Drew. I got the machine running again. The case was that I thougt that the
arrow up key was the option key. After being puzzled for a long time the
switch went on. That made a big difference. And the sound didn't sound
because the soundlevel was at 0.
Thank you so much. You are my hero! What a kno
Thank you Drew. I tried all your hints but Pismo doesn't make a start up
sound. It goes straight to a grey screen with a small folder in the middle
wich switches to a system icon and a question mark.
What to do?
- Original Message -
From: "Andrew Kershaw" <[EMAIL PROTECTED]>
To: "G-Books"
g you should probably check is that the cable to the HD is
> properly seated on both ends. I did a very bad thing when I installed
> my 40GB Hitachi into my Lombard and forgot to check the end connected
> to the logic board. Suffice it to say, I had fun reformatting and
> reinstalling
i attached a new fire wire Toshiba 30 GB hard disk to my Pismo 400 by
placing it in a case firewire case from SITECOM. art.no CN-600.
It didn't show up at the desk top. After taking the firewire plug in and
out many times after eachother, it showed up. I formatted it and installed
system 9. Fine.
