Hi,
Vincent Legoll skribis:
> On 13/04/2020 12:50, Ludovic Courtès wrote:
>> What changes are you referring to? (Sorry, I’m getting lost!)
>
> This: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=40601
Oh nice. I don’t think that’ll make it into 1.1.0 but it’s a welcome
addition!
Ludo’.
On Fri, Apr 10, 2020 at 04:47:44PM +0200, pelzflorian (Florian Pelz) wrote:
> On Fri, Apr 10, 2020 at 04:35:18PM +0200, pelzflorian (Florian Pelz) wrote:
> > On Fri, Apr 10, 2020 at 03:56:21AM +0200, pelzflorian (Florian Pelz) wrote:
> > > For me the Guix System installer crashes reproducibly after
Hello,
On 13/04/2020 12:50, Ludovic Courtès wrote:
What changes are you referring to? (Sorry, I’m getting lost!)
This: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=40601
--
Vincent Legoll
Thanks again,
On 13/04/2020 12:50, Ludovic Courtès wrote:
The ‘guix-binary.x86_64-linux.tar.xz’ makefile target runs:
guix pack guix …
So you would first need to update the ‘guix’ package, using:
make update-guix-package
and committing the result.
What about the patch here:
http://deb
Hello,
On 13/04/2020 12:50, Ludovic Courtès wrote:
Hi Vincent,
Vincent Legoll skribis:
BTW, how would I test that (modified guix-install + nix/local.mk) ?
I've modified guix-install to handle runit-based distros (for void
linux) and nix/local.mk, like in the sysv-init enablement Danny
submi
Hi Vincent,
Vincent Legoll skribis:
> BTW, how would I test that (modified guix-install + nix/local.mk) ?
>
> I've modified guix-install to handle runit-based distros (for void
> linux) and nix/local.mk, like in the sysv-init enablement Danny
> submitted lately.
>
> I've seen the rebuild instruc
Hello,
On Sun, Apr 12, 2020 at 12:26 AM Ludovic Courtès wrote:
> Did you use ‘guix-install.sh’ (modified) or did you install it manually?
I used a modified guix-install.sh for the void testing (I'll submit
the modifications) but not for the others. I'll do future testing
with it, as it is the re
Hi Vincent,
Vincent Legoll skribis:
> I tested the 1.1.0rc1 binary with the following commands:
>
> 1) guix search hello
> 2) guix show hello
> 3) guix build hello
> 4) guix gc -D /gnu/store/*hello*
> 5) guix build --no-substitutes hello
> 6) guix gc
>
> On the following foreign distros:
>
> i68
alex sassmannshausen writes:
> Heya
>
> On Sat, 11 Apr 2020, 00:38 Ludovic Courtès, wrote:
>
>> Hi Alex,
>>
>> Alex Sassmannshausen skribis:
>>
>> > After successfully completing system setup from the ISO using that
>> > selection, rebooting the system launches GDM OK. Signing in to GDM
>> > h
Hello,
I tested the 1.1.0rc1 binary with the following commands:
1) guix search hello
2) guix show hello
3) guix build hello
4) guix gc -D /gnu/store/*hello*
5) guix build --no-substitutes hello
6) guix gc
On the following foreign distros:
i686 void 20191109 (glibc) (qemu / kvm) (*)
x86-64 debi
Heya
On Sat, 11 Apr 2020, 00:38 Ludovic Courtès, wrote:
> Hi Alex,
>
> Alex Sassmannshausen skribis:
>
> > After successfully completing system setup from the ISO using that
> > selection, rebooting the system launches GDM OK. Signing in to GDM
> > however causes the system to loop back to GDM
Hi Alex,
Alex Sassmannshausen skribis:
> After successfully completing system setup from the ISO using that
> selection, rebooting the system launches GDM OK. Signing in to GDM
> however causes the system to loop back to GDM, instead of starting a
> ratpoison session. It is not clear to me wha
Heya
Ludovic Courtès writes:
> Hi!
>
> Mathieu Othacehe skribis:
>
>>> * Esperanto language/layout crashes the installer.
>>
>> Fixed by 1a24df44347629cd67821d672edad7636404f293 on master.
>>
>> Ludo, you may want to cherry-pick it to 1.1.0 branch :)
>
> Done!
>
> Thanks for testing & fixing, c
Hello,
A minor useability issue:
At the end of installation, a prompt suggests installation is complete
and that the system is ready for reboot.
However, it suggests one can remove the installation medium before
hitting return to restart.
For me at least, removing the pendrive prior to reboot c
Hello!
I have spotted a further issue — though I'm not sure whether this thread
is the right place to report it:
One is able to select ratpoison as the only option in the desktop
environment options in the installer.
After successfully completing system setup from the ISO using that
selection, r
On Fri, Apr 10, 2020 at 04:35:18PM +0200, pelzflorian (Florian Pelz) wrote:
> On Fri, Apr 10, 2020 at 03:56:21AM +0200, pelzflorian (Florian Pelz) wrote:
> > For me the Guix System installer crashes reproducibly after manual
> > partitioning, even when not formatting the partition. The ESP and
> >
Hi!
Mathieu Othacehe skribis:
>> * Esperanto language/layout crashes the installer.
>
> Fixed by 1a24df44347629cd67821d672edad7636404f293 on master.
>
> Ludo, you may want to cherry-pick it to 1.1.0 branch :)
Done!
Thanks for testing & fixing, comrades!
Ludo’.
> * Esperanto language/layout crashes the installer.
Fixed by 1a24df44347629cd67821d672edad7636404f293 on master.
Ludo, you may want to cherry-pick it to 1.1.0 branch :)
Mathieu
Great, thank you for that summary, I think that is right.
I've noticed a further (small?) error:
On installation completion an error flashes up. When I checked
/var/log/debug, the message is:
…localhost shepherd[1]: system-error("rmdir" "~A" ("Directory not empty") (39))
Best wishes,
Alex
Ma
Hi Mathieu,
Thanks for getting back to me!
Mathieu Othacehe writes:
> Hello Alex,
>
> Thanks for your feedback!
>
>> Then the screen flashes back to the beginning of the installer. Running
>> through the process again results in the disk drive not being available
>> for partitioning.
>
> Are y
> As the system language & locale rather than
> - Esperanto
I can reproduce it in QEMU. So there are two issues here:
* Esperanto language/layout crashes the installer.
* When the installer crashes, `umount-cow-store' is not called and the next
installation is bound to fail because some mount
I have been able to avoid this error by selecting:
- English
- United Kingdom
As the system language & locale rather than
- Esperanto
which I had previously selected.
I tried a great number of combinations of configurations, and this seems
to have been the one thing that reliably crashed (when
Hello Florian,
> For me the Guix System installer crashes reproducibly after manual
> partitioning, even when not formatting the partition. The ESP and
> root partition have not been deleted (no matter if I tell the
> installer to format them or not). This applies to EFI installation on
> my 2
Hello Alex,
Thanks for your feedback!
> Then the screen flashes back to the beginning of the installer. Running
> through the process again results in the disk drive not being available
> for partitioning.
Are you running the installer on a VM or on real hardware? Could you try
the following
Hello,
Running the graphical installer from the installation image hosted
through IPFS, I can report the following experience:
The guidance, keyboard configuration & partitioning works well. In fact
all goes charmingly until the stage where the sysconf is shown. That
looks correct too.
Hitting
Hi,
"pelzflorian (Florian Pelz)" skribis:
> For me the Guix System installer crashes reproducibly after manual
> partitioning, even when not formatting the partition. The ESP and
> root partition have not been deleted (no matter if I tell the
> installer to format them or not). This applies to
Hi Vagrant,
Vagrant Cascadian skribis:
> On 2020-04-09, Ludovic Courtès wrote:
>> Hello Guix!
>>
>> I’ve run “make release” from the new ‘version-1.1.0’ branch and uploaded
>> the result:
>>
>> https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc1
>
> The only tarball I see there is:
>
>
> ht
On 2020-04-09, Ludovic Courtès wrote:
> Hello Guix!
>
> I’ve run “make release” from the new ‘version-1.1.0’ branch and uploaded
> the result:
>
> https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc1
The only tarball I see there is:
https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc1/guix-1.0
On Thu, Apr 09, 2020 at 10:51:49PM +0200, Ludovic Courtès wrote:
> If everything goes well, we can publish the release on Monday, 13th,
> with few or no changes beyond translation updates on the ‘version-1.1.0’
> branch.
For me the Guix System installer crashes reproducibly after manual
partition
Hi Ludo,
nice!
On Thu, 09 Apr 2020 22:51:49 +0200
Ludovic Courtès wrote:
> guix install ipfs
guix install go-ipfs ? :)
> ipfs daemon &
Error: no IPFS repo found in /home/dannym/.ipfs.
please run: 'ipfs init'
After invoking that, ipfs daemon works.
pgpSuwfUh8TcV.pgp
Description: OpenPGP di
Hello Guix!
I’ve run “make release” from the new ‘version-1.1.0’ branch and uploaded
the result:
https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc1
Alternately (and preferably), you can get it over IPFS:
guix install ipfs
ipfs daemon &
ipfs ls QmXpSUnppJgf23LpaKJzRWJbQxwEfybJy9VxF79iTL
31 matches
Mail list logo
