Hi all,
I recently bought a G3 Lombard 333 MHz for sofa surfing etc; it was
originally equipped with 128 MB RAM (2x64) which I exchanged by 2x256
MB/PC133/CL-3 modules.
Unfortunately, the Lombard only recognises each of the modules as 128
MB.
I would have expected that, if the modules are
Hi Thomas,
You wrote:
Is there any trick to force the PB to recognise the full capacity?
Yes, Get PC66 modules. Some PC100 modules will also be recognized and
utilized properly. I don't know the precise technical reason for
this, but Lombards are known to be very finicky about memory
It depends on the memory controller. The WS, and probably the Lombard
too, can only address module with 128 Mbits chips. So if the chip has
8 modules (regardless their density): 128 mbits x 8 = = 1024 Mbits =
128 MByte
In my wallstreet I have a 512 MByte module that is seen as 256 as it
has
Hi all,
I recently bought a G3 Lombard 333 MHz for sofa surfing etc; it was
originally equipped with 128 MB RAM (2x64) which I exchanged by 2x256
MB/PC133/CL-3 modules.
Unfortunately, the Lombard only recognises each of the modules as 128
MB.
I would have expected that, if the modules
hola a todos:
i want to know if this is possible: can i install tiger in dvd in a
lombard using an external dvd drive? what would i need to do it? has
anybody had success in installing tiger in lombard other that
switching the hd with a pismo or similar? i have a 5 pack of tiger
and do not
I have a 300mhz wall street that has the DVD card and player. plenty of
ram and running 9.2.1. Why after 10:00 mins or so of running a movie it
will start to stutter and not play correctly. Is it something with the
player, the card, or the software and how to correct it. I usually run
this
I have a 300mhz wall street that has the DVD card and player. plenty
of ram and running 9.2.1. Why after 10:00 mins or so of running a
movie it will start to stutter and not play correctly. Is it
something with the player, the card, or the software and how to
correct it. I usually run this
Has anyone noticed a gray frame that sometimes appears peripherally
around the screen=3F It's translucent gray border about a half inch
wide
and either on all four edges or on the sides and top. (It's gone
right
now, so I don't exactly remember if it's at the bottom, where my dock
happens to
