AB.
See also:
Cubid - http://www.casetronic.com/PC_cases.htm#miniitx
Ice Cub
Hi!
Take a look at http://www.mini-itx.com/store they have several really
nice ones i like this one http://www.hushtechnologies.net/
/Magnus
Bo Rosén wrote:
Hi,
I know this is somewhat OT, but I plan to build a htpc in a few months
based on the eden m1 board.
Any good suggestions for a ca
I added a link on the site (in the hardware section) and I'm going to
add my system now...
I was just thinking about how it would be useful to have something
like this, but didn't feel inclined to writing it... :)
Aubin
On Thu, Jun 05, 2003 at 02:07:02PM -0300, Rob Shortt wrote:
> Aubin Paul wro
Hi,
I know this is somewhat OT, but I plan to build a htpc in a few months
based on the eden m1 board.
Any good suggestions for a case that won't be embarrasing beside my
stereo? From someone who ships to Sweden?
The closest thing I've found would be something from Morex, except I
think
freevo: 1.3.1-2
freevo-apps: 1.3.1-1
freevo-runtime: 4-1
so the patch I need is..?
BTW: I did try tv_grab_na > /tmp/TV.xml and this didnt work eitehr. I was
thinking (hoping) that maybe something was messed up with the script as its
written in the docs - but to no avail. Although it is MUCH b
Title: freevo and Myth on same box?
Anyone installed freevo and MythTV on the same box? Any issues?
Keith
Aubin Paul wrote:
I can do that, though would this link be better:
http://pvrhw.goldfish.org/tiki-pvrhwdb.php?find=freevo&search=find&sort_mode=lmodified_desc
Just to confine the results to ones relevant for us?
Wonderful idea! Now, everyone go add your setups. :)
-Rob
--
I can do that, though would this link be better:
http://pvrhw.goldfish.org/tiki-pvrhwdb.php?find=freevo&search=find&sort_mode=lmodified_desc
Just to confine the results to ones relevant for us?
Aubin
On Thu, Jun 05, 2003 at 05:13:35PM +0100, John Molohan wrote:
> Hello all,
>
> Just came acro
Hello all,
Just came across this site, it contains a database of sorts
regarding PVR hardware people are using for their Freevo,
Myth boxes. Thought it might be a good idea to link to this
from the web site or wiki seems how we often get people
asking the list about recommended hardware.
htt
"Youri van Gorselen" wrote:
> Hi,
>
> I'm unable to get my sound working in the pre4 release.
>
> I use -ac mad -ac hwac3 and -ao alsa9 on my sblive 5.1 with digital out.
>I don't have a sblive, but you shouldn't use '-ac hwac3', because then
>you can only play ac3. Use '-ac hwac3,'
True sorry i
[EMAIL PROTECTED] said:
> (I have the VESA framebuffer working fine)
btw, i boot with vga=0x315, if that helps anything. other resolutions
probably work.
> First question: when I compile MPlayer, I don't see
> 'vidix' os one fo the output options. I see 'xvidix',
> but no 'vidix'.
I don't have
39 matches
Mail list logo