#x27;s a way to do this, let me know.
> >>
> >> Apart from the delay, glad that this is of course still HA ;)
> >>
> >> Cheers,
> >> James
> >> @purpleidea (twitter/irc)
> >> https://ttboj.wordpress.com/
> >>
> >>
> >&g
Hi all,
I found this article while browsing the Internet.
A good introductory article on how to set up glusterfs using raspberry pi.
http://www.linuxjournal.com/content/two-pi-r?page=0,0
--
Sharuzzaman Ahmat Raslan
___
Gluster-users mailing list
.
On Wed, Jan 8, 2014 at 10:48 AM, Sharuzzaman Ahmat Raslan <
sharuzza...@gmail.com> wrote:
> Hi all,
>
> I have not tested this yet, but would like to get your comment.
>
> I have a customer that is currently running BackupPC system, and the local
> disk is steadily going
> Gluster-users mailing list
> Gluster-users@gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
--
Sharuzzaman Ahmat Raslan
___
Gluster-users mailing list
Gluster-users@gluster.org
http://supercolony.gluster.org/mailman/listinfo/gluster-users
This would help better integrate and test Gluster within CentOS, and
> hopefully can contribute the improvement back to Fedora/RHEL, and also
> provide a supported platform that consumer can rely on.
>
> Ideas/suggestion?
>
> --
> Sharuzzaman Ahmat Raslan
>
> _____
help better integrate and test Gluster within CentOS, and
hopefully can contribute the improvement back to Fedora/RHEL, and also
provide a supported platform that consumer can rely on.
Ideas/suggestion?
--
Sharuzzaman Ahmat Raslan
___
Gluster-users ma
brick in node2 (p1n2,p2n2), and 1 brick in node3
(p1n3).
The question is, how to change from replicated system (p1n1-p1n2), to
distributed-replicated [(p1n1-p1n2)(p2n2-p1n3)] in a running system?
Ideas?
Thanks.
--
Sharuzzaman Ahmat Raslan
___
Gluste
ong: (33.642025,-117.844414) (paste into Google Maps)
>
> ---
>
>
>
> ___________
> Gluster-users mailing list
> Gluster-users@gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
--
Sharuzzaman Ahmat Raslan
___
Gluster-users mailing list
Gluster-users@gluster.org
http://supercolony.gluster.org/mailman/listinfo/gluster-users
> Gluster-users mailing list
> Gluster-users@gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
--
Sharuzzaman Ahmat Raslan
___
Gluster-users mailing list
Gluster-users@gluster.org
http://supercolony.gluster.org/mailman/listinfo/gluster-users
Maybe you could try Opendedup. Their SDFS support extended file attributes
http://www.opendedup.org/administrators-guide#extend
On Tue, Dec 3, 2013 at 11:59 PM, Sharuzzaman Ahmat Raslan <
sharuzza...@gmail.com> wrote:
> Reply on the comment tells that lessfs did not support extended
gt;
>>
>> --
>>
>> Gluster-users mailing list
>> Gluster-users@gluster.org
>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>
>>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brev
>
> On Sun, Nov 24, 2013 at 6:13 PM, Sharuzzaman Ahmat Raslan <
> sharuzza...@gmail.com> wrote:
>
>> Hi all,
>>
>> I'm following this thread, and found that this corner case (32 bit client
>> connecting to 64 bit cluster) will cause this issue, as inte
Hi all,
I'm following this thread, and found that this corner case (32 bit client
connecting to 64 bit cluster) will cause this issue, as interesting.
Is there anywhere we can document this problem, or at least in a
step-by-step procedure of troubleshooting?
Example:
If you are running a 32 bit
d the cluster will re-assembled
themselves?
Thanks.
On Thu, Nov 21, 2013 at 6:02 PM, Marcus Bointon
wrote:
> On 21 Nov 2013, at 10:42, Sharuzzaman Ahmat Raslan
> wrote:
>
> I would like to implement Gluster system for my customer, but this
> customer have one big issue.
>
filesystem error, and it corrupts the data?
Should I wipe the disk clean, then add to the cluster?
Appreciate ideas on basic recovery technique if all the node is down at the
same time.
Thanks.
--
Sharuzzaman Ahmat Raslan
___
Gluster-users mailing
15 matches
Mail list logo