Re: gEDA-user: Just another minor pcb bug

2008-11-23 Thread Stefan Salewski
Am Samstag, den 22.11.2008, 20:42 -0500 schrieb DJ Delorie: > > If Auto enforce DRC clearance is on, lines (traces) starting from a > > pad always snap to one of the pad endpoints. > > This appears to be completely intentional, although I don't know the > reason behind it. > So I call it an "int

Re: gEDA-user: Just another minor pcb bug

2008-11-22 Thread DJ Delorie
> If Auto enforce DRC clearance is on, lines (traces) starting from a > pad always snap to one of the pad endpoints. This appears to be completely intentional, although I don't know the reason behind it. if (TEST_FLAG (AUTODRCFLAG, PCB) && Settings.Mode == LINE_MODE) {

Re: gEDA-user: Just another minor pcb bug

2008-11-22 Thread Stefan Salewski
Am Samstag, den 22.11.2008, 16:19 -0800 schrieb Ben Jackson: > On Sun, Nov 23, 2008 at 12:33:33AM +0100, Stefan Salewski wrote: > > > > SHIFT makes no difference for this bug -- "Crosshair snaps to pins and > > pads" is off, "Auto enforce DRC clearance" is on. Snaps to pad > > endpoints. If I swit

Re: gEDA-user: Just another minor pcb bug

2008-11-22 Thread Ben Jackson
On Sun, Nov 23, 2008 at 12:33:33AM +0100, Stefan Salewski wrote: > > SHIFT makes no difference for this bug -- "Crosshair snaps to pins and > pads" is off, "Auto enforce DRC clearance" is on. Snaps to pad > endpoints. If I switch "Auto enforce DRC clearance" off snap to grid > points works fine as

Re: gEDA-user: Just another minor pcb bug

2008-11-22 Thread Stefan Salewski
Am Samstag, den 22.11.2008, 23:22 + schrieb Peter Clifton: > On Sat, 2008-11-22 at 21:52 +0100, Stefan Salewski wrote: > > pcb 20080202 (GTK) > > > > If Auto enforce DRC clearance is on, lines (traces) starting from a pad > > always snap to one of the pad endpoints. It is impossible to start t

Re: gEDA-user: Just another minor pcb bug

2008-11-22 Thread Peter Clifton
On Sat, 2008-11-22 at 21:52 +0100, Stefan Salewski wrote: > pcb 20080202 (GTK) > > If Auto enforce DRC clearance is on, lines (traces) starting from a pad > always snap to one of the pad endpoints. It is impossible to start the > line from an arbitrary grid point over the pad. Even if you hold do

gEDA-user: Just another minor pcb bug

2008-11-22 Thread Stefan Salewski
pcb 20080202 (GTK) If Auto enforce DRC clearance is on, lines (traces) starting from a pad always snap to one of the pad endpoints. It is impossible to start the line from an arbitrary grid point over the pad. I think this will be a known bug to developers. If not: At http://www.ssalewski.de/tmp