works, but DRBD keeps telling me about the version disparity.
Is it a problem to run DRBD this way?
I tried emerging sys-cluster/drbd-kernel-8.3.8.1 and
sys-cluster/drbd-8.3.8.1 but drbd-kernel fails to compile..
Thank you in advance,
Coert
elect box
You can tune those settings to specific windows, using `xprop` tool to
know the windows' roles, classes etc.
06.10.2016 14:45, Coert пишет:
Hello all,
I have a machine with 4 monitors attached from 2 nvidia GPUs
Using the proprietary nvidia drivers.
Plasma works, and is aware o
My bad,
the encrypted home partition is on LVM, so I added "after lvm" to the
depend section of /etc/init.d/dmcrypt.
Works like a charm now
On 07/10/2016 08:52, Coert wrote:
Hello all,
I have configured dmcrypt to open my home partition with a passphrase.
in /etc/conf.d/dmcr
te
However when I boot the machine it does not ask for the passphrase.
If I add dmcrypt to the default runlevel however, it does ask for the
passphrase, but by then fstab was already processed.
Any advice?
Kind regards,
Coert
behavior.
Where can I change this?
I have attached my xorg.conf
Thank you,
Coert
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 3840 0
Screen 2 "Screen2" 5760 0
btcd, but it is not compiling,
I basically just need RPC access for payments and balance checking, I do
not need to have the whole blockchain.
That was costing me too much bandwidth anyway.
Do you have any recommendations?
Kind regards,
Coert
valds/linux-2.6.git;a=blob;f=Documentation/filesystems/xfs.txt;hb=HEAD
CMIIW, I never use XFS before in my life.
Rgds,
I use XFS a lot.
It does indeed not need the acl mount option.
Those features are available standard.
Regards,
Coert
On 02/23/2012 01:08 PM, Alan McKinnon wrote:
On Thu, 23 Feb 2012 12:48:35 +0200
Coert Waagmeester wrote:
On 02/23/2012 11:17 AM, Neil Bothwick wrote:
On Thu, 23 Feb 2012 10:51:43 +0200, Coert Waagmeester wrote:
The only thing I can currently think of is maybe the kernel config
files in
On 02/23/2012 11:17 AM, Neil Bothwick wrote:
On Thu, 23 Feb 2012 10:51:43 +0200, Coert Waagmeester wrote:
The only thing I can currently think of is maybe the kernel config
files in /boot?
I'd say it's more likely to be getting it from /proc/config.gz.
But why start with a clean c
On 02/23/2012 10:25 AM, Mick wrote:
On Thursday 23 Feb 2012 08:10:56 Coert Waagmeester wrote:
Hello all,
Usually on gentoo when gentoo-sources gets updated, updating the kernel
went as follows:
eselect kernel set {new kernel}
cd /usr/src/linux
make menuconfig
and then there was a totally
-sources
yet it still seems to find the current config somewhere
Anyway, just wondering,,
Regards,
Coert
Hello all,
Can amd64 distcc compile for a gentoo x86 setup?
Or do I need a 32bit chroot?
Regards,
Coert Waagmeester
next key and then quits.
Is it not supposed to ask for all keys?
Is there another way to configure it?
There is no config file on the lirc website for my remote.
Regards,
Coert
On 05/22/2011 01:36 PM, Mick wrote:
> On Saturday 21 May 2011 23:17:30 walt wrote:
>> On 05/20/2011 04:22 AM, Coert Waagmeester wrote:
>>> On 05/19/2011 04:12 AM, Valmor de Almeida wrote:
>>>> Is SystemRescueCd still a good system rescue tool? The web site has not
>
On 05/19/2011 04:12 AM, Valmor de Almeida wrote:
>
>
> Hello,
>
> Is SystemRescueCd still a good system rescue tool? The web site has not
> been updated for over 1 year. Thanks for other suggestions.
>
> --
> Valmor
>
>
+1
I use it for all my gentoo installations as well.
Have even removed
On 05/14/2011 08:42 AM, Coert Waagmeester wrote:
> Hello all,
>
> Building myself a new media center setup.
> I used to have an old xbox with xbmc. But the CPU is to slow for hi-def
> video.
>
> Now I have a normal PC with keyboard and mouse in its place.
> Normal Gentoo
going to try and put a normal USB plug on one of the old xbox
controllers.
Regards,
Coert
On 04/23/2011 02:50 AM, Mark Shields wrote:
> On Thu, Apr 21, 2011 at 11:41 AM, Dale <mailto:rdalek1...@gmail.com>> wrote:
>
> Coert Waagmeester wrote:
>
>
> Hello Dale,
>
> Managed to fix it.
> I downloaded a new portag
On 04/21/2011 08:26 AM, Dale wrote:
> Coert Waagmeester wrote:
>> Hello all,
>>
>> Since yesterday, when I try to update my gentoo box, certain ebuilds
>> give me the following error:
>>
>>
>>>>> Fetching (15 of 22) media-libs/libsdl-1.2.1
disappear.
Could it be the specific mirror I am using?
Thank you,
Coert
libvirt, and I would like to know if
anyone else here uses the combination of kvm and libvirt?
What is the most dynamic way of automatically setting up virtual
networks per VM? Should I use qemu-ifup?
I do not use routed or NATted virtual nets. only bridging.
Kind regards,
Coert Waagmeester
On 03/28/2011 10:35 AM, Mick wrote:
> On Monday 28 March 2011 09:11:51 Coert Waagmeester wrote:
>> Hello all,
>>
>> Running a box with 2x1TB software raid disks.
>> A while back I read up about disk write caching and it's pros/cons.
>>
>> I then dec
I run a cron job that checks every 10 minutes and turns it
off if it is enabled. But that feels like a somewhat ugly solution...
Kind regards,
Coert Waagmeester
Hello all,
Only just started playing with hardened gentoo.
I have a few normal gentoo amd64 machines already running.
Can I add those to the distcc config for the hardened box?
Or are there indeed special things with the compiler on hardened gentoo?
Regards,
Coert
run it locally?
So far I do not appear to have any problems from this.
Kind regards,
Coert
, start it again, and the the sound works.
Any pointers as to what I could possibly have done wrong?
Regards,
Coert
Enrico Weigelt wrote:
* Coert Waagmeester wrote:
My setup is one 32bit pc with gentoo and another 64bit pc with gentoo
I managed to get this going on the 64bit with a 32-bit chroot, distcc,
and crosstools
Why do you need an 32bit chroot if you're going to use an
crosscompiler an
Coert Waagmeester wrote:
Hello all,
I see the gns3 overlay link is broken
http://code.gns3.net/gns3-overlay/file/ec6bc595d263/gns3-overlay-docs.txt
Do any of you use gns3? what is the recommended way of installing it on
gentoo?
Regards,
Coert Waagmeester
My bad, I found it after some
Neil Bothwick wrote:
On Wed, 10 Nov 2010 11:52:08 +0200, Coert Waagmeester wrote:
My bad, I found it after some more googling in the zugaina overlay.
Eix is able to search overlays, installed and otherwise, for packages. In
this case it shows that sunrise has a newer version that zuigana
Hello all,
I see the gns3 overlay link is broken
http://code.gns3.net/gns3-overlay/file/ec6bc595d263/gns3-overlay-docs.txt
Do any of you use gns3? what is the recommended way of installing it on
gentoo?
Regards,
Coert Waagmeester
some links:
http://www.gentoo.org/proj/en/base/amd64/howtos/index.xml?part=1&chap=2
http://www.gentoo.org/doc/en/cross-compiling-distcc.xml
http://www.gentoo.org/doc/en/distcc.xml
http://www.gentoo.org/proj/en/base/embedded/handbook/index.xml?part=1&chap=2
Regards,
Coert Waagmeester
dhk wrote:
On 11/08/2010 05:28 AM, Coert Waagmeester wrote:
Volker Armin Hemmann wrote:
On Thursday 04 November 2010, dhk wrote:
I've always used the genkernel, but now am trying to make a manual one.
I think the kernel is alright since all the default setting seemed
reasonable and the
ernel and my
own kernel.
Make sure to change that in your /etc/fstab as well.
Dont know if this is always the case though.
Regards,
Coert Waagmeester
Hello all,
Just installed ufed. handy.
I see that ufed places local USE flags with global flags in /etc/make.conf
Is this normal/does it matter?
I always set local flags in /etc/portage/package.use as I read in the
Handbook
Regards,
Coert
other reference to
the file under needed directory; without introducing compexity.
What about a bind mount?
Rgds,
Coert
/en/gentoo-amd64-faq.xml#cflags I can make it:
-O2 -march=core2 -pipe
Is this entirely necessary? Will it cause a big improvement?
If I do change, how do I recompile everything? (like --newuse for USE
changes?)
Thank you,
Coert Waagmeester
Hello all,
Still new to gentoo. I use RHEL a lot.
If I want to set up an x86 distcc solution, do the USE flags need to be
the same on all machines?
Trying to setup/compile all desktop apps on one machine with two
assisting in compilation.
Regards,
Coert Waagmeester
37 matches
Mail list logo
