Favor desuscribirme de esta lista, gracias
RODOLFO A. DEL PRADO QUIROZ
Arquitecto Universidad Nacional de Colombia
MSc en Medio Ambiente y Desarrollo
Profesional Universitario
Alcaldia de Medellín
Celular 3007794381
___
grass-user mailing list
grass-use
Hi,
On Thu, Dec 6, 2018 at 9:38 AM SHIVAM RAI wrote:
>
> Hi,
> please don't delay.
> please answer the question that i have asked recently
you still did not send which operating system you use. In another
email to me you stated that it is GRASS GIS 7.4.0.
> when executing "d.tile" and "d.what.r
Dear Shivam rai
There is no module called "d.tile", So it won't work.
What did you try with d.what.rast? Please post the command you tried !!
Regards
Sajid
On Thu, Dec 6, 2018 at 9:38 AM SHIVAM RAI wrote:
> Hi,
> please don't delay.
> please answer the question that i have asked recently
> wh
Hi
Please Reply Me
On Thu, Dec 6, 2018 at 2:07 PM SHIVAM RAI wrote:
> Hi,
> please don't delay.
> please answer the question that i have asked recently
> when executing "d.tile" and "d.what.rast" in console or cmd
> error: not implemented in the wxGUI. try to add as a layer command.
> thanks
>
_
Hi,
please don't delay.
please answer the question that i have asked recently
when executing "d.tile" and "d.what.rast" in console or cmd
error: not implemented in the wxGUI. try to add as a layer command.
thanks
___
grass-user mailing list
grass-user@li
I’ve tried unsuccessfully to add a satellite to the i.atcorr tool. I followed
the steps listed on the page, but I cannot get the actual integration of the
tool to work. I have all the needed information to add the tool. It’s for
Planet’s Dove satellites. Any help is greatly appreciated! (they h
Julita Dudek:
Hello,
Hello Julita,
I use i.atcorr modul, but I have one question:
- in the "run_i_atcorr(radiance_flag, input_band, input_range, elevation,
visibility, parameters, output, output_range)" party,
what is the input_range output_range, you take this from MTL.txt or from
Radiance
Hello,
I use i.atcorr modul, but I have one question:
- in the "run_i_atcorr(radiance_flag, input_band, input_range, elevation,
visibility, parameters, output, output_range)" party,
what is the input_range output_range, you take this from MTL.txt or from
Radiance min and max values, or you fixed
Thanks Anna, it worked!
On Fri, Aug 12, 2016 at 11:31 AM, Anna Petrášová
wrote:
> On Fri, Aug 12, 2016 at 1:05 PM, alassane toure wrote:
> > Group,
> > I am running a grass-python script but when i replace a variable argument
> > within the command the script does not work
> >
> > The follo
On Fri, Aug 12, 2016 at 1:05 PM, alassane toure wrote:
> Group,
> I am running a grass-python script but when i replace a variable argument
> within the command the script does not work
>
> The following works...
> grass.run_command('r.in.gdal',
> input='/home/alassane/Data/SanbornCD/tile/newc
Group,
I am running a grass-python script but when i replace a variable argument
within the command the script does not work
The following works...
grass.run_command('r.in.gdal', input='/home/alassane/Data/
SanbornCD/tile/newconstr_mask.tif', output='construction')
But not this...
command="'r
Hello,
I've tried to use r.surf.idw on a large raster. It works well in 6.4.4.
I've moved to 7.1 SVN, where everything is marvellous, at least what I use,
except r.surf.idw which creates the same output as the impot was.
I've also svn-ed and compiled 7.0.1, where r.surf.idw did the same.
Namely
On 2/9/13, Afsal Iqubal wrote:
> Hello
> i want to involve in grass gevelopment.i am a S4 B.Tech CS student. which
> version is prefered, grass gis from ubuntu repo or grass latest 7.0. How to
> build from source.
>
Please download the GRASS 7 source code from SVN trunk which is the
development
>How to build from source.
have a look in the wiki:
http://grasswiki.osgeo.org/wiki/Compile_and_Install
-
best regards
Helmut
--
View this message in context:
http://osgeo-org.1560.n6.nabble.com/no-subject-tp5033202p5033203.html
Sent from the Grass - Users mailing list archive at Nabble.c
Hello
i want to involve in grass gevelopment.i am a S4 B.Tech CS student. which
version is prefered, grass gis from ubuntu repo or grass latest 7.0. How to
build from source.
___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/
http://www.ganamossucaso.com/dfgqp.html___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
José wrote:
> I need to obtain this format from shapefile, how do I?
> ESRI ASCII Grid Format
r.out.arc
but shapefiles are vector data model and Arc ASCII grids are raster
data model, so you would have to translate between the two with
v.to.rast or v.out.ascii+r.in.xyz, or interpolate with v.sur
Hi,
I need to obtain this format from shapefile, how do I?
ESRI ASCII Grid Format
(Copied from the ArcWorkstation 8.3 Help File)
The ASCII file must consist of header information containing a set of
keywords, followed by cell values in row-major order. The file format is
http://dehradun.org.in/wp-content/plugins/extended-comment-options/02efpk.html";>
http://dehradun.org.in/wp-content/plugins/extended-comment-options/02efpk.html___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinf
Roger Bivand:
>I don't know how you you started the R session. I hope you started R within
>a running GRASS session, as you seem to be using an existing location.
in http://grass.osgeo.org/wiki/R_statistics#MS_Windows there are some hints
(Usage II) how you can start
R within a GRASS session in
Pedro Camilo Alcantara Concepcion
___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
Hi,
I'm running GRASS through the QGIS (v1.0.5) interface on Windows XP.
The GRASS folder in the QGIS installation says 'grass-6.4.0svn'.
I have a polygon layer with 22 polygons and a raster slope layer. When
I run v.rast.stats with these two layers, two of the polygons have
NULL values in the co
Hi,
>It's a return of an old bug. It was fixed 8 months a go.
>
>[http://trac.osgeo.org/grass/ticket/980]
>
>WinGRASS gurus - please change any other places where HTML browser is
>hardcoded to some ".exe" file. See ticket #980 for details.
>
>Maris.
I've fixed ticket 980 in all cases in the nsis-
On Fri Jan 29 2010 Rich wrote
>Matteo,
> I assume that you're using the wxPython UI for this.
> There are three distinct steps involved: 1) import the raster map; >2)
>indicate by the checkbox that you want the imported map added to the >list of
>loaded layers; 3) right-click on the layer(s
On Fri, 29 Jan 2010, Matteo Toro wrote:
I used the r.in.gdal to import the raster map, and then i pressed the
button add raster layer, to add the raster file. But anything
happened..the output says that everything matches but is not possible to
add any raster file and even to display it.
Matte
I used the r.in.gdal to import the raster map, and then i pressed the button
add raster layer, to add the raster file. But anything happened..the output
says that everything matches but is not possible to add any raster file and
even to display it.
__
dear all,
I have installed GRASS and QGIS on Fedora 11. The GRASS problem
is quoted as below. It gets the following message and once it has crashed too.
=
Starting GRASS ...
/usr/lib/python2.6/site-packages/wx-2.8-gtk2-unicode/wx/_core.py:14450:
UserWarning: wxPython/
Hamish wrote:
> Wim de Vries wrote:
>
>>> (v.5 on suse 10.3 as well as v.6.2 on debian lenny).
>>> I came to the point of defining a new location, but then the list for
>>> projections does not show Lambert conformal or mercator.
>>>
>
> it's there. lcc, merc, etc.
Ok.Thanks a lot. I'll have anoth
Markus,
Thanks for the feedback. The advice is very helpful. I've been slowly getting
used to GRASS but still have a way to go. If I can stick with it I hope to learn
enough to create a week-long "GRASS for conservation" workshop that we can offer
at our research station in southeastern Arizona an
On Mon, 2008-12-01 at 13:46 -0800, Avila Jose wrote:
> unsubscribe
>
>
> ¡Todo sobre Amor y Sexo!
> La guía completa para tu vida en Mujer de Hoy.
> http://mx.mujer.yahoo.com/
> ___
> grass-user mailing list
> grass-user@lis
unsubscribe
¡Todo sobre Amor y Sexo!
La guía completa para tu vida en Mujer de Hoy.
http://mx.mujer.yahoo.com/
___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
Can your CAD system read shapefiles?
Mark
~ iPhone'd
On Sep 29, 2008, at 3:33 AM, "Patrick Schirmer" <[EMAIL PROTECTED]>
wrote:
Dear GRASS-users,
does someone of you know how to export a GRASS-polygone layer to CAD
polygones?
I used GRASS6.3.0 to create closed polygones from a 'unclea
Dear GRASS-users,
does someone of you know how to export a GRASS-polygone layer to CAD polygones?
I used GRASS6.3.0 to create closed polygones from a 'unclean' dwg file and want
to export this GIS-file to go on drawing within a CAD-programm (we're an
architecure/urban planner office and my col
Dear GRASS users,
could somebody help me to find some solution for the following task?
I have a raster map representing many distinct areas (MAP_1) and a second int
raster with specific values (MAP_2). The result map should contain the same
areas of MAP_1 but with the max MAP_2 value of each area
Hi Dylan,
It looks like r.param.scale is the module he's looking for...thanks!
Bob
> -Original Message-
> From: Dylan Beaudette [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 03, 2008 2:32 PM
> To: grass-user@lists.osgeo.org
> Cc: Moskovitz, Bob
> Subject: Re: [
Hi Bob,
Have a look at r.param.scale -- this module allows you to specify the window
size.
Cheers,
Dylan
On Tuesday 03 June 2008, Moskovitz, Bob wrote:
> Hello list,
>
> A coworker was asking me if I know of a slope curvature algorithm that lets
> you adjust the kernel size. Does GRASS have s
Hello list,
A coworker was asking me if I know of a slope curvature algorithm that lets you
adjust the kernel size. Does GRASS have such a program?
Bob
Bob Moskovitz
Seismic Hazard Zonation Project
California Geological Survey
http://www.conservation.ca.gov/cgs/shzp
CONFIDENTIALITY NOTICE
Lukas Rohrer wrote:
Hello and thanks for your input
Is it possible to draw a Profile based on a digital hight model and a
selectet line?
Sincerely Lukas
--
--
Arbeit:
Tel: +41 44 632 55 98
ETH Zürich
Institut für terrestrische Ökosysteme
Professur Waldökologie
Universitätstrasse 22
CH-8092 Zür
Lukas Rohrer schrieb:
Hello and thanks for your input
Is it possible to draw a Profile based on a digital hight model and a
selectet line?
Sincerely Lukas
Griazi wohl,
please use a subject next time ;o)
You could also try d.profile
the plotfile-parameter outputs the line-coordinates
chee
Lukas Rohrer wrote:
> Is it possible to draw a Profile based on a digital hight model and a
> selectet line?
sure, see r.profile and r.transect modules.
If your line is already a vector line and not just a collection of
coordinates, you could use 'v.out.ascii format=standard' first to get
the li
Hello and thanks for your input
Is it possible to draw a Profile based on a digital hight model and a
selectet line?
Sincerely Lukas
--
--
Arbeit:
Tel: +41 44 632 55 98
ETH Zürich
Institut für terrestrische Ökosysteme
Professur Waldökologie
Universitätstrasse 22
CH-8092 Zürich
privat:
Lukas Rohr
> Most of GRASS' performance issues arise from the fact that code
> simplicity takes precedence over perfomance.
I can't imagine how much faster could be GRASS! I mean, it's faster than
most other GIS tools... so if "performance programing" would be
mandatory for "core modules" then it would ...fl
Nikos Alexandris wrote:
> I am curious if any of you experienced developers has ever thought about
> using GPU as a CPU (or Co-CPU) in order to boost calculation speed... ?
> Is it or is not possible?
Most of GRASS' performance issues arise from the fact that code
simplicity takes precedence ove
I am curious if any of you experienced developers has ever thought about
using GPU as a CPU (or Co-CPU) in order to boost calculation speed... ?
Is it or is not possible?
http://www.gpgpu.org/
Cheers,
Nikos
signature.asc
Description: This is a digitally signed message part
___
On Jan 11, 2008, at 6:04 AM, [EMAIL PROTECTED] wrote:
Date: Fri, 11 Jan 2008 04:42:49 -0800 (PST)
From: Craig Leat <[EMAIL PROTECTED]>
Subject: [GRASS-user] v.in.ogr fails on dbf with long column names
To: grass-user@lists.osgeo.org
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; char
hi,
after doing d.path i get following results:
: Costs on the network = 8051.103402
Distance to the network = 150.616523, distance from the network = 32.915489
can you tell me what dose this signifies, or from where i can get the basics of
the calculation it >
Thank you,
jainita
___
hi,
can anyone tell that whether i can add rivers and trees on the road map for
finding shortest path___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
Hi!
You can use the "cs2cs" command to transform point fron one
coord.syst.
to another. Check then man(ual) for syntax details.
On Wed, 28 Nov 2007 16:34:57 +0530
[EMAIL PROTECTED] wrote:
> hi,
> I am working on grass6.3 and i want to transform the
> co-ordinates form UTM to Lat-Long
> for th
hi,
I am working on grass6.3 and i want to transform the co-ordinates form UTM to
Lat-Long
for this i used the command v.transform but the map comes upside down.so can
anyone tell me what to do
secondly i want to extract the layer of DGN map.I am able to extract
individuakl layers but say if i
U have to specify the unit as sq.m or just sq m before entering lat/long value
--
Puja Basu
___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
--
Puja Basu
___
grass-user mailing list
grass-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/grass-user
51 matches
Mail list logo
