How should eth1 and eth2 be
configured in /etc/conf.d/net ?
They should be configured as part of a bridge device (see the
bridging section of /etc/conf.d/net.example) and have the address
assigned (and DHCPD listing on) that bridge device.
Except that this doesn't work on
I'm afraid I can't keep up with you guys here. What I'd like to do is
use eth1 and ath0 on my router to serve the same local network. Can
I bridge them according to net.example to accomplish this? I
understand that I will either need to use a crossover cable with eth1
or attach a switch
Neil Bothwick wrote:
On Mon, 2 Oct 2006 08:18:38 -0700, Grant wrote:
I've never used a switch before. Is there any proprietary software to
configure (like with a router), or is it just a button or two?
Just one button, the power switch :)
Sometimes two ... if you attempt to use
On Monday 02 October 2006 10:18, Grant [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] Router 3rd and 4th net interface problem':
I'm pretty confused. I'm trying to get the system in question to
behave like a solid-state router that you can plug an ethernet
jack
Hi,
On Mon, 2 Oct 2006 10:49:34 -0500
Boyd Stephen Smith Jr. [EMAIL PROTECTED] wrote:
How should eth1 and eth2 be
configured in /etc/conf.d/net ?
They should be configured as part of a bridge device (see the
bridging section of /etc/conf.d/net.example) and have the address
quoth the Thomas T. Veldhouse:
Neil Bothwick wrote:
On Mon, 2 Oct 2006 08:18:38 -0700, Grant wrote:
I've never used a switch before. Is there any proprietary software to
configure (like with a router), or is it just a button or two?
Just one button, the power switch :)
Sometimes two
Hi,
On Thu, 28 Sep 2006 22:06:21 -0500 Boyd Stephen Smith Jr.
[EMAIL PROTECTED] wrote:
On Thursday 28 September 2006 21:43, Grant [EMAIL PROTECTED]
wrote about 'Re: [gentoo-user] Router 3rd and 4th net interface
problem':
I'm pretty confused. I'm trying to get the system in question
On 21:19 Wed 27 Sep , Grant wrote:
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router) and
ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another machine
to one of the new cards (eth1 and eth2). ifconfig
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router) and
ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another machine
to one of the new cards (eth1 and eth2). ifconfig shows the cards are
detected just
On Thu, 28 Sep 2006 07:12:47 -0700, Grant wrote:
config_eth0=192.168.1.2 netmask 255.255.255.0
config_ath0=192.168.0.1 broadcast 192.168.0.255 netmask
config_eth1=192.168.0.1 broadcast 192.168.0.255 netmask
config_eth2=192.168.0.1 broadcast 192.168.0.255 netmask
Do the rest of my
On 07:12 Thu 28 Sep , Grant wrote:
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router)
and
ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another
machine
to one of the new cards (eth1 and eth2).
On Thursday 28 September 2006 05:19, Grant wrote:
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router)
and ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another
machine to one of the new cards (eth1 and eth2).
On 9/27/06, Grant [EMAIL PROTECTED] wrote:
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router) and
ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another machine
to one of the new cards (eth1 and eth2). ifconfig
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router)
and ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another
machine to one of the new cards (eth1 and eth2). ifconfig shows the cards
are detected just
Grant,
I have never made a cross over cable before, probs best to look on google,
there is bound to be a guide somewhere.
As for you settings, I can't see anything wrong with them.
My buddy just told me that most modern NICs do autosensing so they
don't require a crossover cable. Is that
On 9/28/06, Grant [EMAIL PROTECTED] wrote:
eth0 is connected to the WAN (DSL modem/router), and ath0, eth1, and
eth2 are all meant to allow other systems to connect to the LAN via
DHCP. Should I be configuring eth1 and eth2 as 192.168.0.1?
No. Consider the case where your system needs to
eth0 is connected to the WAN (DSL modem/router), and ath0, eth1, and
eth2 are all meant to allow other systems to connect to the LAN via
DHCP. Should I be configuring eth1 and eth2 as 192.168.0.1?
No. Consider the case where your system needs to send an IP packet to
192.168.0.100. How will
On Thursday 28 September 2006 21:18, Grant [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] Router 3rd and 4th net interface problem':
My buddy just told me that most modern NICs do autosensing so they
don't require a crossover cable. Is that right?
Yes, all GigE cards are required to do
On Thursday 28 September 2006 21:43, Grant [EMAIL PROTECTED] wrote
about 'Re: [gentoo-user] Router 3rd and 4th net interface problem':
I'm pretty confused. I'm trying to get the system in question to
behave like a solid-state router that you can plug an ethernet jack
I have a Gentoo router with eth0 connected to the WAN (DSL modem/router) and
ath0 connected to the LAN. It works perfectly.
I've added two ethernet cards and I'm trying to connect from another machine
to one of the new cards (eth1 and eth2). ifconfig shows the cards are
detected just fine, but
20 matches
Mail list logo
