gEDA-user: footprint

Hi, I'm now developing some hardware and I have some problems with footprints. I'm working with smd 74hcxxx chips witch IMHO have SOXX footprints. Then when I add 7400 into schematics and set footprint to SO14 it runs correct. SO32 works well too. But when I try to add 74373 ( witch have 20 pads )

Re: gEDA-user: using buses in gschem

> Is there any documentation/examples for using buses? > > I already read gschem documentation but there is very few > things about buses. There is written that buses are > like nets and something like buses are new and not finished yet. Allready solved by a little hack: I add bus and connect pin

Re: gEDA-user: Installation problem wxGtk

On Wed, 2 Aug 2006 10:10:08 -0400, "Patrick Doyle" <[EMAIL PROTECTED]> said: > On 8/2/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hi everyone! > > I've downloaded the ISO from gEDA official site and started installer > > --log from CD-ROM but it says I need wxGtk. > > I've tried > > rpm -q

gEDA-user: using buses in gschem

Is there any documentation/examples for using buses? I already read gschem documentation but there is very few things about buses. There is written that buses are like nets and something like buses are new and not finished yet. -- watashi |v|[EMAIL PROTECTED] Cyril Hrubis [EMAIL PROTECTED] --

Re: gEDA-user: TQFP package problem

> > I have problem with gsch2pcb and > > /usr/share/gEDA/sym/micro/ATmega128-3.sym. > > I added this one to .sch file run gsch2pcb on it and get this result: > > > > U1: can't find PCB element for footprint TQFP64 (value=unknown) > > So device U1 will not be in the layout. > > > > Other packages

Re: gEDA-user: footprints -- novice`s problems

> >> So far for all my home made boards I used PCB's ps output printed on > >> laserjet on special paper which then I put on the board and use an > >> iron to transfer the paint from the paper to the board. I used 2 > >> different laser printers, an Infotec and a HP and with both I had 1:1. Of > >>

gEDA-user: TQFP package problem

I have problem with gsch2pcb and /usr/share/gEDA/sym/micro/ATmega128-3.sym. I added this one to .sch file run gsch2pcb on it and get this result: U1: can't find PCB element for footprint TQFP64 (value=unknown) So device U1 will not be in the layout. Other packages like DIP or SO are working but w