Metz
Sent: Thursday, May 9, 2019 2:17 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: Assembly JCL for tpx 5.4
Configuration control is easier if everything in a target library gets there
through SMP.
IMHO documentation should precede implementation, with n immediate update if
anything
du/~smetz3
From: IBM Mainframe Discussion List on behalf of
Mark Zelden
Sent: Thursday, May 9, 2019 4:08 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Assembly JCL for tpx 5.4
What I said below about "good installation documentation" applies. Us
What I said below about "good installation documentation" applies. Usermod or
not
in the previous install, that's so important. Too bad more and more I see
people with the "just install and get it working" mentality and they don't
document anything and put things in their own personal librarie
429 | fax: 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Peter
Sent: Thursday, May 9, 2019 2:24 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Assembly JCL for tpx 5.4
**CAUTION EXTERNAL EMAIL**
**DO NOT open attachments or click on links from unkn
May 9, 2019 2:43 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Assembly JCL for tpx 5.4
>
> [External Email]
>
> It's not part of smpe..
>
> Just assembly and Linkedit..
>
> On Thu, 9 May, 2019, 10:35 PM Jousma, David, <
> 01a0403c5dc1-dmarc-requ...@list
If you really want/need them, search for a reverse assembler. I think there is
one on the CBT tape.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Peter
Sent: Thursday, May 9, 2019 2:43 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Assembly JCL for tpx 5.4
SE | MD RSCB2H | Grand
> Rapids, MI 49546
> 616.653.8429 | fax: 616.653.2717
>
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Peter
> Sent: Thursday, May 9, 2019 2:24 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Assembly
-MAIN@LISTSERV.UA.EDU
Subject: Re: Assembly JCL for tpx 5.4
**CAUTION EXTERNAL EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
We have some user exits used for TPX 5.2 and unfortunately we don't know where
the source codes are located.
Is it
We have some user exits used for TPX 5.2 and unfortunately we don't know
where the source codes are located.
Is it ok to just copy over to 5.4 ?
On Fri, 3 May, 2019, 3:09 AM Mark Zelden, wrote:
> On Thu, 2 May 2019 15:44:14 -0500, Michael Cleary <
> michaeljosephcle...@yahoo.com> wrote:
>
> >If
On Thu, 2 May 2019 15:44:14 -0500, Michael Cleary
wrote:
>If the product is installed with SMPE best practice would be to install the
>exit via an SMPE USERMOD.
>
Not a bad idea, but I don't consider that necessary if the product doesn't come
with an LMOD
for that exit in the product loadlib
If the product is installed with SMPE best practice would be to install the
exit via an SMPE USERMOD.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INF
"
> To: IBM-MAIN@LISTSERV.UA.EDU
> Sent: Thursday, May 2, 2019 1:27:29 PM
> Subject: Assembly JCL for tpx 5.4
>
> Hi,
>
> Cross posted
>
> Does anyone have a sample JCL to assemble and Linkedit the TPX source code
> ?
>
> Peter
>
> --
I have some also found in the install library
and the CB0VSRC library
Carmen Vitullo
- Original Message -
From: "Peter"
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Thursday, May 2, 2019 1:27:29 PM
Subject: Assembly JCL for tpx 5.4
Hi,
Cross posted
Does anyone have a sam
: Assembly JCL for tpx 5.4
[[ SEI WARNING *** This email was sent from an external source. Do not open
attachments or click on links from unknown or suspicious senders. *** ]]
Hi,
Cross posted
Does anyone have a sample JCL to assemble and Linkedit the TPX source code ?
Peter
Hi,
Cross posted
Does anyone have a sample JCL to assemble and Linkedit the TPX source code ?
Peter
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INF
15 matches
Mail list logo