thanks!!! I will try it tonight!
On Friday 20 April 2007 12:40, Jim Duda wrote:
> This is the Xorg conf data I use for my FX5200 setup.
>
> For my Sharp Aquos 42" LCD monitor, the key thing I needed was
> NoMaxPClkCheck.
>
> You mileage may vary :-)
>
> The NVIDIA binary drivers have a very
This is the Xorg conf data I use for my FX5200 setup.
For my Sharp Aquos 42" LCD monitor, the key thing I needed was NoMaxPClkCheck.
You mileage may vary :-)
The NVIDIA binary drivers have a very detailed explaination of the Xorg setup.
I hope this helps.
Section "Monitor"
### Comment all Ho
I'm using an NVIDIA FX-5200 AGP with a heatsink (fanless).
This card has a DVI out. I drive my Sharp 42" 1080p monitor using a DVI to
HDMI cable.
It took me a while to get the correct X configuration to work, but I found the
proper one for 1080p.
I'm using the NVIDIA binary driver from NVIDIA.
I
On 2007-04-20 11:24, Christian Lyra wrote:
> My TV just arrived, and I´m wondering if any of you has a xorg.conf
> with nvidia card and 1920x1080... is there something special to do, or
> just put the 1920x1080 and hope that works?
I haven't done it myself, but assuming you're using DVI, the advic
Hi there,
My TV just arrived, and I´m wondering if any of you has a xorg.conf
with nvidia card and 1920x1080... is there something special to do, or
just put the 1920x1080 and hope that works?
--
Christian Lyra
POP-PR - RNP
http://lyra.soueu.com.br
Thus spake the master programme
> Great!
>
> Duncan, can you tell me if this is in SVN?
Yes, should be.
Duncan
> -Oorspronkelijk bericht-
> Van: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Namens Duncan Webb
> Verzonden: 20 April 2007 13:14
> Aan: freevo-users@lists.sourceforge.net
> Onderwerp: Re: [Freevo-users] Lir
Great!
Duncan, can you tell me if this is in SVN?
Greets,
Frank
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Duncan Webb
Verzonden: 20 April 2007 13:14
Aan: freevo-users@lists.sourceforge.net
Onderwerp: Re: [Freevo-users] Lirc key mapping
> On Fri,
> On Fri, 2007-04-20 at 12:24 +0200, Antispam wrote:
>> Hello all,
>>
>> Can some one tell me howto map the a-key in xine to a button in my
>> remote.
>
> http://www.lirc.org/html/irxevent.html
>
> That should be useful.
Also see
https://sourceforge.net/tracker/?func=detail&atid=446898&aid=1683699
On Fri, 2007-04-20 at 12:24 +0200, Antispam wrote:
> Hello all,
>
> Can some one tell me howto map the a-key in xine to a button in my remote.
http://www.lirc.org/html/irxevent.html
That should be useful.
K,
-
This SF.ne
Hello list,
I'm having the following (not really a freevo) problem.
When I start X, the x-position is shifted 10 pixels to the right.
I'm using FC5, nvidia drivers. My box is connected thu the TV-out of a ASUS
V7100 and a regular TV.
Can someone point me to a possible solution?
Thanks,
Frank
Hello all,
Can some one tell me howto map the a-key in xine to a button in my remote.
Here are my conf's:
lircrc:
==
begin
prog = freevo
button = BLANK
config = DISPLAY
end
begin
prog=xine
button=BLANK
config=ToggleAspectRatio
end
local_conf.py:
===
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Beat Brunner wrote:
> Hi List
>
> I'm trying to install freevo on Fedora 6 box. The installation fails due to a
> missing dependency of the python-kaa-imlib2 module even though the library is
> installed.
>
> Hopefully someone can help getting Fre
12 matches
Mail list logo
