Hi Tommy,
> (http://www.viaarena.com/?PageID=296#KPLE) yet ?
> Check out the the item marked New (Mandrake 9.0),
Looks like those are for the EPIA-M ?
> Maybe you will have to use them in order to get the
> "Device" parameters to work.
Actually, it seems that my problem was with the
version of
parameters to
work.
/TK
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Alan
> Murrell
> Sent: den 2 juni 2003 16:29
> To: [EMAIL PROTECTED]
> Subject: RE: [Freevo-users] X11 and TV Out
>
>
> Hi Tommy,
>
> >
Okay, so I'm making a little progress. I am getting
the "ModeLines"; in fact, everything seems to be
loading, except my screen is still blank (but a sort
of darker blank, if you know what I mean?)
Running 'ps -aux' confirms that Freevo is running:
root 1215 0.0 0.9 2380 1124 vc/1 S
Hello Tommy,
> I think that your problem with the TV output might
> be related to vertical and horisontal sync
> frequencies.
Sorry, I know this is not so much a Freevo issue as an
X issue, but I thought I would post here to see if any
other ideas popped up.
I was able to get a litle further, b
Hi Tommy,
> will be of little use since you are using an EPIA
> board, right ?
Correct.
> You should probably use KLE133 drivers for EPIA
Hrm, Mandrake 9.1 detected them as "Trident Cyberblade
(generic)", which runs well on my monitor. Perhaps I
will give that a try first, but with the ModeLin
4 1096
#Refresh Rate 85Hz
ModeLine "1280x768" 118.5 1280 1368 1504 1728 768 769 772 807
ModeLine "1440x1050" 184.5 1440 1544 1704 1968 1050 1051 1054 1103
ModeLine "848x480" 47.4 848 888 976 1104 480 481 484 505
EndSection
Section "Device"
# no known options
Identifier "
Hello Joakim,
> This is how the XF86Config on a 10k EpiaM looks for
> me.
[SNIP]
Looks like this is from Freevix, correct?
Unfortunately, that didn;t help; same issue. I
actually took another XF86Config file from an earlier
version of Freevix, which did run for me before, but
unfortunately doe
> Hello,
>
> > What you could check is the jumper settings for the
> > S-Video port.
>
> Sorry, I should have clarifed: I can see the BIOS
> output and bootup messages on the TV screen when the
> RCA Video Out is plugged in. It is when I do "startx"
> that the TV screen then goes blank (i.e., n
Hello,
> What you could check is the jumper settings for the
> S-Video port.
Sorry, I should have clarifed: I can see the BIOS
output and bootup messages on the TV screen when the
RCA Video Out is plugged in. It is when I do "startx"
that the TV screen then goes blank (i.e., no X
Windows), thoug
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Alan
> Murrell
> Sent: den 1 juni 2003 08:49
> To: Freevo Users List
> Subject: [Freevo-users] X11 and TV Out
>
>
> Hello,
>
> I am playing with using an EPIA board (
> I am playing with using an EPIA board (800MHz), which
> has built in TV out, etc.
>
> I have Freevo setup to run under X11, and it works
> great when the outputis to a monitor. However, when I
> plug the composite TV cable from the TV to the TV Out
> on the board, and restart, all I get is a bl
Hello,
I am playing with using an EPIA board (800MHz), which
has built in TV out, etc.
I have Freevo setup to run under X11, and it works
great when the outputis to a monitor. However, when I
plug the composite TV cable from the TV to the TV Out
on the board, and restart, all I get is a blank sc
12 matches
Mail list logo