Hey Paul -
Do you get any interesting results from the NetView command line (you may
need to enter INPUT 2 to get more room) if you issue:
WINDOW PIPE CC 5 $DS'SYSLOG'|TOS LAST "$HASP890"|SEP|EDIT "CB" COLOR
1.*|CONS ONLY
If you do, hope is not lost.
On Thu, Jan 4, 2024 at 12:31 PM Paul
I had similar situations a lot of times at different customers' locations.
It always turned out that when the developers at the customer's site
telled me
that they returned all the storage requested to the heap, in fact they
didn't.
There was always a small area left which was not returned or
I could understand fragmentation being any issue if we did not return all the
memory, but during each iteration we return all the application allocated
memory, so how can memory become fragmented?
--
For IBM-MAIN subscribe /
Sounds like your HEAP options are inappropriate for this application,
classic fragmentation ... e.g. set to KEEP and increment size is too
small. Check your CEE_RUNOPTS or there could be other LE config/exits
involved. Suggest you set disp=FREE and work out increment size.
HEAP(initial,
We are in a bit of a quandary here with some memory issues surrounding our
application. This is a multitasking LE C application running in 31 bit mode
that utilizes the IBM JSON and EZNOSQL Services. Some of the attributes are:
• z/OS V2.5 Operation System
• POSIX(OFF) - all
Everyone,
I so appreciate everyone's prompt feedback on my challenge. I ended up using
ITschak Mugzach solution by turning off TSO profile prefix
and removing quotation marks from my input file. I am now good to go. Again
really appreciate the prompt response!
Steve Estle
I have a script that is getting a return code -324 from listdsi. The parameter
is alloc dsn(fqdsn) inrtddn(varname) shr. I tried shr both in upper case and in
lower case. I ccan't send any outbound e-mail fromm my work machine due to
security. Any suggestions?
--
Shmuel (Seymour J.) Metz
Basically I have to set up data at rest (encrypted on DASD).
In that I don't have my clearance yet, or a ID with SPECIAL my hands are
kind of tied.
I do know all the RACF work has to be done before anything else.
Also as I understand it, we will have to unload a file, and reload the
On Thu, 4 Jan 2024 13:55:22 -0600, Steve Estle wrote:
>I've hardcoded the enclosing double quote/quote inside my file as follows:
>"'SYS1.PARMLIB'"
That's the problem. When your exec that works correctly does this:
> DSName = "'SYS1.PARMLIB'"
the
On Thu, 4 Jan 2024 14:07:20 -0600, Steve Estle wrote:
>It fails on this instruction in 2nd scenario:
>
>x = LISTDSI(dsn)
>
What is the failure message?
--
gil
--
For IBM-MAIN subscribe / signoff / archive access instructions,
On Thu, 4 Jan 2024 13:55:22 -0600, Steve Estle wrote:
>
>I'm sure I'm doing something boneheaded but can't quite figure out what. I
>have a list of fully qualified datasets in a file that I want to read the
>dataset names once per record and then once I've read the record with dataset
>name
You need to quote the dsname in apostrophes if it's fully qualified. Try
x = LISTDSI("'"dsn"'")
This might be more readable:
apostrophe = "'"
x = listdsi(apostrophe||dsn||apostrophe)
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
עַם יִשְׂרָאֵל חַי
נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר
It fails on this instruction in 2nd scenario:
x = LISTDSI(dsn)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Simply remove the quote and double quotes from your input file and add
address tso prof nopref
The list Sai sees two set of quotes instead of one at a maximum. You can
try Dan=translate(dsn,' ','"') before the list Sai command
*| **Itschak Mugzach | Director | SecuriTeam Software **|**
Which instruction fails?
Do TRACE on the whole routine.
On Thu, 4 Jan 2024 13:55:22 -0600 Steve Estle wrote:
:>All,
:>
:>I'm sure I'm doing something boneheaded but can't quite figure out what. I
have a list of fully qualified datasets in a file that I want to read the
dataset names once
All,
I'm sure I'm doing something boneheaded but can't quite figure out what. I
have a list of fully qualified datasets in a file that I want to read the
dataset names once per record and then once I've read the record with dataset
name then use that name in a LISTDSI command. When I hard
I have NOT done Digital Certificates in 5 years and I have NEVER done a Site
Certificate.
So does anyone have a document that is a short and to the point of how to
setup
A Site Certificate
Steve
--
For IBM-MAIN
On a z/OS 2.5 system using z System Automation V4.3, I am trying to set a daily
event that runs on each LPAR of the SYSPLEX.
The event needs to issue a 'W L' then locate the SYSLOG output for that
specific LPAR, start an XWTR with job selection for class and JOBID...
For example,
'S
I have removed the ethernet word on link statement.
And it works ! Thanks !
What would be the impact if i start a z/os and a z/vm test environnement ?
Ethernet word will not be required ?
Resiliency Services on Z Mainframe
alain.benveni...@kyndryl.com
> Le 4 janv. 2024 à 15:49, Alan Altmark
Just an FYI. but IEAMDBLG can be modified to exten the output record
length from 132 to 255 and thereby remove split SYSLOG lines.
Michael
At 11:16 AM 1/4/2024, Radoslaw Skorupka wrote:
Content-Transfer-Encoding: 7bit
The following scenario:
z/OS 2.5, two-member parallel sysplex.
Sometimes
The following scenario:
z/OS 2.5, two-member parallel sysplex.
Sometimes I observe IXG251I and IXG284I
ISG251I informs the dataset is in use by another sysplex member
IXG284I says the dataset is PENDING DELETE.
It usually happens during log offload (archivization) using IEAMDBLG
tool, however
It was discussed many times.
There's even single-word German description of such disclaimer.
However the disclaimer has almost no legal meaning.
Accidental recipient has no obligation to delete the message or keep it
secret, etc. Nothing which is caused by the disclaimer (it can be caused
by
HIPPA applies to medical professionals and insurance departments, and not
to anyone to whom the information was sent.
National security call FBI to retrieve, sanitize.
On Thu, Jan 4, 2024 at 9:24 AM Steve Thompson wrote:
> I am glad you brought this up.
>
> I get these things on
If they e-mail me your medical information, that is a HIPAA violation even if I
delete it. If they e-mail me classified documents,, that is a security breach
even if I deleted it. IANAL, but I don't think that a disclaimer would protect
you from severe consequences, both civil and criminal.
I first encountered IPCS on a 2 MiB machine (165 with MVT upgraded to 168 with
SVS.); the dumps were a lot smaller, so IPCS was nice rather than essential. In
today's environment, I don't want to think about living without it.
--
Shmuel (Seymour J.) Metz
http://mason.gmu.edu/~smetz3
עַם
I am glad you brought this up.
I get these things on individual/entity emails sent directly to
me. I didn't sign for this. How could they prove I got it?
Per USPS regs and some other fed Agency whose name I've
forgotten, if you receive something in the mail addressed to you,
that you didn't
On Wed, 3 Jan 2024 09:04:54 -0600, Alain Benvéniste
wrote:
>I had a z/OS (10.1.106.201) under a z/VM(10.1.106.200) speaking to each other
>through CTC, and it worked.
>Now I want them to speak to each other through a unique OSA card as lpars. it
>works but sporadically.
>Each one can ping my
I remember (45 years ago, before IPCS) someone from CICS getting a paper
dump from a US secret government department - with some of the sensitive
data cut out of the EBCDIC translation on the right ( so it had holes in
the printout). Clearly the people with scissors did not realise the data
was
Paper?! For, e.g., SYSABEND, SYSUDUMP, on SPOOL you can at least do a search
for, e.g., eyecatchers, key addresses. On paper a large dump is unmanageable.
When you're swamped is precisely when you need good tools. Not having PDS86 is
bad; not having IPCS is intolerable.
--
Shmuel (Seymour J.)
29 matches
Mail list logo
