Obi-Wan wrote:
It's not your Pismo. There is no incompatibility with a drive in an
enclosure through a FW bridge. Just plug the drive in to the AC. Plug the
FW cable into the Pismo, and open Drive setup and format the drive. IT
should work fine. The Jumper in all FW drives should be set
On 1/16/03 9:43 AM, Bruce Johnson [EMAIL PROTECTED] Spew into
the Cybertrough:
I had a problem with an external FW drive in a Rev1 BW; it wouldn't
work until I upgraded the BW to OSX (which kinda sucked rocks, since
the reason I was attaching it was to back the system up before upgrading
it to
Just purchased a Maxtor 80GB/7200rpm external drive to hook up via Firewire
to my Pismo (OS 9.2). Tried different start up combinations but I can't see
an icon any where... the drive sounds great. Is the rpm rate too much for
this PB?
Wah! I need it!
ez
--
G-Books is sponsored by
Just purchased a Maxtor 80GB/7200rpm external drive to hook up via
Firewire
to my Pismo (OS 9.2). Tried different start up combinations but I
can't see
an icon any where... the drive sounds great. Is the rpm rate too much
for
this PB?
Wah! I need it!
ez
Is it a fully enclosed
on 1/15/03 6:35 AM, Luca Rescigno at [EMAIL PROTECTED] wrote:
Is it a fully enclosed external drive, or is it a drive you bought
yourself plus an enclosure?
The invoice describes it as a compact external case WITH the Maxtor HDD.
I don't know how to change the jumper setting... The mini
The invoice describes it as a compact external case WITH the Maxtor
HDD.
I don't know how to change the jumper setting... The mini booklet that
came
with it just assumed that it would appear on a mac no problem.
Thanks Luca.
Hmm, I'm not sure if I am enough of an authority on this to be
on 1/15/03 7:11 AM, Luca Rescigno at [EMAIL PROTECTED] wrote:
The invoice describes it as a compact external case WITH the Maxtor
HDD.
I don't know how to change the jumper setting... The mini booklet that
came
with it just assumed that it would appear on a mac no problem.
Thanks Luca.
Thanks very much- I can work with that info...
So, it's not some kind of pismo incompatibility issue, or rpm speed
issue
then?
Ed
I don't know if it's incompatible... it's possible but it doesn't seem
likely. However, I am sure it's not too high RPMs for your Pismo,
that's not an
on 1/15/03 7:21 AM, Luca Rescigno at [EMAIL PROTECTED] wrote:
Thanks very much- I can work with that info...
So, it's not some kind of pismo incompatibility issue, or rpm speed
issue
then?
Ed
I don't know if it's incompatible... it's possible but it doesn't seem
likely. However, I
on 1/15/03 8:50 AM, Joe Ellis at [EMAIL PROTECTED] wrote:
- Original Message -
From: Ed Zelinsky [EMAIL PROTECTED]
To: G-Books [EMAIL PROTECTED]
Sent: Wednesday, January 15, 2003 8:29 AM
Subject: Re: External drive not showing up on Pismo
on 1/15/03 7:21 AM, Luca Rescigno
10 matches
Mail list logo
