One thing to be careful when you read "unsupported". Many times it just means that it isn't configurable via the IUI interface. I run some 3380-3 drives, many 3390-3, some 3390-9 and a few 3390-27 packs. But I only have 3390-3 packs as the max size for VSE. (I just don't have a real reason for having large packs for VSE.)
Our DS6800, under z/VM 5.1 is running our: (5) VSE/ESA 2.3.2 systems (2) VSE/ESA 2.5.1 systems (2) VSE/ESA 2.7.2 systems 23 Linux systems from Suse 7.3, Suse 8.0, Suse 9.0 (31 and 64 bit systems) But they are all minidisks. I do run flashcopy, but I have only done the flashes from VM. Tom Duerbusch THD Consulting On Friday 31 March 2006 15:33, Steve Wilkins wrote: > Unfortunately, there isn't any fine print. The only VSE/ESA Release > documented as supported in the DS8000 Interoperability Matrix is VSE/ESA > 2.7. As a VMer, I believe the described attachment will work as either a > dedicated DASD or minidisk. However, if there is a problem, and it turned > out to be due to VSE, the VSE support folks can clearly state that it is > unsupported. > > The support folks probably thought a minidisk was OK because they thought > VM might hide status, etc; but I can safely say, that due to the way VSE > does I/O, that it would be no different than dedicated. > > Regards, Steve. > > Steve Wilkins > IBM z/VM Development > ----- Forwarded by Steve Wilkins/Endicott/IBM on 03/31/2006 04:26 PM ----- > > Alan > Altmark/Endicott/ > IBM To > Steve Wilkins/Endicott/[EMAIL > PROTECTED] > 03/31/2006 03:25 cc > PM > Subject > Fw: [IBMVM] VSE/ESA, Z890, Ficon > Express2, and a DS8100 question > > > > > > > > > > Hi. Can you answer this? (I'll post an answer back to the listserv if you > want.) > > Regards, > Alan > > Alan Altmark > Sr. Software Engineer > IBM z/VM Development > ----- Forwarded by Alan Altmark/Endicott/IBM on 03/31/2006 03:25 PM ----- > > "Hughes, Jim - > OIT" > <[EMAIL PROTECTED] To > h.gov> IBMVM@LISTSERV.UARK.EDU > Sent by: The IBM cc > z/VM Operating > System Subject > <[EMAIL PROTECTED] [IBMVM] VSE/ESA, Z890, Ficon > ARK.EDU> Express2, and a DS8100 question > > > 03/31/2006 03:21 > PM > > > Please respond to > The IBM z/VM > Operating System > > > > > > > We need to confirm that VSE/ESA V2R6 running under z/VM V5R2 on > 2086-A04(z890 Model 230) to an IBM 2107(DS8100) over FICON Express2 > attached channels will be supported. The 3390 logical volumes > (3390-3) on the 2107(DS8100) will be ATTACHed (DEDICATEd) to the VSE/ESA > V2R6 virtual machines. > > A simplier statement would be "Will VSE/ESA 2.6 running under ZVM 5.2 > with dedicated dasd on a DS8100 work?" The DS8100 is connected to the > Z890 with FICON Express2 channels. > > I've read the DS8100 manual and does mention VSE/ESA 2.6 is not > supported in the hardware configuration above. > > The IBM support people just told us that VSE/ESA 2.6 DEDICATED or > ATTACHED dasd is not supported. They went on to say MINIDISK dasd is > supported. > > Can someone help me with the fine print?? This is not how I intended to > end the week,\.... > > Thanks and have a good weekend. > > _______________________ > Jim Hughes > "Impossible is just an opinion."