IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU wrote on 09/03/2007
02:15:40 AM:
So you almost always want exactly one and only Store Status for SAD
to capture.
In real life, many shops take advantage of HMC wizardry to define SAD
load
profile(s). These profiles must be different from
The original post I think asked for procedures so I will share our SOP.
My considerations
1. SAD to DASD is very good and has been since 4.3.0 the simplification
of procedure is easily justification for the DASD on reserve to capture
the SAD
2. Allocate two sets of SAD data sets large enough for
So you almost always want exactly one and only Store Status for SAD
to capture.
In real life, many shops take advantage of HMC wizardry to define SAD load
profile(s). These profiles must be different from regular OS load profiles
because the IPL device for SAD is never a sysres volume and may
[EMAIL PROTECTED] Subject
.EDU Re: Stand-Alone Dump Process
Hi Guys,
in the Archives is a thread containing responses from Greg Dyck regarding this
topic.
Subject: Stand Alone Dump Sysplex Method B
see: http://bama.ua.edu/cgi-bin/wa?A2=ind0101L=ibm-mainP=R40691
He explains about auto-store status for Stand Alone Dumps.
Regards
Bruce Hewson
[EMAIL PROTECTED] Subject
.EDU Re: Stand-Alone Dump Process
On Fri, 31 Aug 2007 13:22:33 -0400 Jim Mulder [EMAIL PROTECTED] wrote:
:IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU wrote on 08/31/2007
:12:55:59 PM:
: The advice I've heeded for years is NOT to perform STORE STATUS for
: standalone dump because MVS itself sets a flag that requests STORE
Have any of you ever heard that a Store-Status is NOT needed for dump
taking? Does anyone have a stand-alone dump procedure that they would be
willing to share?
TIA,
George Rodriguez
Specialist, Systems Programmer
[EMAIL PROTECTED]
(561) 357-7652
School District of Palm Beach County
3348
Stand-Alone Dump Process
08/31/2007 09:30
AM
IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU wrote on 08/31/2007
12:55:59 PM:
The advice I've heeded for years is NOT to perform STORE STATUS for
standalone dump because MVS itself sets a flag that requests STORE
STATUS
on the next IPL in the same LPAR. So manual action is not only
-snip---
Have any of you ever heard that a Store-Status is NOT needed for dump
taking? Does anyone have a stand-alone dump procedure that they would be
willing to share?
---unsnip
IIRC, HMC setup for LOAD could
11 matches
Mail list logo