ahhh a rat in my mind is a potential trace between two points of a
netlist. If you want to draw a trace that isn't part of the netlist then
a rat has no meaning.
at least in my mind.
Steve M.
Lope De Vega wrote:
Check me if I am wrong... you have a pin that isn't
part of a net and
you are
Lope De Vega wrote:
Hello,
I've got a chip on my layout. In gscheme I didn't bind
some of it's pins, though I'd like to, once in pcb,
add a via and connect the pin to it, How do you use to
do this?
Are you trying to add break out pads so that you can get to the pins
in a prototyping
On Fri, 2007-12-07 at 00:01 -0800, Steve Meier wrote:
ahhh a rat in my mind is a potential trace between two points of a
netlist. If you want to draw a trace that isn't part of the netlist then
a rat has no meaning.
at least in my mind.
You can actually build a rats-nest in PCB, in very
I've got a chip on my layout. In gscheme I didn't bind some of it's
pins, though I'd like to, once in pcb, add a via and connect the pin
to it, How do you use to do this?
In pcb, I can add rat lines from such a chip's pins to existing
layout components but if I create a via and try to link
Hello,
I've got a chip on my layout. In gscheme I didn't bind
some of it's pins, though I'd like to, once in pcb,
add a via and connect the pin to it, How do you use to
do this?
I've tried connecting it to a terminal in gscheme and
just leaving it like that, though I'm curious.
In pcb, I can
Dang first though that came through my brain was the concept of trying
to shove a rat down a via.
When you say it doesn't work are you talking about the drc complaining?
Steve Meier
Lope De Vega wrote:
Hello,
I've got a chip on my layout. In gscheme I didn't bind
some of it's pins, though
--- Steve Meier [EMAIL PROTECTED] wrote:
Dang first though that came through my brain was the
concept of trying
to shove a rat down a via.
When you say it doesn't work are you talking about
the drc complaining?
Steve Meier
Am no, it doesn't complain, but it doesn't work, nor
to a
I suspect DJ will strigihten you out but I also suspect, though I
haven't used the latest versions, that you can turn off the automatic drc.
Check me if I am wrong... you have a pin that isn't part of a net and
you are trying to route a trace from that pin to a via. And it won't
physically
Check me if I am wrong... you have a pin that isn't
part of a net and
you are trying to route a trace from that pin to a
via. And it won't
physically connect to the via?
That's exactly what I was trying to say, sorry my
english. As you say, if I turn off autoenforce DRC
clearance I can then
On Thu, Dec 06, 2007 at 11:24:12PM -0800, Lope De Vega wrote:
Am no, it doesn't complain, but it doesn't work, nor
to a via or to a hole. What I'm doing is selecting the
pin with the line tool trying to draw a line from it
to via, though it doesn't stick to it.
You can't do that.
You can
10 matches
Mail list logo
