@moria.seul.org
To: geda-user@moria.seul.org
Subject: Re: gEDA-user: Vias/Masked
Date: Sun, 3 Dec 2006 11:18:22 -0500
Is there a command in PCB that I can issue that gets back the old
masked vias so the tin is available on the fabricated boards?
View solder mask, then 'k
with
pins and traces).
From: DJ Delorie [EMAIL PROTECTED]
Reply-To: gEDA user mailing list geda-user@moria.seul.org
To: geda-user@moria.seul.org
Subject: Re: gEDA-user: Vias/Masked
Date: Mon, 4 Dec 2006 12:51:39 -0500
In PCB it shows the relief around the mask if I use the'k' command.
However
What version of pcb? I thought I added a fix for this, maybe it's
just my local copy.
FYI my lesstif key mapping is:
{Clear Object =10 mil a={K Keyk} ChangeClearSize(Object,=10,mil)}
So, *my* 'k' key sets the mask to be 10 mil, which I think means
bigger than the object. The whole
In older versions of PCB the vias were masked so that the via's tin was
exposed on the boards. In the latest version of PCB my vias are not masked
and thus when the boards are fabricated the vias are insulated with the
green film. Is there a command in PCB that I can issue that gets back the
4 matches
Mail list logo