Just tried with relative TrX,TrY,TrZ and yaw. Also, I understand that units must be pixels.
Now results make more sense. It seems I actually have problems that could be related to sync errors between the camera and the gps and optimizing using CPs will be useful. Nevertheless, using cpfind I get few CPs. Would it be useful using Autopano-SIFT and/or Panomatic? What do I have to do in order to install these methods? Also, what parameters should I optimize? I think that yaw, TrX,TrY, as TrZ should be pretty stable. Any other advice will be welcome! Thanks Agus On Friday, March 29, 2013 9:11:23 PM UTC+1, Agustin Lobo wrote: > > Hi! > We are testing huging for the task of mosaicking aerial (~1000m) thermal > imagery > over a very flat area (coastal marsh), with know gps x,y,z coordinates > and measured attitude angles (p,r,y). For the test, we are using 7 images > with large > (> 50% overlaps). > In principle, we believe that if we have the coordinates and the attitude > and the area is flat, we should be able > of getting a useful result with hugin, as accuracy requirements are very > low. On the negative side, it will be often hard > getting control points as many of the images will be over the water. Are > we too optimistic? > > I've uploaded the pto file to > http://dl.dropbox.com/u/3180464/testyawrel.pto > > where yaw is relative to the AC image and all the rest are absolute. > Unfortunately, we do not get a successful alignment. Some questions: > > 1. Should x,y,z be kept as absolute (x,y are UTM) coordinates or should > they also be relative > to the values of the AC image? > 2. We are using rectilinear projection, is this correct? > 3. We have tried optimizing x,y,z,r (as advised in a previous message). Is > this correct? > 4. If we use cpfind, we get 44 tie points that look ok, but, after > optimization, we still get an error > at aligning. > 5. When we look at the Fast Panorama View, we see nothing. why? > > Maybe we are just attempting to do something that just cannot be done with > hugin, but I rather think we > are doing something very wrong. > > Any help appreciated (I can upload the test images to dropbox upon > request). > > Thanks! > > Agus > > -- -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.