Le 01/12/2016 à 13:12, Yannick Perret a écrit :
Hello,
I have a client machine that mounts as NFS a replicate x2 volume.
Practicaly this is configured with automount such as:
DIR-NAME -rw,soft,intr server1,server2:/VOLUME
Gluster servers are using 3.6.7.
Sometimes the NFS blocks on client
Hello,
I have a client machine that mounts as NFS a replicate x2 volume.
Practicaly this is configured with automount such as:
DIR-NAME -rw,soft,intr server1,server2:/VOLUME
Gluster servers are using 3.6.7.
Sometimes the NFS blocks on client with
server server2 not responding, timed out (here
Hello,
some times ago it was reported that 'configure' failed (at least on some
distro) on 3.8.1 from official .tgz (see
https://www.gluster.org/pipermail/gluster-users.old/2016-August/027835.html
for corresponding discussion).
The solution is simple: calling ./autogen.sh before solved to pro
ncreasing for (here) read ops until reaching all
mem/swap, using the fuse client.
Regards,
--
Y.
Le 02/08/2016 à 19:15, Yannick Perret a écrit :
In order to prevent too many swap usage I removed swap on this machine
(swapoff -a).
Memory usage was still growing.
After that I started an other progr
Le 04/08/2016 à 18:13, Yannick Perret a écrit :
Le 04/08/2016 à 17:39, Niels de Vos a écrit :
On Thu, Aug 04, 2016 at 05:13:40PM +0200, Yannick Perret wrote:
Le 03/08/2016 à 17:01, Kaleb S. KEITHLEY a écrit :
On 08/03/2016 10:42 AM, Yannick Perret wrote:
Le 03/08/2016 à 15:33, Amudhan P a
Le 04/08/2016 à 17:39, Niels de Vos a écrit :
On Thu, Aug 04, 2016 at 05:13:40PM +0200, Yannick Perret wrote:
Le 03/08/2016 à 17:01, Kaleb S. KEITHLEY a écrit :
On 08/03/2016 10:42 AM, Yannick Perret wrote:
Le 03/08/2016 à 15:33, Amudhan P a écrit :
Hi,
I am trying to install gluster 3.8.1
Le 03/08/2016 à 17:01, Kaleb S. KEITHLEY a écrit :
On 08/03/2016 10:42 AM, Yannick Perret wrote:
Le 03/08/2016 à 15:33, Amudhan P a écrit :
Hi,
I am trying to install gluster 3.8.1 from tarball in Ubuntu 14.04.
1. when i run "./configure --disable-tiering" at the end showing msg
Le 03/08/2016 à 15:33, Amudhan P a écrit :
Hi,
I am trying to install gluster 3.8.1 from tarball in Ubuntu 14.04.
1. when i run "./configure --disable-tiering" at the end showing msg
configure: WARNING: cache variable ac_cv_build contains a newline
configure: WARNING: cache variable ac_cv_host
RAM
[1246854.291909] 0 pages HighMem/MovableOnly
[1246854.291909] 14555 pages reserved
[1246854.291910] 0 pages hwpoisoned
Regards,
--
Y.
Le 02/08/2016 à 17:00, Yannick Perret a écrit :
So here are the dumps, gzip'ed.
What I did:
1. mounting the volume, removing all its content, umounting
#x27;ll be in hollidays at the end of this week for 3
weeks so I will mostly not be able to perform tests during this time
(network connection is too bad where I go).
Regards,
--
Y.
Le 02/08/2016 à 05:11, Pranith Kumar Karampuri a écrit :
On Mon, Aug 1, 2016 at 3:40 PM, Yannick Perret
mai
Le 02/08/2016 à 05:11, Pranith Kumar Karampuri a écrit :
On Mon, Aug 1, 2016 at 3:40 PM, Yannick Perret
mailto:yannick.per...@liris.cnrs.fr>>
wrote:
Le 29/07/2016 à 18:39, Pranith Kumar Karampuri a écrit :
On Fri, Jul 29, 2016 at 2:26 PM, Yannick Perret
mailto:yanni
Le 29/07/2016 à 18:39, Pranith Kumar Karampuri a écrit :
On Fri, Jul 29, 2016 at 2:26 PM, Yannick Perret
mailto:yannick.per...@liris.cnrs.fr>>
wrote:
Ok, last try:
after investigating more versions I found that FUSE client leaks
memory on all of them.
I tested:
-
Le 29/07/2016 20:27, Pranith Kumar Karampuri a écrit :
On Fri, Jul 29, 2016 at 10:09 PM, Pranith Kumar Karampuri
mailto:pkara...@redhat.com>> wrote:
On Fri, Jul 29, 2016 at 2:26 PM, Yannick Perret
mailto:yannick.per...@liris.cnrs.fr>> wrote:
Ok, last try:
Ok, last try:
after investigating more versions I found that FUSE client leaks memory
on all of them.
I tested:
- 3.6.7 client on debian 7 32bit and on debian 8 64bit (with 3.6.7
serveurs on debian 8 64bit)
- 3.6.9 client on debian 7 32bit and on debian 8 64bit (with 3.6.7
serveurs on debian 8
Any help/clues about that?
BTW I saw that used memory increase when performing ls -lR but not when
performing ls -R.
This problem prevent us to use glusterfs client.
Regards,
--
Y.
Le 25/07/2016 16:08, Yannick Perret a écrit :
Hello,
checking for related problems in bugreports I found this
y help would be appreciated has it prevent us to use FUSE mount.
Regards,
--
Y.
Le 22/07/2016 14:06, Yannick Perret a écrit :
Hello,
some times ago I posted about a memory leak in client process, but it
was on a very old 32bit machine (both kernel and OS) and I don't found
evidences about a si
Le 22/07/2016 21:12, Yannick Perret a écrit :
Le 22/07/2016 17:47, Mykola Ulianytskyi a écrit :
Hi
3.7 clients are not compatible with 3.6 servers
Can you provide more info?
I use some 3.7 clients with 3.6 servers and don't see issues.
Well,
with client 3.7.13 compiled on the
: no
firewalld-config : no
Regards,
--
Y.
Thank you
--
With best regards,
Mykola
On Fri, Jul 22, 2016 at 4:31 PM, Yannick Perret
wrote:
Note: I'm have a dev client machine so I can perform tests or recompile
glusterfs client if it can helps getting data about that.
I did not test
e with 3.6 servers (as far as I can see from my tests).
--
Y.
Le 22/07/2016 14:06, Yannick Perret a écrit :
Hello,
some times ago I posted about a memory leak in client process, but it
was on a very old 32bit machine (both kernel and OS) and I don't found
evidences about a similar proble
Hello,
some times ago I posted about a memory leak in client process, but it
was on a very old 32bit machine (both kernel and OS) and I don't found
evidences about a similar problem on our recent machines.
But I performed more tests and I have the same problem.
Clients are 64bit Debian 8.2 mac
Hello,
just a note to give feedback on a known problem:
I have 2 replica servers and for some reasons I use NFS mounts on one of
my clients (because it is an old one with which I have troubles with
glusterfs native client).
I managed to performs NFS mounts from on of the servers but failed on
t
Le 10/06/2016 13:08, Mohammed Rafi K C a écrit :
On 06/10/2016 02:41 PM, Yannick Perret wrote:
I get no feedback on that but I think I found the problem:
the glusterfs client grows on memory until no memory available and
them it crashes.
If we you can take a statedump (kill -SIGUSR1
ys-log-level WARNING) which is fine for me.
But maybe WARNING should be the default log level, at least for clients,
no? In production getting 3 lines per created directory is useless, and
anyone who wants to analyze a problem will switch to INFO or DEBUG.
Regards,
--
Y.
Le 08/06/2016 17:35, Ya
Hello,
I have a replica 2 volume managed on 2 identical server, using 3.6.7
version of gluster. Here is the volume info:
Volume Name: HOME-LIRIS
Type: Replicate
Volume ID: 47b4b856-371b-4b8c-8baa-2b7c32d7bb23
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: sto1.m
Hello,
we have some replica-2 volumes and it works fine at this time.
For some of the volumes I need to setup daily incremental blackups (on
an other filesystem, which don't needs to be on glusterfs).
As 'rsync' or similar is not very efficient on glusterfs volumes I tried
to use direct rsync
a new local value to client config without
umount/mount may be usefull.
--
Y.
HTH,
Krutika
On Fri, Mar 4, 2016 at 5:59 PM, Yannick Perret
mailto:yannick.per...@liris.cnrs.fr>>
wrote:
Le 04/03/2016 13:12, Krutika Dhananjay a écrit :
You could configure read-subvolume for
using something like 'mount -o
"remount,xlator-option=*replicate*.read-subvolume-index=X" …' will allow
the client to point to the new target without stopping volume
availability for clients?
--
Y.
-Krutika
-----------
as under heavy load from one server you could fall onto the other
one. Our purpose is really to reduce bandwidth beetween buildings when
possible, not to use the faster server :)
--
Y.
-Krutika
----
*From: *"
Le 03/03/2016 15:17, Saravanakumar Arumugam a écrit :
On 03/03/2016 05:38 PM, Yannick Perret wrote:
Hello,
I can't find if it is possible to set a prefered server on a
per-client basis for replica volumes, so I ask the question here.
The context: we have 2 storage servers, each i
*From: *"Yannick Perret"
*To: *"Krutika Dhananjay"
*Cc: *gluster-users@gluster.org
*Sent: *Thursday, March 3, 2016 7:23:09 PM
*Subject: *Re: [Gluster-users] Per-client prefered server?
Le 03/03/2016 13:18, Krutika Dhananjay a écrit :
What does &quo
nes in the other building are rooted via some more equipments.
--
Y.
-Krutika
*From: *"Yannick Perret"
*To: *gluster-users@gluster.org
*Sent: *Thursday, March 3, 2016 5:38:33 PM
*Subject: *[Glust
Hello,
I can't find if it is possible to set a prefered server on a per-client
basis for replica volumes, so I ask the question here.
The context: we have 2 storage servers, each in one building. We also
have several virtual machines on each building, and they can migrate
from one building t
Le 07/12/2015 11:32, Kaushal M a écrit :
On Mon, Dec 7, 2015 at 2:55 PM, Yannick Perret
wrote:
Hello,
I'm having problems with glusterfs and server/server encryption.
I have 2 servers (sto1 & sto2) with latest stable version (3.6.7-1 from
gluster repo) on Debian 8.2 (amd64), with o
Hello,
I'm having problems with glusterfs and server/server encryption.
I have 2 servers (sto1 & sto2) with latest stable version (3.6.7-1 from
gluster repo) on Debian 8.2 (amd64), with one single volume with
replication.
Without /var/lib/glusterd/secure-access all works as expected.
Then I
34 matches
Mail list logo
