Has anyone ever had the problem of zfs not starting? No messages in the log;
can't issue any queries, etc. because OMVS is not up - it's waiting on ZFS!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Syslog has no zfs releated messages at all!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Thanks all. I found (I think) the culprit. The BPXPRMxx SYSPLEX parm had been
changed to 'YES'. I reset it to 'NO' (we are a monoplex) and ZFS initialized.
My guess (and I emphasize guess) would be that since some of the zfs files are
copied from another LPAR they would have the other
I'm using a REXX from SCLM panels. The program issues a F cicsregn,cemt s
prog(arg1) phasein
It's ISFP but 'online TSO' under the covers.
Thanks.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Gil,
That method yields,
3 *-* arg1 = 'PS0903A'
L PS0903A
5 *-* /* ADDRESS tso */
6 *-* /* Call CICSCMDT ARG1
I'm beginning to think it can't. I think Rob Scott is correct - I should write
a stub using IKJEFTSR. I found the following from Walt Farrell in a different
list:
Therefore, since Rexx itself is not running authorized, your Rexx exec cannot
simply call another program and have that program
Here's what I have so far.
* The program is APF authorized and lives in a link listed library.
* The program uses MODESET to switch in and out of supervisory mode.
* The program has been added to IKJTSOxx AUTHPGM list.
* The program issues MVS command to modify a CICS region (f, region-name cemt
I'm looking for a method to call an authorized assembler sub-routine from a
REXX exec. Is this possible? Does anyone have a sample? I have also posted to
the TSO-REXX list.
Thanks,
Betsy Jeffery
MGIC
--
For IBM-MAIN subscribe
Can the SWA for TSU jobclass be 'ABOVE'? I seem to remember back in the dark
ages it used to be restricted to 'BELOW' but the manuals don't specify. I'm
guessing it can be either due to no specifications in the JOBCLASS(TSU) doc.
Thanks,
Betsy Jeffery
Thank you Scott; good to know.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at
Does anyone know if a WLM Resource Group also caps zIIP processing (in addition
to standard CP's)?
Thanks.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message:
Does anyone know of a list-serve, group, blog, etc for Candle (IBM) product
AF/Operator?
TIA
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN
I'm looking for a rexx sample of submitting a batch job. Does anyone have a
snippet of code they can share?
TIA,
Betsy Jeffery
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
,
increasing the region in address space created for the stored procedure,
setting -Xms and -Xmx (but I didn't figure out how to do that one). Does
anyone have any suggestions/solutions to getting the settings right for DB2
Java stored procedures?
Thanks,
Betsy Jeffery
Thanks for the posts. Unfortunatley, the suggestions have not worked yet.
My profile shows IMACRO NONE and EDSET shows no inital macro. The
problem persists but not in all files.
Betsy
--
For IBM-MAIN subscribe / signoff /
I found the culprit. The 'ISRUEDIT DSLIST' panel had an errant character in
the inital macro screen. Clearing it fixed the problem for PDS/PDSE/sequential
files. Don't you hate it when the answer is right in front of you but you
can't
see it!
Thanks to all.
/ISPF manuals
don't quite say.
Thanks,
Betsy Jeffery
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http
I'm running a trial of this product and the only hurdle left before giving it a
thumbs up is the poor transfer rate for large files. For example, a file of
625
3390-9 cyl. transfers to a Windows SSHTectia Server in 22 seconds when
using 'plain vanilla' ftp (unsecured). We are running (with
I see, the LE manual I read it in was lying.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at
Back in the OS390 2.10 days the malloc() command/function used to allocate
the storage requested in CSA/ECSA. Does anyone know if this is still true
under z/OS 1.7?
TIA
--
For IBM-MAIN subscribe / signoff / archive access
Don't expect same day service. This list is not read every minite of every day
by every participant. If there is anyone roosting out there doing so - they
must have a lot of time on their hands. It is not a 'chat room' as in
interactive. I look at the list once in the moring as I prefer
We have just implemented a solution for such a transfer. We are required to
secure all data transfers internal or external. For z/OS to Unix to Linux we
use
FTP over System SSL on the z/OS side, lftp and proftp on Unix / Linux
respectively. For Windows, our shop did not change to use a
I simplyhave a habit of putting SYSPRINT into just about everthing. If you
want to quibble about such things, be my guest.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with
You are correct. I misspoke about the sshd running. Our developers didn't
want to change their JCL. We're actually running lftp under System SSL for
both telnet and sftp. I even showed them your dspipes tool and they wouldn't
budge. St. Charles, MO - I'm a Lindenwood alum.
OMVS is not unix. ssh as provided by IBM Ported tools is still ssh (open
source) for unix. OMVS 'prohibits' ssh because of this in addition to the fact
that straight ssh/sftp does not have a facility to work with MVS data set
structure. IBM has been asked to 'fix' this multiple times. IMO
To execute sftp on z/OS using USS, you will need to install IBM Ported Tools.
This is a no cost feature available on the IBM website
http://www-03.ibm.com/servers/eserver/zseries/zos/unix/port_tools.html
The ssh daemon has to be running.
I have recently set this up at our shop. sftp itself
gskkyman still exists. See chapter 9 of the z/OS 1.7 System SSL Programming
Guide. (Cryptographic Services book shelf). My Equifax cert was pullled in
just fine into the gsk key database (hfs file). There are certainly benifits
to
using RACF but it is not required for the cert. The servers
I've been able to set up a TN3270 sever as a separate task and successfully
put both secured and non-secured telnet in the same server. In the telnet
parms you can define setup for port 23 (non-secured) and port 992 (TLS/SSL)
secured. You also have to have the SSL task running (GSKSRVR) - I'm
Thank all of you that responded to my post. I apologize if my next comments
seem to be an unbashed e-commercial for vendor software. (They seem to be
because they are!) I prefer to think of it as a Testimonial. The people
at
Dino-Software responded to my post immediately. Their T-Rex
I've got a PDSE that has it's NVR in one catalog and it's catalog entry in a
different one. And, of course, the dataset is SMS managed. Argh. Please
don't ask how it happened, I do not know. I have been trying in vain to clean
this up as ADRDSSU will not dump the dataset which is causing
I have downloaded the latest version of GDGCOPY from the CBT tape and have
had no issues with it under z/OS 1.7
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message:
(I'm guessing z/OS
does this by default).
I seem to recall that a method to rename active datasets appeared around
OS390 2.10 but having change locations, that functionally is either not
turned-on here or not available in z/OS 1.4?
I'm looking for any hints, tips, backdoor tricks.
Thanks,
Betsy
access USS via TSO. Environmental variables? I haven't found one
yet. USS parms? Thanks in advance.
Betsy Jeffery
MGIC
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED
see 'Dynamic LMU Connection' section of the HSC System Programmer's Guide,
Chapter 2: Host Software Component Functions, for information on what to do
once the hardware has been configured for a TCP/IP LMU. Also refer to the
LMUPATH and LMUPDEF control statements in Chapter 3 of the HSC System
I recall reading about changes required to user written SVC routines in
z/OS 1.7 (upgrading from 1.4) but now I can't locate the document (paged
out of short term memory...) Does anyone know where a list of required
modifications to these types of routines can be found?
Thx,
B.L.Jeffery
just an fyi - JES2 in z/OS 1.7 ships SYS1.SHASLNKE which is a PDSE and in
LNKLST as shipped- =:0
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN
I'm looking for anyone's pgms (SAS, ASSEM, REXX, Whatever) to can format
the USS information on the SMF30, 42, 92 records before I reinvent the
wheel. We have MXG but haven't located anyting canned thus far.
Thanks in Advance
37 matches
Mail list logo