Choose File->Export instead.
Have you gone through the pcb tutorial at
http://www.delorie.com/pcb/docs/gs/ ?
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
> From: DJ Delorie
> Subject: Re: gEDA-user: gsch2pcb output file does not load on pcb
> To: geda-user@moria.seul.org
> Cc: geda-user@moria.seul.org
> Message-ID: <200903170110.n2h1arg4028...@envy.delorie.com>
>
>
> Right, the parser is seeing (for example) 0603
Right, the parser is seeing (for example) 0603.fp and converting the
"0603" to the new footprint, leaving the rest of the line intact.
Also, avoid using "-" in footprint names. It's a special character in
M4; use "_" instead.
___
geda-user mailing li
> 2. Re: gsch2pcb output file does not load on pcb (DJ Delorie)
>
> This tells me that you had a file-based footprint that was the same
> name as an m4-based footprint but with a ".fp" on it. You can't do
> that *and* have the m4 library be first in your path. I suggest
> renaming your footprint
> Element(0x00 "" "" "" 160 0 3 100 0x00)
> (
> ...
> )
> fp(JUMPER1.fp,F1,unknown)
This tells me that you had a file-based footprint that was the same
name as an m4-based footprint but with a ".fp" on it. You can't do
that *and* have the m4 library be first in your path. I suggest
renaming you
Hi ...,
I generated schematic run the gsch2pcb up to gerber plot, with few bump
along the way. So far so good, then for various reason I had to change
the design so, I decided to start from ground zero, new directory, new
schematic, but the .pcb file generated by gsch2pcb when try to load on
pcb a
6 matches
Mail list logo