Hi Paula
I do not believe that RTU Abs really exist. No company can produce an antibody
that is suitable for use by all laboratories taking in to consideration how
tissue can be handled differently from lab to lab. I have used many RTU Abs
which I have had to dilute to get optimal staining
Hi Christine
You have had some good suggestions to date.
Also to consider if you are using the Peloris racks with the individual spaces
for cassettes I have seen this happen when cassettes are inserted into the
racks. As most people load cassettes with the patient details facing up, if
Hi Loralee
Try a butcher's supply store. They sell devices they use for vacuum packing
meat. By removing the air from the bag the evaporation of formalin is almost
zero and the specimens will remain intact for many years. The bags are also
more hardy than those sold with basic bag sealers.
Hi Andrew
I have not used that model cryostat so this may not be the answer but I have
experienced this on other cryostats when the microtome has been removed for
cleaning and decontamination and reinstalled with the handle in the incorrect
position resulting in the counterweight being
Hi Annie
If you look up this article or many others like it on the net the simplest and
most effective disinfectants are 70% alcohol or one of the aldehydes for most
organisms remembering that you are only disinfecting a hard surface with no
visible volume of liquid containing organisms. We
Hi
A large number of studies have been performed which show that 6F11 will stain a
number of tumours that 1D5 does not and I know a number of labs who have moved
away from 1D5 because of this. Google 1D5 and 6F11 and you will find the
articles.
regards
Tony
Tony Reilly B.Sc.
Hi Brandi
Do you do hot water flushes? If not the film will be a build up of the buffer
salts from your formalin. To flush replace your formalin containers with hot
water and write a program to run each container for 10-15 minutes. This will
not only clean the retorts but the fluid lines as
Hi Jennifer
I realise there are products like Histogel about of which I have no knowledge
however I have been using agar for over 30 years because I can get it easily
and gratis from our microbiology department.
My experience is to spin down the cells, remove the supernatent, then add
Hi Gudren
I have not done this with TB but I have with other bacteria to produce controls
for gram stains. You need to have the tissue in a nutrient broth appropriate
for the organism. You need to consult with a laboratory that specialises in
Mycobacteria to find the appropriate medium to
Hi Margaret
You perform the Alcian Blue first but as with Movatt's pentachrome you need to
treat the sections after AB with alcoholic ammonia for an hour to convert the
AB to Monastral Blue as the AB is soluable in picric acid and the Monastral
blue resistant. Let me know if you need a method
Hi Phebe
The first place to look when working up Antibodies is the Specification sheet
from the manufacturer. If you look at the BD sheet for their CD31
Immunohistochemistry is recommended for Zinc fixed paraffin sections and
acetone fixed frozeb sections but not recommended for formalin
Hi Phebe
The first place to look when working up Antibodies is the Specification sheet
from the manufacturer. If you look at the BD sheet for their CD31
Immunohistochemistry is recommended for Zinc fixed paraffin sections and
acetone fixed frozeb sections but not recommended for formalin
I worked with a pathologist many years ago who would use one piece of
polarising glass on the light source and wear his sunglasses. It worked fine.
regards
Tony
Tony Reilly
Chief Scientist
Anatomical Pathology
Pathology Queensland
Level 1, Building 15
Princess Alexandra Hospital
If your solutions are clean the cause may be that the level of the water wash
station on your stainer is higher than the level of the subsequent alcohol
container which means that some water will not be removed from the top of the
slide. This is common with running water washes on stainers as
Hi Luke
A simple cheap solution would be to buy telephones for the OR and the lab that
have speaker phone capabilities. No expensive purchase cost or installation
required.
regards
Tony
Tony Reilly
Chief Scientist
Anatomical Pathology
Pathology Queensland
Level 1, Building 15
I have used DAKO Target Retrieval in the past and it is definitely possible to
re-use the solution. The important thing to do is to check the pH each day
before use as this is the best indicator that the solution needs to be changed.
It has bee an while since I used it but from my shaky
Of Anthony
Reilly
Sent: Wednesday, 15 April 2009 10:31 AM
To: histonet@lists.utsouthwestern.edu; jeff
Subject: Re: [Histonet] (no subject)
I have used DAKO Target Retrieval in the past and it is definitely possible
to re-use the solution. The important thing to do is to check the pH each
day before use
Hi
Looking at the images this appears to be the prozone effect which is caused by
the primary antibody concentration being too high and has been well reported in
both immunohistochemistry, immunology and serology articles. Do a google serch
for prozone phenomenon and you will find an
Hello
I am trying to differentiate Calcium Phosphate from Calcium Carbonate which
both stain with the von Kossa method. Is there a pretreatment for which only
one is soluble that could be used to differentiate the 2 components.
thanks
Tony Reilly
Chief Scientist
Anatomical Pathology
Hello Joe
This is an interesting question following on from all of the discussion
recently about uncertified techs. In Australia you need tertiary
qualifications to work in a technical position in Histology. Histologists are
regarded and paid at the same level as all other staff working in
Hello Eva
Put simply
1nmol is 10-9 moles
Therefore 10nmol is 10-8 moles
1 mole = 1,064g
Therefore 10-8 moles = 0.1064gor 0.01064mg
Therefore your working solution of 10nmol/ml = 0.01064mg/ml
Your stock solution is 1mg/ml
Therefore your dilution factor is 1.0
Tony Reilly
Chief Scientist
Anatomical Pathology
Pathology Queensland
Level 1, Building 15
Princess Alexandra Hospital
Ipswich Rd,
Woolloongabba Q 4102
Australia
Ph: 07 32402412
Fax:07 32402930
tony_rei...@health.qld.gov.au
Anthony Reilly tony_rei...@health.qld.gov.au 8/01/2009 12:39 pm
Hello Eva
Hi Erin
While the request from your pathologists seems unreasonable from my experience
the following steps will give the best results. Use a rapid drying mountant
many of which are on the market. Consult your local suppliers. Dry in an
incubator as you have been doing but when you remove
23 matches
Mail list logo