Hi,
I looked at the torrents page before---http://torrents.gentoo.org/---but
the only package files are for architectures other than x86. If I could
find the CD image, then I know how to use emerge to refer to the CDROM for
package installation; I just can't find a CD image anywhere. Is there a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joseph Kulisics wrote:
> Hi,
>
> I'm trying to prepare a very old system for use in a laboratory, and
> while I normally do the source installation, the initial parts of the
> installation of this old system were so slow that I don't think a source
Am Donnerstag, 27. April 2006 19:24 schrieb ext Matthias Bethke:
> Hi Mick,
> on Sunday, 2006-04-16 at 19:48:00, you wrote:
> > 2. How can I get the gpg-agent to start if I do not use KDM, but XDM
> > with fluxbox? (I added eval "$(gpg-agent --daemon)" in my ~/.xsession
> > with no effect).
em
On Friday 28 April 2006 17:08, Joseph Kulisics wrote:
> Does anyone know where you can download an image of preceompiled x86
> packages or how you can tell emerge to look for precompiled packages on
> the web?
Try http://kororaa.org/static.php?page=static060311-170736
(Gentoo-based binary distr
Hi,
I'm trying to prepare a very old system for use in a laboratory, and
while I normally do the source installation, the initial parts of the
installation of this old system were so slow that I don't think a source
installation is practical. I would like to use binary packages for
installation,
Burn a knoppix CD and see if it keeps happening under Knoppix. That
is, if Knoppix isn't configured, out the box, to turn off your screen
like that.
If it does, it's a Linux configuration issue, if it doesn't, then it's
hardware. Do you have Windows installed on that machine? Same deal.
Justi
but you have to be sure you click in the vmware window first or it will
not have focus for the F8
same applies when using F2 to get into the vmware bios.
sometimes u need to be pretty quick.
On Thu, 27 Apr 2006 20:14:55 -0700
Richard Fish wrote:
> On 4/27/06, Michael W. Holdeman <[EMAIL PROTEC
I have checked my bios and monitor and cant find anything there? Does
anybody have any other ideas??
I am using a desktop AMD64 with Gentoo 2.6.16r1 and Dell 2405FPW
screen
Cheers
Geoff
On 22:34 Thu 27 Apr , JimD wrote:
> Geoff wrote:
> > My screen keeps going blank aft
On Fri, 2006-04-28 at 10:47 +1000, Geoff wrote:
> My screen keeps going blank after about 5 miniutes. I have DPMS turned
> off and still my screen goes blank. I dont have a screen saver set.
> Does anybody know how to stop this?
X seems to do it regardless of what you have dpms set to. Try turnin
On 4/27/06, Michael W. Holdeman <[EMAIL PROTECTED]> wrote:
> Does anyone here running vmware workstation know how to start winxp pro in
> safe mode with vmware?
Just like with real hardware...F8 after you see the BIOS screen disappear.
-Richard
--
gentoo-user@gentoo.org mailing list
Does anyone here running vmware workstation know how to start winxp pro in
safe mode with vmware?
Mike
--
Michael W. Holdeman
Fire Chief
Porter Emergency Services
Powered by Gentoo Linux www.gentoo.org |
Kernel 2.6.15-ck2 |
VMWar
Check your BIOS. Sometimes there's a timeout in there, especially for
notebooks...
"You had me at EHLO" --E.Webb (10.04.05)
> -Original Message-
> From: Geoff [mailto:[EMAIL PROTECTED]
> Sent: Thursday, April 27, 2006 5:47 PM
> To: gentoo-user@gentoo.org
> Subject: [gentoo-user] stoppi
Geoff wrote:
> My screen keeps going blank after about 5 miniutes. I have DPMS turned off
> and still my screen goes blank. I dont have a screen saver set. Does anybody
> know how to stop this?
>
> Geoff.
>
> REMEMBER:- Those that get what they want, are the ones who show up to get
> it
C
My screen keeps going blank after about 5 miniutes. I have DPMS turned off and
still my screen goes blank. I dont have a screen saver set. Does anybody know
how to stop this?
Geoff.
REMEMBER:- Those that get what they want, are the ones who show up to get it
--
gentoo-user@gentoo.org maili
Hi,
On Wed, 2006-04-26 at 22:00 +0200, Jannis Achstetter wrote:
> I don't say you have to but if I were you I would:
> - - update the xorg to 7.X
> - - build agpgart for your chipset into the kernel
> - - build the DRM for the ATI Radeon into the kernel
can you specify what kernel version you're
Outlook 2003 is 1000 times better than 2000 or even 2002
Office 2000 was a piece of poo.
--
gentoo-user@gentoo.org mailing list
On Monday 24 April 2006 3:30 pm, Glenn Enright wrote:
> Yeah I been through this too.
> I get this error when trying to play movie files, sound file work fine
> (Gecko:17960): Gtk-WARNING **: Can't set a parent on widget which has a
> parent
rebuilding xine-lib seems to have fixed it.
--
Alaska,
On 4/27/06, Ptitjack <[EMAIL PROTECTED]> wrote:
> eselect opengl set ati
> Ati Radeon as module
>
> Driver "radeon"
Are you trying to use the open-source driver and (new) DRI module in
the kerrnel, or the ATI opengl implementation? Because right now you
are mixing the ATI and the op
On Friday 28 April 2006 00:26, Jannis Achstetter wrote:
> > Hi all,
> >
> > [...] xorg.conf :
> >
> > Section Device Identifier "ATI Graphics Adapter" Driver
> > "radeon"
> >
> > Option "UseFastTLS" "0" Option "BlockSignalsOnLock" "on"
> > Option "UseInternalAGPGART" "yes" Option
>
On Thursday 27 April 2006 21:59, Ptitjack wrote:
> Hi all,
>
> I have upgraded xorg-x11 to v7 and every seems ok but rather slow and I
> can't get the 3d.
> I use a new kernel (gentoo-sources-2.6.16-r3) and ATI radeon 9600
> (RV350) graphic card.
> eselect opengl set ati
>
> Kernel options :
> /dev
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Hi all,
>
> [...] xorg.conf :
>
> Section Device Identifier "ATI Graphics Adapter" Driver
> "radeon"
>
> Option "UseFastTLS" "0" Option "BlockSignalsOnLock" "on"
> Option "UseInternalAGPGART" "yes" Option
> "ForceGenericCPU" "no" Bus
On Thursday 27 April 2006 16:10, Jose Maria Alvarez Fernandez wrote:
> Hi to all!!
>
> I'm trying to compile kwin 3.5.2-r1 with xcomposite extensions, but I get
> the following error:
...snip...
> I'm using qt 3.3.6 (from nxsty's overlay) and kde 3.5.2 (with pertty
> patches). Can anyone give me a
Hi to all!!
I'm trying to compile kwin 3.5.2-r1 with xcomposite extensions, but I get the
following error:
/bin/sh ../libtool --silent --mode=compile --tag=CXX
x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I.. -I./lib
-I/usr/kde/3.5/include -I/usr/qt/3/include -I. -DQT_THREAD_SUPPORT
-D
The following script is run as part of a nitely cron job.
//garbanzo/home/festus > cat /usr/bin/emerge_sync.sh
#! /bin/bash
## /usr/bin/emerge_sync.sh
# Sync now
/usr/sbin/eix-sync 2>&1
glsa-check --test all 2>&1 | mailx -s "GLSA check on $(hostname)"
[EMAIL PROTECTED]
emerge world --update --d
Hi all,
I have upgraded xorg-x11 to v7 and every seems ok but rather slow and I
can't get the 3d.
I use a new kernel (gentoo-sources-2.6.16-r3) and ATI radeon 9600
(RV350) graphic card.
eselect opengl set ati
Kernel options :
/dev/agpgart as module
Direct Rendering Manager as module
Ati Radeon as
> What you need to do is create a .conf file for your second
> tunnel, and then link /etc/init.d/openvpn to /etc/init.d/.
> Then you can start the second tunnel with either "/etc/init.d/
> start", or by using rc-update to add to the runlevel of your
> choice. For example:
>
> cp /etc/openvpn/open
> Used to be you could have multiple tunnels open with vpn. when it changed
> to
> require /etc/openvpn/openvpn.conf, instead of launching all the tunnels, i
> can no longer figure out how to open multiple tunnels. the docs seem to
> mention an /etc/conf.d/openvpn file, but that didn't get create
Ptitjack wrote:
> Hi all,
>
> I have some problem with gentoo-sources-2.6.16-r3 and ati-drivers.
> Everything works fine when logging in, but my pc freezes without any
> error message when logging out.
> Do you get that same trouble on your own ?
> I really don't know what to do except downgrading
Hi Mick,
on Sunday, 2006-04-16 at 19:48:00, you wrote:
> 1. What is the relationship between gpg-agent and ssh-agent? Do I need both?
One is for SSH, the other for GPG :) Yes, I don't think either can be made to
work for the other program.
> 2. How can I get the gpg-agent to start if I do not
Ow Mun Heng wrote:
>
> Yes, while those are perfectly valid solutions and I do utilise such a
> solution for me when I switch from Home to Work/Work to Home. (which
> does not cover yet DHCP)
>
> I'm hoping that there is a better way via a deny script for mac addrs.
Do you reboot when you go fro
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> [...]
>
> Is there a specific reason you suggest the Radeon driver from the
> kernel and not from the ebuild? AFAIK, the one you can emerge is
> more up to date most of the time.
>
>
Which driver from the ebuild do you mean? AFAIK you need the DRM
s
Hi guys,I'm trying to install bacula console on my amd64 notebook but I always get the same error after the build:--- ACCESS VIOLATION SUMMARY ---LOG FILE = "/var/log/sandbox/sandbox-app-backup_-_bacula-
1.36.3-r3-26793.log"open_wr: /dev/sg0open_wr:
On Thu, 2006-04-27 at 16:24 +, Ognjen Bezanov wrote:
> On Thursday 27 April 2006 15:10, Uwe Thiem wrote:
> > On 27 April 2006 15:55, Ow Mun Heng wrote:
> > > Hi All,
> > >
> > > In my current situation, my home network has 1 DHCP server for all the
> > > clients on the home network.
> > >
> >
On Thursday 27 April 2006 15:10, Uwe Thiem wrote:
> On 27 April 2006 15:55, Ow Mun Heng wrote:
> > Hi All,
> >
> > In my current situation, my home network has 1 DHCP server for all the
> > clients on the home network.
> >
> > My laptop, also runs a dhcp server, for when I use my laptop as a
>
Roberto,Check out the ALSA howto athttp://gentoo-wiki.com/HOWTO_ALSA_sound_mixer_aka_dmixPlease follow the instructions under section 2 for setting up Alsa.
You will be using the snd-ca0106 driver.On 4/27/06, Roberto Zandonati <[EMAIL PROTECTED]
> wrote:Hi at all, anybody know how to configure the
On 27 April 2006 15:55, Ow Mun Heng wrote:
> Hi All,
>
> In my current situation, my home network has 1 DHCP server for all the
> clients on the home network.
>
> My laptop, also runs a dhcp server, for when I use my laptop as a
> firewall/router at work. (no HUB/switch available)
>
> WHen I
Hi All,
In my current situation, my home network has 1 DHCP server for all the
clients on the home network.
My laptop, also runs a dhcp server, for when I use my laptop as a
firewall/router at work. (no HUB/switch available)
WHen I get home and I plug into the home-network, a newly boote
On 4/26/06, Jannis Achstetter <[EMAIL PROTECTED]> wrote:
Well, I play UT2K4 here and it works. It ain't super-blazing (1,6GHz,512MB RAM, 128MB-Graphics-RAM so can't be too good for such hungrygames) but playable without any problems.Glad to here that!
>> I used them a while ago, but they were quit
Used to be you could have multiple tunnels open with vpn. when it changed to
require /etc/openvpn/openvpn.conf, instead of launching all the tunnels, i
can no longer figure out how to open multiple tunnels. the docs seem to
mention an /etc/conf.d/openvpn file, but that didn't get created on my
On Friday 28 April 2006 12:41 am, Christopher E wrote:
> 1. I am have a error message when booting about snd_via82xx not
> found. FATAL: Module snd_via82xx not found. is the exact message.
>
> I have the driver as part of the kernel, when I don't ALSA then gives
> a message like this:
> ALSA dev
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi to all,
just want to ask is anyone using an alternative of smokeping which is
in the portage. I like smokeping, but it's not in the portage and i
want to use something that's in the portage.
Regards,
Niki
-BEGIN PGP SIGNATURE-
Version: Gnu
Hello all,
if there is any one that can help me with the following two issue I
would be greatful.
1. I am have a error message when booting about snd_via82xx not
found. FATAL: Module snd_via82xx not found. is the exact message.
I have the driver as part of the kernel, when I don't ALSA then g
> Well, I upgraded to Xorg 7 using the "modular Xorg" howto on the gentoo-wiki
> [...]
> So its looking good (definatly better then before). DRI is enabled, but I am
> getting a hard PC lockup (for about a second, with glxinfo saying "wait event
> returned -16").
>
> Also happens when trying to
Hi at all, anybody know how to configure the sound card audigy se with gentoo?
--
Roberto Zandonati
GPG-Fingerprint: 577F CC47 AAD7 A5B9 12D7 F10D 89F8 3BA6 5CA8 58D5
GPG-Keynumber: 0x5CA858D5
--
gentoo-user@gentoo.org mailing list
Richard Fish wrote:
On 4/26/06, Alexander Skwar <[EMAIL PROTECTED]> wrote:
Richard Fish wrote:
> Outlook makes it damn near impossible to properly quote and
> trim a message when replying.
Actually, it does *NOT* - at least not, when you're composing
text/plain mails, as you should.
Which ve
45 matches
Mail list logo
