I have never seen it behave this way, in MacOS / Linux / Win10 I always get
a popup and if I so choose I can click the checkbox to display the txns
just created which are listed in a new register tab. The txns themself
always show up immediately in their appropriate register which is usually
one o
This thought sounds like a prospect.
On Sat, Feb 6, 2021 at 3:28 PM David Carlson
wrote:
> Now that I have let this issue germinate and grow for a while, I am
> wondering if the issue in the previous thread and possibly discussed in
> this thread too regarding transactions not appearing in thei
Now that I have let this issue germinate and grow for a while, I am
wondering if the issue in the previous thread and possibly discussed in
this thread too regarding transactions not appearing in their respective
registers when created applies to transactions configured to be created
without displ
Popup? I am starting to set up 4.4 in Windows and it just ran SLR.
After starting GnuCash the SLR started and presented the usual list of
transactions, two of which were already created and scads had reminder
status. I chose to show results but not to create any from reminders at
this time. I t
On 05 February 2021 at 20:05, Adrien Monteleone said:
> On 2/5/21 7:39 PM, David Carlson wrote>
> > I want to start with "... will tell me on start up
> > that it has created x number of scheduled txns. I can see the change in
> > value in the register but not the actual txn."
> >
> > Where does
For what it's worth, I tried to repro the problem, but failed to. So
it's probably a bit of a tricky bug :(
J.
On 2/5/21 6:45 PM, David Carlson wrote:
Adrien, thanks for your comments. I am a prolific user of SX's, I average
several per day. The transaction count would not appear in the SLR
Adrien, thanks for your comments. I am a prolific user of SX's, I average
several per day. The transaction count would not appear in the SLR dialog
unless it only counted the ones that had already happened when the dialog
appeared. Since most transactions appear only after being approved for
cre
On 2/5/21 7:39 PM, David Carlson wrote>
I want to start with "... will tell me on start up
that it has created x number of scheduled txns. I can see the change in
value in the register but not the actual txn."
Where does GnuCash display that number? I have never seen such a summary
transaction
First I agree that there is some mysterious behavior with scheduled
transactions but it is very hard to pin down the problem. I suspect that
only a step by step detailed log of what the GnuCash Since Last Run wizard
is doing would actually tell us what is wrong, but detailed descriptions
may help
I'm referring to the specific settings found in Edit of that scheduled
transaction.
On Fri, Feb 5, 2021 at 5:00 PM Adrien Monteleone <
adrien.montele...@lusfiber.net> wrote:
>
> On 2/5/21 4:15 PM, Jack Slater wrote:
> > This is my original post (at bottom of this thread)
> >
> > Today is 2/4/21.
Correct.
On Fri, Feb 5, 2021 at 4:55 PM Adrien Monteleone <
adrien.montele...@lusfiber.net> wrote:
> I don't think you are. I think we're talking about two different things.
>
> I agree, once fired, the transaction should be visible in the affected
> registers, presuming you don't have a filtered
On 2/5/21 4:15 PM, Jack Slater wrote:
This is my original post (at bottom of this thread)
Today is 2/4/21.
Transaction scheduled for the 5th of every month.
Looking at Scheduled Transactions, it reads Last Occurance 2/5/21.
Transaction options are set to Create Automatically and Create 3 days
I don't think you are. I think we're talking about two different things.
I agree, once fired, the transaction should be visible in the affected
registers, presuming you don't have a filtered view active that his
hiding it.
Regards,
Adrien
On 2/5/21 4:10 PM, Jack Slater wrote:
Why would I wa
I agree as well. I was replying specifically to Christina's post.
Perhaps I misread it.
You won't automatically see the transactions for review unless you have
it set up to both notify you and then click that checkbox.
But certainly even without notification or review, the transactions
shoul
Yep I sure get that and I'm all in to make it as good as it can be. Suffice
to say, the small functionality that I use for home finance is really
terrific and I s appreciate folks that contribute to the coding.
On Fri, Feb 5, 2021 at 4:20 PM Michael or Penny Novack <
stepbystepf...@comcast.net
On 2/5/2021 4:54 PM, Jack Slater wrote:
Interesting. Sure seems like a bug to me.
But that's why good to post HERE (in the users' help list). The FIRST
step is to confirm that there are other users who have scheduled
transactions and whether they have seen this behavior. If not, if
schedule
can't recall if this
> > started
> > >> occurring before the upgrade to 4.xx or not.
> > >>
> > >> Regards,
> > >> Christina
> > >>> Message: 1
> > >>> Date: Th
Agree.
On Fri, Feb 5, 2021 at 4:08 PM Jean Laroche wrote:
> But it's a bug that you have to go through these steps, right? (i.e.,
> that they don't show in the register unless you close GC then open it
> again).
>
> On 2/5/21 2:04 PM, Adrien Monteleone wrote:
> > Be sure for each transaction you
Message: 1
>>> Date: Thu, 4 Feb 2021 16:00:59 -0500
>>> From: "Derek Atkins" mailto:de...@ihtfp.com>>
>>> To: "Jack Slater" mailto:theillini...@gmail.com>>
>>> Cc: "John Ralls" mailto:jra...@cer
Why would I want to have to perform another task for a scheduled
transaction? Seems redundant to me. Better to fix the problem it seems to
me unless I'm totally missing something.
On Fri, Feb 5, 2021 at 4:05 PM Adrien Monteleone <
adrien.montele...@lusfiber.net> wrote:
> Be sure for each transact
;> Regards,
> >> Christina
> >>> Message: 1
> >>> Date: Thu, 4 Feb 2021 16:00:59 -0500
> >>> From: "Derek Atkins"
> >>> To: "Jack Slater"
> >>> Cc: "John Ralls" , gnucash-user@gnucash.org
>
But it's a bug that you have to go through these steps, right? (i.e.,
that they don't show in the register unless you close GC then open it
again).
On 2/5/21 2:04 PM, Adrien Monteleone wrote:
Be sure for each transaction you want to see, you have the 'Notify me
when created' check box marked.
Be sure for each transaction you want to see, you have the 'Notify me
when created' check box marked.
Then when the Since Last Run dialog pops up on starting GnuCash (or
manually run) there is a checkbox at the bottom of that window to
"Review created transactions". Check it, then click the OK
: Thu, 4 Feb 2021 16:00:59 -0500
From: "Derek Atkins"
To: "Jack Slater"
Cc: "John Ralls" , gnucash-user@gnucash.org
Subject: Re: [GNC] Scheduled Transaction Mystery?
Message-ID:
<19e311e6378fc91d60db8677af984288.squir...@mail2.ihtfp.org>
Content-Type: text/plai
py. Yes
> it's tiresome but it's working for me. I can't recall if this started
> occurring before the upgrade to 4.xx or not.
>
> Regards,
> Christina
> > Message: 1
> > Date: Thu, 4 Feb 2021 16:00:59 -0500
> > From: "Derek Atkins"
> > To:
Regards,
Christina
Message: 1
Date: Thu, 4 Feb 2021 16:00:59 -0500
From: "Derek Atkins"
To: "Jack Slater"
Cc: "John Ralls" , gnucash-user@gnucash.org
Subject: Re: [GNC] Scheduled Transaction Mystery?
Message-ID:
<19e311e6378fc91d60db8677af984288.squir...@mail2.ihtf
Grasping at straws here. Is there a possibility that your register view
has been filtered to not show future transactions?
On Thu, Feb 4, 2021, 4:24 PM Jack Slater wrote:
> No I don't but I don't see that as important. It should have been created
> regardless I would think.
>
> On Thu, Feb 4, 2
No I don't but I don't see that as important. It should have been created
regardless I would think.
On Thu, Feb 4, 2021 at 3:01 PM Derek Atkins wrote:
> Do you have the SX set up to notify you on creation? If not, it could
> create without telling you.
>
> -derek
>
>
> On Thu, February 4, 2021
Do you have the SX set up to notify you on creation? If not, it could
create without telling you.
-derek
On Thu, February 4, 2021 3:36 pm, Jack Slater wrote:
> Started it.
>
> Last Run Window did pop up and showed nothing. Closed it.
>
> No variables included.
>
> On Thu, Feb 4, 2021 at 2:11 PM
Started it.
Last Run Window did pop up and showed nothing. Closed it.
No variables included.
On Thu, Feb 4, 2021 at 2:11 PM John Ralls wrote:
> When you say you opened GnuCash, does that mean that you started it? Or
> has it been running since before 2 February and you switched to its window?
When you say you opened GnuCash, does that mean that you started it? Or has it
been running since before 2 February and you switched to its window?
If the former, when you started it for the first time did the Since Last Run
window come up, what did it say about that transaction, and what did yo
It should be listed in the register for sure regardless and I have not
deleted it. I simply opened GnuC and looked and its not there.
On Thu, Feb 4, 2021 at 12:42 PM Jean Laroche wrote:
> I think if you set it up to create x days in advance, when the
> transaction is created, the "last occurren
I think if you set it up to create x days in advance, when the
transaction is created, the "last occurrence" is set to the day of the
transaction (no to the day it was created). So that would explain why
you see "Last occurrence 2/5/21".
Is it possible that you somehow deleted the occurrence t
Today is 2/4/21.
Transaction scheduled for the 5th of every month.
Looking at Scheduled Transactions, it reads Last Occurance 2/5/21.
Transaction options are set to Create Automatically and Create 3 days in
advance.
No transaction listed in register.
Seems pretty illogical to me. What am I missing
34 matches
Mail list logo