Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-16 Thread Gilberto Martins
This problem was solved already, I really commited a huge compilatiom mistake. So, I decided using genkernl to help. But this is another thread ... 2006/2/15, Emmanuel Durin <[EMAIL PROTECTED]>: > The make module_install command installs the modules into > /lib/modules/2.x.xx/. Search for your fil

Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-15 Thread Emmanuel Durin
The make module_install command installs the modules into /lib/modules/2.x.xx/. Search for your file into this directory instead of into the sources directory. If you can't find it, go to /lib/modules/2.x.xx/ and browse to see if there is some modules. If you find some, then you should probably hav

Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-14 Thread Stroller
On 14 Feb 2006, at 13:27, Gilberto Martins wrote: ... I tried to compile the kernel following the guidelines in the handbook, like make menuconfig, make and make module_install. But it seems the the modules were not generated. I tried "find /usr/ -iname "*"3c59x*" but only the source code was l

Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-14 Thread Gilberto Martins
Hi again. > I'm a bit confused by Gilberto's statement: "Of course I had no > network for this." > If you mean that "I have no networking because of this error" and the > modprobe line above makes no difference then I might be inclined to > swap the network card out for another one. Yeah, that is

Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-13 Thread Stroller
On 13 Feb 2006, at 19:24, Steven S. wrote: On Mon, 13 Feb 2006, Gilberto Martins wrote: Now I have only one problem: the ethernet module. During the initiatio, I have the following message: "Failed to load 3c59x". Of course I had no network for this. Add the module name on it's own line in /

Re: [gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-13 Thread Steven S.
On Mon, 13 Feb 2006, Gilberto Martins wrote: Hi all. Now I have only one problem: the ethernet module. During the initiatio, I have the following message: "Failed to load 3c59x". Of course I had no network for this. I tried "lsmod" and saw that no modules were loaded. What shoud I do to config

[gentoo-user] Ethernet Module (3c59x) not recognized

2006-02-13 Thread Gilberto Martins
Hi all. Now I have only one problem: the ethernet module. During the initiatio, I have the following message: "Failed to load 3c59x". Of course I had no network for this. I tried "lsmod" and saw that no modules were loaded. What shoud I do to configure the loading of needed modules at startup ?