Yeah the WD200BB is sufficient. That 75DEA0 match is nice but not required.
I wanna say that's firmware rev or board rev. Its probably also possible to
get a WD200JB board to work, but I wouldn't try it. JB is their special
edition series with extra cache, but since this is a recovery operation
Hi!
At http://www.feyrer.de/g4u/#filesystems it says :
5.1 Supported filesystems
One of the questions arising a lot is what filesystems does g4u support. The
answer is: all of them. g4u reads the disk bit by bit, starting from byte #0
to the end. It includes any MBR, boot record, partition
Hi!
At http://www.feyrer.de/g4u/#support the link to the g4u-help list archive
http://sourceforge.net/mailarchive/forum.php?forum_id=43203
http://sourceforge.net/mailarchive/forum.php?forum_id=43203
leads to an error page.
Regards,
David
Hello David and thanks for posting to the forum. I have to take issue with
your ³bogus info². I work for a specialized industrial PC OEM, where we
build locked down computers that utilize windows XP professional, and
windows XP embedded. So lets go through the numbers here:
My problem with your
Good find dave. I had meant to post about that a while ago. The alternative
though does work, which hubert has posted:
http://www.mail-archive.com/g4u-help@feyrer.de/
Matt Smollinger
Application Engineer for Convergence Tech.
AdvancedAV ATG
From: David Balazic [EMAIL PROTECTED]
Date: Sun, 23
The correct source forge archive link is
http://sourceforge.net/mailarchive/forum.php?forum_name=g4u-help
From: Matt Smollinger [mailto:[EMAIL PROTECTED]
Sent: Sun 23-Sep-07 16:54
To: David Balazic; g4u-help@feyrer.de
Subject: Re: [g4u-help] Bad link on home
On Sun, 23 Sep 2007, David Balazic wrote:
The correct source forge archive link is
http://sourceforge.net/mailarchive/forum.php?forum_name=g4u-help
I've fixed both archive links (for the announce and help lists).
Thanks!
- Hubert
