n-vps 127.0.0.1:443 check inter 2000
>>
>>
>> - Then start haproxy (it will do healthchecks to port 443)
>> - change server banaan-vps 127.0.0.1:443 check inter 2000 to server
>> banaan-vps 127.0.0.1:80 check inter 2000
>> - save the state using /bin/sh -c "e
den:* donderdag 12 juli 2018 14:52:24
> *Aan:* Sven Wiltink
> *CC:* haproxy@formilux.org
> *Onderwerp:* Re: haproxy bug: healthcheck not passing after port change
> when statefile is enabled
>
> Hi Sven,
>
> Thanks for the clarification.
> It's a bit more complicated than wha
2018 14:52:24
Aan: Sven Wiltink
CC: haproxy@formilux.org
Onderwerp: Re: haproxy bug: healthcheck not passing after port change when
statefile is enabled
Hi Sven,
Thanks for the clarification.
It's a bit more complicated than what it is supposed to be.
I think we may want to apply the port only
it will start healthchecks
> for port 80 as expected
>
> -Sven
>
>
>
>
>
>
> ------
> *Van:* Baptiste
> *Verzonden:* dinsdag 3 juli 2018 11:38:14
> *Aan:* Sven Wiltink
> *CC:* haproxy@formilux.org
> *Onderwerp:* Re: haproxy bug:
e when the ports don't match.
-Sven
Van: Sven Wiltink
Verzonden: dinsdag 12 juni 2018 17:01:18
Aan: haproxy@formilux.org<mailto:haproxy@formilux.org>
Onderwerp: haproxy bug: healthcheck not passing after port change when
statefile is enabled
Hello,
There seems to be a bug in
on't match.
>
>
> -Sven
>
>
>
> --
> *Van:* Sven Wiltink
> *Verzonden:* dinsdag 12 juni 2018 17:01:18
> *Aan:* haproxy@formilux.org
> *Onderwerp:* haproxy bug: healthcheck not passing after port change when
> statefile is e
don't match.
-Sven
Van: Sven Wiltink
Verzonden: dinsdag 12 juni 2018 17:01:18
Aan: haproxy@formilux.org
Onderwerp: haproxy bug: healthcheck not passing after port change when
statefile is enabled
Hello,
There seems to be a bug in the loading of state fil
Sven,
Am 12.06.2018 um 17:01 schrieb Sven Wiltink:
> create a systemd file
> /etc/systemd/system/haproxy.service.d/60-haproxy-server_state.conf with the
> following contents:
> [Service]
> ExecStartPre=/bin/mkdir -p /var/run/haproxy/state
> ExecReload=
> ExecReload=/usr/sbin/haproxy -f ${CONFIG
Hello,
There seems to be a bug in the loading of state files after a configuration
change. When changing the destination port of a server the healthchecks never
start passing if the state before the reload was down. This bug has been
introduced after 1.7.9 as we cannot reproduce it on machines
9 matches
Mail list logo
