On Dec 23, 2009, at 1:06 AM, Dave N6NZ wrote:
Back in the days when I was a CPU designer, we did backplane boards
much larger than that. I once spec'ed out an impedance controlled
(IOW: very thick) PCB that was 42 x 6. Yes, everybody thought I
was nuts. I probably was/am, but let me
I'm trying to find a shop that will make 29 long boards. They are
simple 1/16 two layer boards and will have card edge connectors.
Is there a known vendor for this type of work?
Thank you, Phil Taylor
___
geda-user mailing list
I suspect you'll have to skip the prototype services and go straight
to customer support on that kind of board, at which point you might as
well just start emailing fabs and asking.
That's a really big board, though.
___
geda-user mailing list
why so long? if you don't mind me asking...
On Tue, Dec 22, 2009 at 5:08 PM, phil [1]p...@plastitar.com wrote:
I'm trying to find a shop that will make 29 long boards. They are
simple 1/16 two layer boards and will have card edge connectors.
Is there a known vendor for
On Tue, 22 Dec 2009, phil wrote:
I'm trying to find a shop that will make 29 long boards. They are
simple 1/16 two layer boards and will have card edge connectors.
Is there a known vendor for this type of work?
Thank you, Phil Taylor
What, praytell, are you planning to put on a
On Dec 22, 2009, at 2:05 PM, David Griffith wrote:
On Tue, 22 Dec 2009, phil wrote:
I'm trying to find a shop that will make 29 long boards. They are
simple 1/16 two layer boards and will have card edge connectors.
Is there a known vendor for this type of work?
Thank you, Phil Taylor
Kyle Bassett wrote:
why so long? if you don't mind me asking...
They are a replacement board for this machine:
http://plastitar.com/flickinger/ak_flick_3JAN2007/front_3.JPG
Phil
___
geda-user mailing list
geda-user@moria.seul.org
On Dec 22, 2009, at 5:52 PM, phil wrote:
why so long? if you don't mind me asking...
They are a replacement board for this machine:
http://plastitar.com/flickinger/ak_flick_3JAN2007/front_3.JPG
*thud*(--- dave falls on floor)
--
Dave McGuire
Port Charlotte, FL
On Tue, Dec 22, 2009 at 02:52:47PM -0800, phil wrote:
Kyle Bassett wrote:
why so long? if you don't mind me asking...
They are a replacement board for this machine:
http://plastitar.com/flickinger/ak_flick_3JAN2007/front_3.JPG
If you can live with = 16x16 modules I think your cost
On Dec 22, 2009, at 2:52 PM, phil wrote:
Kyle Bassett wrote:
why so long? if you don't mind me asking...
They are a replacement board for this machine:
http://plastitar.com/flickinger/ak_flick_3JAN2007/front_3.JPG
That's awesome! you might want to tessellate your boards to make the
On Dec 22, 2009, at 2:08 PM, phil wrote:
I'm trying to find a shop that will make 29 long boards. They are
simple 1/16 two layer boards and will have card edge connectors.
Is there a known vendor for this type of work
I suspect any of them can do any board that fits in a panel, and the
11 matches
Mail list logo