Hello!
I have a quite good kernel, but today I realised that I need a kernel
module that hadn't been compiled before.
Is there any way to compile only that new module, and not compiling the
whole kernel and all of the modules again?
Thanks,
István
2011-09-09 04:18 keltezéssel, Michael Higgins írta:
On Thu, 08 Sep 2011 10:29:38 +0200
"ifj. Stefán István" wrote:
Hello!
I've installed vmware-player, but can't start it. It outputs a lot of
messages
[ 8< ]
It wont start even if I add a virtual machine config fil
2011-09-08 23:07 keltezéssel, Mick írta:
On Thursday 08 Sep 2011 09:29:38 ifj. Stefán István wrote:
Hello!
I've installed vmware-player, but can't start it. It outputs a lot of
messages (none of them seems to be error msgs) and gives back the prompt:
localhost ~ # vmplayer
Loggi
Hello!
I've installed vmware-player, but can't start it. It outputs a lot of
messages (none of them seems to be error msgs) and gives back the prompt:
localhost ~ # vmplayer
Logging to /tmp/vmware-root/setup-8401.log
filename: /lib/modules/2.6.38-gentoo-r6/misc/vmmon.ko
supported: e
2011-06-15 12:53 keltezéssel, Alan McKinnon írta:
On Wednesday 15 June 2011 11:43:42 ifj. Stefán István wrote:
Hello!
I want to make an update on my Gentoo system and get a lot of
blocking packages.
I use this command for upgarde:
USE="semantic-desktop" emerge -pv --update --new
Hello!
I want to make an update on my Gentoo system and get a lot of blocking
packages.
I use this command for upgarde:
USE="semantic-desktop" emerge -pv --update --newuse --deep world
and the blocking packages are:
[blocks B ] kde-base/nepomuk:4.4 ("kde-base/nepomuk:4.4" is blocking
kde-
Hello,
can I set up the network startup so that eth0 first tries to get address from
a dhcp server, and if it doesn't get any, it sets up with a fixed address?
How can I set up this in the /etc/con.d/net?
Thanks for the help in advance,
István
--
gentoo-user@lists.gentoo.org mailing list
hétfő 15 október 2007 12.45 dátummal Bo Ørsted Andresen ezt írta:
> On Monday 15 October 2007 12:29:42 Stefán István wrote:
> > Thanks for the tip, the manual update was successful.
> > Now I have another problem, when I try to update portage with the emerge
> > command:
hétfő 15 október 2007 11.59 dátummal Daniel Pielmeier ezt írta:
> > > http://www.gentoo.org/proj/en/portage/doc/common-problems.xml
> >
> > I can't update portage:
> >
> > # emerge portage
> > Calculating dependencies /!!! Cannot resolve a virtual package name to an
> > ebuild.
> > !!! This is a bu
hétfő 15 október 2007 11.11 dátummal Bo Ørsted Andresen ezt írta:
> On Monday 15 October 2007 11:00:03 Stefán István wrote:
> > We have a pc that hasn't been updated for a long time ago, and now I tried
> > to update it's portage with the "emerge --sync" c
Hello!
We have a pc that hasn't been updated for a long time ago, and now I tried to
update it's portage with the "emerge --sync" command, but I got the following
error:
>>> Updating Portage cache: 89%!!! Cannot resolve a virtual package name to
an ebuild.
!!! This is a bug, please report it.
Hello!
I try to install the egroupware web application, but for the imap (FeLaMiMail)
support it needs PEAR::Net_Socket php extension. First I had installed is
with portage, but egroupware still complained about it, then I tried to
install it with the pear command, but egroupware still doesn't s
péntek 20 július 2007 15.36 dátummal Neil Bothwick ezt írta:
> On Fri, 20 Jul 2007 15:20:54 +0200, Stefán István wrote:
>
> > I've made the world update width the hal useflag, but in kde I still
> > can't activate hal. In the Control Panel -> Peripherials >
péntek 20 július 2007 10.59 dátummal Alex Schuster ezt írta:
> Stefán István writes:
>
> > I've made the mistake that I compiled kde without the hal use flag.
> > How can I find out which kde packages should be recompiled in order to
> > be able to use hal in k
Hello!
I've made the mistake that I compiled kde without the hal use flag.
How can I find out which kde packages should be recompiled in order to be able
to use hal in kde?
Thanks,
Istvan
--
[EMAIL PROTECTED] mailing list
Thanks for the help, it works now!
But one thing is still not clear for me: why isn't xorg able to determine the
horizsync and vertrefresh rates automatically?
Istvan
szerda 18 július 2007 15.22 dátummal Steve Dommett ezt írta:
> Stefán István wrote:
> > (II) NV(0): Monitor0:
Hello!
I bought an MSI notebook with a 17" LCD display and a GeForce Go 6100 vga
card. My problem is that I can start xorg only in 800x600 or less resolution,
but according to the manual it should operate in 1440x900. Attached you can
see my X config file and the log file. It seems to me that x
Hello!
I wanted to make a big update on my gentoo system, but I got error when
reaching x11-base/x11-drm-20060608 package. It compiles successfully, but the
installation fails:
>>> Install x11-drm-20060608
into /var/tmp/portage/x11-base/x11-drm-20060608/image/ category x11-base
* Installing D
szerda 04 július 2007 15.26 dátummal Stefán István ezt írta:
> Hello!
>
> I got the following error:
>
> * Failed Running automake !
> *
> * Include in your bugreport the contents of:
> *
> * /var/tmp/portage/gnome-base/gnome-vfs-2.16.3-r1/temp/automake-
csütörtök 05 július 2007 03.04 dátummal Rumen Yotov ezt írta:
> On (04/07/07 15:26) Stefán István wrote:
> > Hello!
> >
> > I got the following error:
> >
> > * Failed Running automake !
> > *
> > * Include in your bugreport the contents of:
szerda 04 július 2007 17.18 dátummal Neil Bothwick ezt írta:
> On Wed, 4 Jul 2007 16:33:35 +0200, Stefán István wrote:
>
> > * Include in your bugreport the contents of:
> > *
> >
* /var/tmp/portage/gnome-base/gnome-vfs-2.16.3-r1/temp/automake-244
szerda 04 július 2007 15.34 dátummal Alexander Skwar ezt írta:
> Stefán István <[EMAIL PROTECTED]> wrote:
>
> > What should I do to avoid this problem?
>
> Posting the command that caused the error would be a good start ;)
>
> Copy the 10 or so lines before the
Hello!
I got the following error:
* Failed Running automake !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/gnome-base/gnome-vfs-2.16.3-r1/temp/automake-24490.out
!!! ERROR: gnome-base/gnome-vfs-2.16.3-r1 failed.
Call stack:
ebuild.sh, line 1615: Called dyn_un
kedd 10 április 2007 15.52 dátummal Neil Walker ezt írta:
> StefĂĄn IstvĂĄn wrote:
> > Does anybody know how to set up the drive to be able to write 72GB of data
> > onto it?
> >
>
> 72GB capacity assumes 2:1 compression.
>
Ok, I know that, but how can I set 2:1 compression?
István
--
gento
Hello!
I have problem using our hp dat 72 in our fileserver. I'm not able to put 72
GB of data on the cartridge, though I set the compression to 1 in the
stinit.def file.
Here is the contents of the config file:
# cat /etc/stinit.def
manufacturer=HP model="C7438A" {
scsi2logical=1
mode1 blocks
Hello!
I try to install postgresql and according to the gentoo howto after the emerge
I execute the followning command and get this error:
# emerge --config =postgresql-8.0.12
Configuring pkg...
* Creating the data directory ...
* Initializing the database ...
QA Notice: USE Flag 'kernel_lin
kedd 27 március 2007 10.27 dátummal sbelov ezt írta:
>
> >> i have built-in soundcard AC'97 on the server, but i dont want to sound
> >> modules to be loaded at startup:
> >>
> >> moon ~ # lsmod | grep snd
> >> snd_mpu401 3272 0
> >> snd_mpu401_uart 4000 1 snd_mpu401
> >> sn
kedd 27 február 2007 15.32 dátummal Bo Ørsted Andresen ezt írta:
> On Tuesday 27 February 2007 15:10:23 Stefán István wrote:
> > > Please answer the questions in comment #3 on bug #159563.
> > >
> > > https://bugs.gentoo.org/show_bug.cgi?id=159563#c3
> >
>
kedd 27 február 2007 13.33 dátummal Bo Ørsted Andresen ezt írta:
> On Monday 26 February 2007 18:33:52 Stefán István wrote:
> > Hello!
> > I would like to install beryl, but it needs a lot of package upgrade, and
> > one of them fails to compile. Tha package is x11-libs/libwn
Hello!
I would like to install beryl, but it needs a lot of package upgrade, and one
of them fails to compile. Tha package is x11-libs/libwnck-2.16.3 and the
error message is:
../.libs/libwnck-1.so: undefined reference to `g_object_ref_sink'
collect2: ld returned 1 exit status
make[2]: *** [test-
szerda 31 január 2007 12.21 dátummal Heinz Hombergs ezt írta:
> Am Mittwoch, 31. Januar 2007 Boyd Stephen Smith Jr. wrote:
>
> > File a bug, and be prepared with a patch -- cause there's probably a good
> > reason they are considered "conflicting".
>
> There are some more useflags that are confli
Hello!
I tried to re-emerge php because I need to be compiled with the 'recode' use
flag, but I get this error:
* USE flag 'recode' conflicts with these USE flag(s):
*mysql
* You must disable these conflicting flags before you can emerge this package.
* You can do this by disabling these fl
Hi!
I tried to emerge evolution-2.6.2-r1, and got the following error:
make[2]: *** No rule to make target [EMAIL PROTECTED]@.po', needed by
[EMAIL PROTECTED]@.gmo'. Stop.
make[2]: Leaving directory
`/portage_tmp/portage/evolution-2.6.2-r1/work/evolution-2.6.2/po'
make[1]: *** [all-recursive] E
kedd 21 november 2006 19.21 dátummal Thomas Rösner ezt írta:
> Mark wrote:
> >> > I want to set up default acl to a directory, but it doesn't work:
> >> Have you mounted the file system with -o acl (assuming that its ext3)?
> >
> > Furthermore have you enabled ACL support in the kernel?
>
> If not
szerda 08 november 2006 15.39 dátummal Bo Ørsted Andresen ezt írta:
> On Wednesday 08 November 2006 15:18, Hemmann, Volker Armin wrote:
> > On Wednesday 08 November 2006 15:03, Stefán István wrote:
> > > Hi!
> > > I try to emerge pgp, and get the following er
szerda 08 november 2006 15.18 dátummal Hemmann, Volker Armin ezt írta:
> On Wednesday 08 November 2006 15:03, Stefán István wrote:
> > Hi!
> > I try to emerge pgp, and get the following error when the compilation is
> >
> > finish
Hi!
I try to emerge pgp, and get the following error when the compilation is
finished:
>>> Source compiled.
--- ACCESS VIOLATION SUMMARY
---
LOG FILE = "/var/log/sandbox/sandbox-app-crypt_-_gnupg-1.9.20-r3-26975.log"
access_wr: /
-
csütörtök 02 november 2006 15.14 dátummal Alan McKinnon ezt írta:
> On Thursday 02 November 2006 16:13, Stefán István wrote:
> > I've installed a Gentoo onto a laptop which has an intel graphics
> > chip: 00:02.0 VGA compatible controller: Intel Corporation
> > 82852
Hello!
I've installed a Gentoo onto a laptop which has an intel graphics chip:
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated
Graphics Device (rev 02)
X doesn't want to start, here is the errors in the log:
(EE) I810(0): unknown type(0x)=0xff
(EE) I810(0): VB
kedd 24 október 2006 13.59 dátummal Dale ezt írta:
> Stefán István wrote:
> > Hello!
> > What is the reason of the lack of binary packages of openoffice and
firefox
> > for ppc based machines?
> > Compiling oo takes a very long time, and on my machine it even ends wit
Hello!
What is the reason of the lack of binary packages of openoffice and firefox
for ppc based machines?
Compiling oo takes a very long time, and on my machine it even ends with a
segmentation fault, so I couldn't install oo at all. In other ppc based
distroes I saw binary oo packages.
Thank
szerda 04 október 2006 15.38 dátummal Bo Ørsted Andresen ezt írta:
> On Wednesday 04 October 2006 15:28, Stefán István wrote:
> > I have problem with the locale settings of my system. My main problem is,
> > that I can't use some special hungarian characters in file names.
Hello!
I have problem with the locale settings of my system. My main problem is, that
I can't use some special hungarian characters in file names. They don't even
appear on the console screen, when I try to type them.
But in X applications mostly I can use these characters. But if I create a
dir
hétfő 25 szeptember 2006 14.49 dátummal Bo Ørsted Andresen ezt írta:
> On Monday 25 September 2006 14:42, Stefán István wrote:
> > I would like to use the program metioned in the subject. I installed the
> > package, but I don't know how to start the program itself.
> >
Hello!
I would like to use the program metioned in the subject. I installed the
package, but I don't know how to start the program itself.
The acpid is running, the battery kernel module is loaded, and
in /proc/acpi/battery there is the battery.
# cat /proc/acpi/battery/BAT0/state
present:
szerda 20 szeptember 2006 11.32 dátummal Stefán István ezt írta:
> Hello!
> I've tried to install attr-2.4.28-r1 package to a machine, but got the
> following error:
> g++: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/../../../crti.o: No such file
or
> directory
> g++: /
szerda 20 szeptember 2006 11.00 dátummal Remy Blank ezt írta:
> Stefán István wrote:
> > Okay, I think I have to use acl. I've read its documentation, and set up
the
> > following acl's:
> >
> > setfacl -m d:u::rw /home/stefi/kepek/
> > setfacl -m d:
szerda 20 szeptember 2006 12.16 dátummal Friedrich Göpel ezt írta:
> On 9/20/06, Stefán István <[EMAIL PROTECTED]> wrote:
> > It's true, because I have 3.3.5 installed. But on another machine, where
also
> > gcc-3.3.5 is installed, the attr compiles succesfully.
> &
szerda 20 szeptember 2006 12.14 dátummal Neil Bothwick ezt írta:
> On Wed, 20 Sep 2006 11:32:18 +0200, Stefán István wrote:
>
> > It's true, because I have 3.3.5 installed. But on another machine,
> > where also gcc-3.3.5 is installed, the attr compiles succesfully.
>
Hello!
I've tried to install attr-2.4.28-r1 package to a machine, but got the
following error:
g++: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/../../../crti.o: No such file or
directory
g++: /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.4/crtbeginS.o: No such file or
directory
g++: /usr/lib/gcc-lib/i686-
kedd 19 szeptember 2006 14.15 dátummal Remy Blank ezt írta:
> Stefán István wrote:
> > Is there any way to tell
> > the Linux to automatically set the rights to 664 or 775 in this common
> > directory (and only in this)?
>
> This is normally done by setting the umas
Hello!
We have a file server, and there are a common directory for a group of a
users. I set this common folder's permission to 2775 and that results that a
newly created file or directory will have the same goup owner as the common
dir. But the problem is, that if someone creates a file or a d
péntek 08 szeptember 2006 13.34 dátummal Thomas Kear ezt írta:
> On Friday 08 September 2006 11:06 pm, Stefán István wrote:
> > Thanks for the help, I downloaded the exe file, but it is not a zip
> > archive, I can't uncompress it.
> > I tried to execute it via wine, th
csütörtök 07 szeptember 2006 08.25 dátummal Richard Fish ezt írta:
> On 9/6/06, Stefán István <[EMAIL PROTECTED]> wrote:
> > That would be good, cause I don't nedd mono at all, so if it is not
required
> > for hugin, then I won't struggle to install i
péntek 08 szeptember 2006 12.31 dátummal Helmut Jarausch ezt írta:
> On 8 Sep, Stefán István wrote:
> > Hello!
> > We have a printer stated in $subject, and looking for a cups driver for
it.
> > Does anyone know which driver can we use for it?
> >
>
> Just try
Hello!
We have a printer stated in $subject, and looking for a cups driver for it.
Does anyone know which driver can we use for it?
Thanks,
Istvan
--
gentoo-user@gentoo.org mailing list
csütörtök 07 szeptember 2006 01.12 dátummal David Grant ezt írta:
> By the way, hugin does not depend on mono, autopano-sift depends on mono. If
> hugin depends on autopano-sift or hugin, then that is a bug. Looks like it
> does depend on autopano-sift, but it probably shouldn't as it is not
> requ
szerda 06 szeptember 2006 12.08 dátummal Neil Bothwick ezt írta:
> On Wed, 6 Sep 2006 10:58:39 +0200, Stefán István wrote:
>
> > > Change PORTAGE_TMPDIR (in /etc/make.conf) to point somewhere with
> > > plenty of space.
> >
> > I set PORTAGE_TMPDIR to /port
szerda 06 szeptember 2006 10.38 dátummal Neil Bothwick ezt írta:
> On Wed, 6 Sep 2006 08:37:17 +0200, Stefán István wrote:
>
> > the translation of the hungarian part of the message is: no space left
> > on the device.
> >
> > But on what device? I checked the part
Hello,
I want to install hugin which depends on mono, and during the installation of
mono-1.1.13.2 I get this error:
** (./class/lib/monolite/mcs.exe:1463): CRITICAL **:
_wapi_shm_semaphores_init: semget error: Nincs hely az eszközön. Try
deleting some semaphores with ipcs and ipcrm
the trans
Hello!
I'm not able to activate dma mode for cdrom drive in my laptop.
# hdparm -d1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma= 0 (off)
I have the following hardvers:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/
péntek 28 július 2006 13.05 dátummal Neil Bothwick ezt írta:
> On Fri, 28 Jul 2006 12:55:31 +0200, Stefán István wrote:
>
> > I'm afraid that kde was emerged without tha hal use flag. What parts of
> > it should I reemerge with this useflag?
>
> Either add hal to yo
péntek 28 július 2006 11.51 dátummal Neil Bothwick ezt írta:
> On Fri, 28 Jul 2006 11:22:57 +0200, Stefán István wrote:
>
> > I have some little problems with ivman, and I hope somebody could help
> > me:
> > - It does not creates entries in fstab, so when I put in some
Hello!
I have some little problems with ivman, and I hope somebody could help me:
- It does not creates entries in fstab, so when I put in some device, though
it is mounted it is not shown on kde's desktop.
- The mounted devices only can be unmounted by root, not as simple user. This
is problem
szerda 26 július 2006 13.47 dátummal Stefán István ezt írta:
> szerda 26 július 2006 08.21 dátummal Donnie Berkholz ezt írta:
> > Stefán István wrote:
> > > Calculating dependencies... done!
> > > [ebuild R ] x11-base/xorg-x11-6.8.2-r8 USE="bitmap-fonts dlload
szerda 26 július 2006 08.21 dátummal Donnie Berkholz ezt írta:
> Stefán István wrote:
> > Calculating dependencies... done!
> > [ebuild R ] x11-base/xorg-x11-6.8.2-r8 USE="bitmap-fonts dlloader
ipv6
> > nls opengl pam truetype-fonts type1-fonts xv -3dfx -3dnow
szerda 26 július 2006 08.21 dátummal Donnie Berkholz ezt írta:
> Stefán István wrote:
> > Calculating dependencies... done!
> > [ebuild R ] x11-base/xorg-x11-6.8.2-r8 USE="bitmap-fonts dlloader
ipv6
> > nls opengl pam truetype-fonts type1-fonts xv -3dfx -3dnow
kedd 25 július 2006 22.43 dátummal Richard Fish ezt írta:
> On 7/25/06, Stefán István <[EMAIL PROTECTED]> wrote:
> > Meanwhile I was able to install the ati-drivers by adding
> > ACCEPT_KEYWORDS="~x86" to emerge and install the latest version in
portage.
> >
kedd 25 július 2006 21.28 dátummal Mick ezt írta:
> On Tuesday 25 July 2006 19:32, Richard Fish wrote:
>
> > 8.21.7 seems quite old to me, especially to try and use with a new
> > kerrnel. Can you try something more recent, like 8.26.18-r1? You'll
> > have to accept the ~arch keyword for this:
>
kedd 25 július 2006 20.58 dátummal Ptitjack ezt írta:
> Stefán István a gentiment tapote:
> > !!! ERROR: x11-drivers/ati-drivers-8.21.7-r1 failed.
> > Call stack:
> > ebuild.sh, line 1539: Called dyn_install
> > ebuild.sh, line 1013: Called src_install
> &g
,
>
> is that the newest version in portage? if not i would sujest upgrading as
> each version of ati-drivers is only good for certian kernels
>
> Cynyr
>
> On 7/25/06, Stefán István <[EMAIL PROTECTED]> wrote:
> >
> > Hello!
> > I have a big problem ins
Hello!
I have a big problem installing ati driver. Please somebody help.
When I try to install it I get a huge error message:
localhost fglrx # emerge -v ati-drivers
Calculating dependencies... done!
>>> Emerging (1 of 1) x11-drivers/ati-drivers-8.21.7-r1 to /
>>> checking ebuild checksums ;-)
>>
hétfő 10 július 2006 13.40 dátummal Andreas Burghardt ezt írta:
> On Mon, Jul 10, 2006 at 12:26:08PM +0100, Mick wrote:
> > On Monday 10 July 2006 12:10, Andreas Burghardt wrote:
> > > *udma2
>
> I'm very sorry, but you all see that I'm quite new to Linux ...
> If UDMA2 is activated for the drive
Hello!
How can I make syslog-ng to accept connections from remote hosts?
Thanks,
Istvan
--
gentoo-user@gentoo.org mailing list
csütörtök 01 június 2006 11.11 dátummal Stefán István ezt írta:
> Hello List,
>
> we have a problem that sometimes arises on the clients:
> using kde, and sometimes the background and the icons from the desktop
> dissappears. But otherwise the client works well, programs can
Hello List,
we have a problem that sometimes arises on the clients:
using kde, and sometimes the background and the icons from the desktop
dissappears. But otherwise the client works well, programs can be started. If
they log off and log in again, the backgrounds and the icons appeares again.
kedd 30 május 2006 10.19 dátummal Christian Heinz ezt írta:
> On Tue, 30 May 2006 10:00:54 +0200
> Stefán István <[EMAIL PROTECTED]> wrote:
>
> > Hello List!
> >
> > Does somebody know how to start a windows msi install file with wine?
> > If I just sim
Hello List!
Does somebody know how to start a windows msi install file with wine?
If I just simply try to start it I get the following error message:
$ wine /mnt/cdrom/Installation/HydroGeo_Analyst.msi
wine: could not load L"Z:\\mnt\\cdrom\\Installation\\HydroGeo_Analyst.msi":
Bad EXE format for
Hello List!
We have a small network with two 24 port switches. We assign ip address to
clients by dhcp based on the clients mac address, and have a pool of
addresses for guest notebooks. My problem is that if someone plugs a notebook
into the network and gets an ip then I can't find out the loc
csütörtök 25 május 2006 14.37 dátummal Stefán István ezt írta:
> csütörtök 25 május 2006 13.58 dátummal Neil Bothwick ezt írta:
> > On Thu, 25 May 2006 13:20:36 +0200, Stefán István wrote:
> >
> > > I have a Canon usb scanner and I have problem using it with xsane.
>
csütörtök 25 május 2006 13.58 dátummal Neil Bothwick ezt írta:
> On Thu, 25 May 2006 13:20:36 +0200, Stefán István wrote:
>
> > I have a Canon usb scanner and I have problem using it with xsane.
> > The sane-find-scanner finds it:
> > found USB scanner (vendor=0x04a9
Hello!
I have a Canon usb scanner and I have problem using it with xsane.
The sane-find-scanner finds it:
found USB scanner (vendor=0x04a9 [Canon], product=0x220e [CanoScan],
chip=LM9832/3) at libusb:003:004
But "scainmage -L" doesn't find it.
I don't know what to do next.
If I just simply star
hétfő 08 május 2006 11.32 dátummal Walter Dnes ezt írta:
> I've been so used to playing mp3 files that I'm lost with real live
> audio CDs (not a data CD with mp3 files). The XMMS docs aren't really
> helpful. Do I need an additional plug-in? mplayer is worse.
> "mplayer /dev/cdrom" tries to p
Hello!
Does somebody have any experience with $SUBJECT?
I bought this card and downloaded the driver from Adaptec website. I tried to
merge it into my kernel tree, but during the merge I got error message:
# ./Build ../driver-aar81xx/ ../shipped-binary ../../linux-2.6.15-gentoo-r1
merge_driver=
Hello!
I'm trying to set up local device access with ltsp-4.2, and I have problem
installing X11 library support for perl. I'm using gentoo and I don't find
any package for this. Does anybody know what is the name of the package?
Thanks,
Istvan
--
gentoo-user@gentoo.org mailing list
hétfő 27 március 2006 09.05 dátummal Stefán István ezt írta:
> Hello List,
>
> I have a little problem with r3.to.rast: when I display the created slices
> I see that they are divided into square spaces. Does somebody know why they
> are divided?
>
Sorry, it was posted to a
Hello List,
I have a little problem with r3.to.rast: when I display the created slices I
see that they are divided into square spaces. Does somebody know why they are
divided?
Thaks,
Istvan
--
gentoo-user@gentoo.org mailing list
péntek 24 március 2006 04.37 dátummal Richard Fish ezt írta:
> On 3/23/06, Stefán István <[EMAIL PROTECTED]> wrote:
> > I changed my Matrox G550 card to a Radeon 7500, executed the Xorg
> > -configure command, and the created config file works perfectly. It seems
> > th
csütörtök 23 március 2006 08.30 dátummal Stefán István ezt írta:
> csütörtök 23 március 2006 07.30 dátummal Stefán István ezt írta:
> > Hello again,
> >
> > I tried to execute "xvidtune -show" during my monitor is in big
> > resolutions:
> >
> >
csütörtök 23 március 2006 07.30 dátummal Stefán István ezt írta:
> Hello again,
>
> I tried to execute "xvidtune -show" during my monitor is in big
> resolutions:
>
> # xvidtune -show
> "800x600" 49.50800 816 896 1056600 601 604
Hello again,
I tried to execute "xvidtune -show" during my monitor is in big resolutions:
# xvidtune -show
"800x600" 49.50800 816 896 1056600 601 604 625 +hsync +vsync
# xvidtune -show
"1024x768" 78.80 1024 1040 1136 1312768 769 772 800 +hsync +vsync
# xvidtune -s
Hello,
szerda 22 március 2006 23.55 dátummal Richard Fish ezt írta:
> ...
> I suggest to remove any HorizSync or VertRefresh lines from xorg.conf,
> and let the autodetection work.
>
Thank you for the help, I tried what you suggested, but my monitor still not
work resolution above 800x600.
Here is
szerda 22 március 2006 16.45 dátummal Richard Fish ezt írta:
> On 3/22/06, Stefán István <[EMAIL PROTECTED]> wrote:
> > Okay, I paste the relevant lines from my config file:
>
> Please also post the contents of /var/log/Xorg.0.log
Ok, but it's a bit long becuse I don&
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndS
Hello List!
Please somebody help me to set up my monitor to 1280x1024 resolution!
I bought an LG L1730P lcd monitor and I can only use it in 800x600 resolution.
I'm using xorg.conf file that was created with the X -configure command.
I tried to boot with knoppix, it starts X in 1024x768. Then I tr
Hi!
I'm using kdm and kde, and I would like to start a script automatically when a
user log in and out from kde. For the login I find ~/.kde/Autostart
directory, but for log out I don't find a corresponding directory.
Thank you,
Istvan
--
gentoo-user@gentoo.org mailing list
96 matches
Mail list logo
