Stephen Liu wrote:
Hi Andrew,
On Fri, 2003-08-29 at 11:19, Andrew Gaffney wrote:
What is IIRC?
If I remember correctly...Don't you speak internet? ;)
Kai in following message mentioned IIRC. I have no idea about it
I was answering your question.
IIRC = If I Remember Correctly
--
Andrew
Hi Kai,
Thanks for your advice.
On Wed, 2003-08-27 at 02:58, Kai Lindenberg wrote:
I use this RAID-0 box to test dual-boot OS, Win2K and Linux. I
may encounter difficulty in this test.
So, to use this os combination, you need an ataraid driver for
windows compatibility. I don't know
Stephen Liu wrote:
What is IIRC?
If I remember correctly...Don't you speak internet? ;)
--
Andrew Gaffney
--
[EMAIL PROTECTED] mailing list
Hi Stephen,
Am Freitag, 29. August 2003 04:24 schrieb Stephen Liu:
[...]
Can gentoo see a single hard drive and Win2K partition as well,
not 2 hard drives?
yes, that's the right to exist for the ataraid drivers besides md.
Kai
--
[EMAIL PROTECTED] mailing list
Hi Kai,
I use this RAID-0 box to test dual-boot OS, Win2K and Linux. I may
encounter difficulty in this test. Win2K can see the raid controller
but Gentoo can't. After first installing Win2K and coming to installing
Linux the latter can't see the raid controller but 2 drives. Gentoo
will be
Hi Stephen,
Am Samstag, 23. August 2003 18:09 schrieb Stephen Liu:
The RAID-0 box is for test purpose. The RAID controller needs a
driver to run but it works for Windows only. There is no driver
for Linux therefore Redhat can't see a single drive but 2 drives
instead.
I have a Promise and
Hi Stephen,
Am Samstag, 23. August 2003 04:13 schrieb Stephen Liu:
I am going to install Gentoo (2 CDs) on a RAID-0 box and am
uncertain whether I have to issue following command at prompt
when installation begins;
# gentoo doataraid
Connection of hard drives
PCI RAID controller -
Hi all folks,
Just join this list.
I am going to install Gentoo (2 CDs) on a RAID-0 box and am uncertain
whether I have to issue following command at prompt when installation
begins;
# gentoo doataraid
Connection of hard drives
PCI RAID controller - z-cyber,0,1,0+1
1st hard drive - connected
