Signed-off-by: Nguyễn Thái Ngọc Duy <pclo...@gmail.com>
---
Documentation/config.txt | 114 +---------------------------------
Documentation/push-config.txt | 113 +++++++++++++++++++++++++++++++++
2 files changed, 114 insertions(+), 113 deletions(-)
create mode 100644 Documentation/push-config.txt
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 609b407afc..2d3baf43fb 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -2551,119 +2551,7 @@ protocol.version::
include::pull-config.txt[]
-push.default::
- Defines the action `git push` should take if no refspec is
- explicitly given. Different values are well-suited for
- specific workflows; for instance, in a purely central workflow
- (i.e. the fetch source is equal to the push destination),
- `upstream` is probably what you want. Possible values are:
-+
---
-
-* `nothing` - do not push anything (error out) unless a refspec is
- explicitly given. This is primarily meant for people who want to
- avoid mistakes by always being explicit.
-
-* `current` - push the current branch to update a branch with the same
- name on the receiving end. Works in both central and non-central
- workflows.
-
-* `upstream` - push the current branch back to the branch whose
- changes are usually integrated into the current branch (which is
- called `@{upstream}`). This mode only makes sense if you are
- pushing to the same repository you would normally pull from
- (i.e. central workflow).
-
-* `tracking` - This is a deprecated synonym for `upstream`.
-
-* `simple` - in centralized workflow, work like `upstream` with an
- added safety to refuse to push if the upstream branch's name is
- different from the local one.
-+
-When pushing to a remote that is different from the remote you normally
-pull from, work as `current`. This is the safest option and is suited
-for beginners.
-+
-This mode has become the default in Git 2.0.
-
-* `matching` - push all branches having the same name on both ends.
- This makes the repository you are pushing to remember the set of
- branches that will be pushed out (e.g. if you always push 'maint'
- and 'master' there and no other branches, the repository you push
- to will have these two branches, and your local 'maint' and
- 'master' will be pushed there).
-+
-To use this mode effectively, you have to make sure _all_ the
-branches you would push out are ready to be pushed out before
-running 'git push', as the whole point of this mode is to allow you
-to push all of the branches in one go. If you usually finish work
-on only one branch and push out the result, while other branches are
-unfinished, this mode is not for you. Also this mode is not
-suitable for pushing into a shared central repository, as other
-people may add new branches there, or update the tip of existing
-branches outside your control.
-+
-This used to be the default, but not since Git 2.0 (`simple` is the
-new default).
-
---
-
-push.followTags::
- If set to true enable `--follow-tags` option by default. You
- may override this configuration at time of push by specifying
- `--no-follow-tags`.
-
-push.gpgSign::
- May be set to a boolean value, or the string 'if-asked'. A true
- value causes all pushes to be GPG signed, as if `--signed` is
- passed to linkgit:git-push[1]. The string 'if-asked' causes
- pushes to be signed if the server supports it, as if
- `--signed=if-asked` is passed to 'git push'. A false value may
- override a value from a lower-priority config file. An explicit
- command-line flag always overrides this config option.
-
-push.pushOption::
- When no `--push-option=<option>` argument is given from the
- command line, `git push` behaves as if each <value> of
- this variable is given as `--push-option=<value>`.
-+
-This is a multi-valued variable, and an empty value can be used in a
-higher priority configuration file (e.g. `.git/config` in a
-repository) to clear the values inherited from a lower priority
-configuration files (e.g. `$HOME/.gitconfig`).
-+
---
-
-Example:
-
-/etc/gitconfig
- push.pushoption = a
- push.pushoption = b
-
-~/.gitconfig
- push.pushoption = c
-
-repo/.git/config
- push.pushoption =
- push.pushoption = b
-
-This will result in only b (a and c are cleared).
-
---
-
-push.recurseSubmodules::
- Make sure all submodule commits used by the revisions to be pushed
- are available on a remote-tracking branch. If the value is 'check'
- then Git will verify that all submodule commits that changed in the
- revisions to be pushed are available on at least one remote of the
- submodule. If any commits are missing, the push will be aborted and
- exit with non-zero status. If the value is 'on-demand' then all
- submodules that changed in the revisions to be pushed will be
- pushed. If on-demand was not able to push all necessary revisions
- it will also be aborted and exit with non-zero status. If the value
- is 'no' then default behavior of ignoring submodules when pushing
- is retained. You may override this configuration at time of push by
- specifying '--recurse-submodules=check|on-demand|no'.
+include::push-config.txt[]
include::rebase-config.txt[]
diff --git a/Documentation/push-config.txt b/Documentation/push-config.txt
new file mode 100644
index 0000000000..0a0e000569
--- /dev/null
+++ b/Documentation/push-config.txt
@@ -0,0 +1,113 @@
+push.default::
+ Defines the action `git push` should take if no refspec is
+ explicitly given. Different values are well-suited for
+ specific workflows; for instance, in a purely central workflow
+ (i.e. the fetch source is equal to the push destination),
+ `upstream` is probably what you want. Possible values are:
++
+--
+
+* `nothing` - do not push anything (error out) unless a refspec is
+ explicitly given. This is primarily meant for people who want to
+ avoid mistakes by always being explicit.
+
+* `current` - push the current branch to update a branch with the same
+ name on the receiving end. Works in both central and non-central
+ workflows.
+
+* `upstream` - push the current branch back to the branch whose
+ changes are usually integrated into the current branch (which is
+ called `@{upstream}`). This mode only makes sense if you are
+ pushing to the same repository you would normally pull from
+ (i.e. central workflow).
+
+* `tracking` - This is a deprecated synonym for `upstream`.
+
+* `simple` - in centralized workflow, work like `upstream` with an
+ added safety to refuse to push if the upstream branch's name is
+ different from the local one.
++
+When pushing to a remote that is different from the remote you normally
+pull from, work as `current`. This is the safest option and is suited
+for beginners.
++
+This mode has become the default in Git 2.0.
+
+* `matching` - push all branches having the same name on both ends.
+ This makes the repository you are pushing to remember the set of
+ branches that will be pushed out (e.g. if you always push 'maint'
+ and 'master' there and no other branches, the repository you push
+ to will have these two branches, and your local 'maint' and
+ 'master' will be pushed there).
++
+To use this mode effectively, you have to make sure _all_ the
+branches you would push out are ready to be pushed out before
+running 'git push', as the whole point of this mode is to allow you
+to push all of the branches in one go. If you usually finish work
+on only one branch and push out the result, while other branches are
+unfinished, this mode is not for you. Also this mode is not
+suitable for pushing into a shared central repository, as other
+people may add new branches there, or update the tip of existing
+branches outside your control.
++
+This used to be the default, but not since Git 2.0 (`simple` is the
+new default).
+
+--
+
+push.followTags::
+ If set to true enable `--follow-tags` option by default. You
+ may override this configuration at time of push by specifying
+ `--no-follow-tags`.
+
+push.gpgSign::
+ May be set to a boolean value, or the string 'if-asked'. A true
+ value causes all pushes to be GPG signed, as if `--signed` is
+ passed to linkgit:git-push[1]. The string 'if-asked' causes
+ pushes to be signed if the server supports it, as if
+ `--signed=if-asked` is passed to 'git push'. A false value may
+ override a value from a lower-priority config file. An explicit
+ command-line flag always overrides this config option.
+
+push.pushOption::
+ When no `--push-option=<option>` argument is given from the
+ command line, `git push` behaves as if each <value> of
+ this variable is given as `--push-option=<value>`.
++
+This is a multi-valued variable, and an empty value can be used in a
+higher priority configuration file (e.g. `.git/config` in a
+repository) to clear the values inherited from a lower priority
+configuration files (e.g. `$HOME/.gitconfig`).
++
+--
+
+Example:
+
+/etc/gitconfig
+ push.pushoption = a
+ push.pushoption = b
+
+~/.gitconfig
+ push.pushoption = c
+
+repo/.git/config
+ push.pushoption =
+ push.pushoption = b
+
+This will result in only b (a and c are cleared).
+
+--
+
+push.recurseSubmodules::
+ Make sure all submodule commits used by the revisions to be pushed
+ are available on a remote-tracking branch. If the value is 'check'
+ then Git will verify that all submodule commits that changed in the
+ revisions to be pushed are available on at least one remote of the
+ submodule. If any commits are missing, the push will be aborted and
+ exit with non-zero status. If the value is 'on-demand' then all
+ submodules that changed in the revisions to be pushed will be
+ pushed. If on-demand was not able to push all necessary revisions
+ it will also be aborted and exit with non-zero status. If the value
+ is 'no' then default behavior of ignoring submodules when pushing
+ is retained. You may override this configuration at time of push by
+ specifying '--recurse-submodules=check|on-demand|no'.
--
2.19.0.rc0.335.ga73d156e9c
