Re: gEDA-user: Creating a polygon without a pruned center

2011-02-03 Thread Kovacs Levente
On Wed, 02 Feb 2011 13:13:16 -0500 David Carr d...@dcarr.org wrote: Hi all, Forgive me if this has been asked before, but my searching didn't uncover a solution: Here's an image of a board with a component and solder side ground planes: http://oscar.dcarr.org/tmp/board.png I'd like

Re: gEDA-user: Creating a polygon without a pruned center

2011-02-03 Thread Kai-Martin Knaak
Kovacs Levente wrote: select the polygon, issue the command Morphpoly(selected) Should be Morphpolygon(selected) This action replaces the original polygon with independent polygons that are traced along the margins of the islands the original polygon was divided into. According to the

gEDA-user: Creating a polygon without a pruned center

2011-02-02 Thread David Carr
Hi all, Forgive me if this has been asked before, but my searching didn't uncover a solution: Here's an image of a board with a component and solder side ground planes: http://oscar.dcarr.org/tmp/board.png I'd like for the top ground plane (tan) to not be pruned in the center so that I can

Re: gEDA-user: Creating a polygon without a pruned center

2011-02-02 Thread Kai-Martin Knaak
David Carr wrote: I'd like for the top ground plane (tan) to not be pruned in the center so that I can connect the dangling pieces to the solder side ground plane. Is there any way to do this? If the fullpoly flag is set for a polygon, the cut off areas are not removed. Check the option