I am out of the office until 03/09/2009.
I will be on vacation starting Wednesday, March 4 returning on Monday,
March 9. During that time, I will have limited access to both email and
VM.
Note: This is an automated response to your message Re: Dynamically
removing paging volumes sent on
Richard and Mark,
Thank you for your assistance. We have verified all of your
recommendations and re-defined the volume group per pvcreate, vgcreate,
and lvcreate. Once complete, the volume group is recognized and I is
used, in our case for Oracle user data. Our linux operating system and
I remember a couple HDA failures caused by the raised floor layout. The
cold air was venting up directly beneath the 3380's and was too cold. It
caused the grease in the bearings to thicken.
Brian Nielsen
On Mon, 9 Mar 2009 19:57:47 -0500, Marcy Cortes
marcy.d.cor...@wellsfargo.com
Two additional pieces of information that I forget to mention. After the
SUSE 9 guest is re-IPLed, the volume group can most of the time be
activated by entering a vgchange -ay command. Occassionally this does
not work and we have issue a config command that will rebuild the
links and then the
Dear colleagues:
Your moderator is compelled to point out that in may parts of the globe,
it is now Tuesday. *cough*rampantlyofftopic*cough*
By dint of the ongoing ramblings of this thread, it is officially
confirmed: Many of us are older than dirt. Your humble moderator,
while perhaps
Thanks for the reply. I have several follow-up questions, might be more
straightforward to contact you offline.
The EKM will reside on an Intel server. I am aware of the out of band
requirement. Thanks.
I never ran into that one, but I did experience tape failures due to the
raised floor. The year was 1963, the CPU a 7080, and the tape drives
were, IIRC, 726s. My memory if fuzzy on the last - they were the
predecessors of the 729s. One drive kept having I/O errors. The CE
checked it several times
On 3/10/2009 at 10:34 AM, Robert J McCarthy bob.mccar...@custserv.com
wrote:
Two additional pieces of information that I forget to mention. After the
SUSE 9 guest is re-IPLed, the volume group can most of the time be
activated by entering a vgchange -ay command. Occassionally this does
not
Try tracing it. If either notrace or nosline was specified, you will not
be able to do it. If SLINE was allowed, trace should work.
Regards,
Richard Schuh
-Original Message-
From: The IBM z/VM Operating System
[mailto:ib...@listserv.uark.edu] On Behalf Of Ian S. Worthington
You could also use the SERVICE command with the STATUS operand to get
status on a list of PTFs or APARs installed. If you wanted to know if al
l
the PTFs that you have on SYSTEM1 are installed on SYSTEM2, you could
create a list of PTFs from the Apply list on SYSTEM1 and then use that as
Is there now a cleaner way to have PERFSVM recognize the time zone change
other than recycling the server? I'm on z/VM 5.2 and z/VM 5.4. I guess this
also applies to userids like VMUTIL also.
Thanks in advance
Hans
I am trying to recoop some space so that I could run mkintrd and zipl, without
adding more space to my SLES 9.0 SP3 system I've been deleting files and
uninstalling RPMs, when I issue the following command I receive the following
response:
df
Take a look in /var/log for old log files, they can typically be removed. Also /tmp is
a good candidate for removal of old files.
clifford jackson wrote:
I am trying to recoop some space so that I could run mkintrd and zipl,
without adding more space to my SLES 9.0 SP3 system I've been
It was mentioned in a keynote - so I guess it is official
now. No dates for it that I know of, except I think Jim Elliot
said not this year in one of his presentations.
Paul/Lionel:
In the Freund/Castano keynote this function was referred to as
Virtual Machine Mobility. In one of my sessions
Jim - thank you.
So not this year - what is the probability of next year Q1 ? or Q2?
Lionel B. Dyck, Consultant/Specialist
?Never attribute to malice what can be caused by miscommunication.?
NOTICE TO RECIPIENT: If you are not the intended recipient of this e-mail,
you are prohibited from
Testing out z/VM 5.4 and would like to implement secure telnet, ftp etc using
the SSL server. I have gone through the TCPIP configuration and certificate
database creation of the SSL server but I get the following from SSLSERV when
the server is autologged by TCPIP:
DTCRUN1022I Console log will
I don't know.. do you have the SSL enabling PTF's on?
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu]on
Behalf Of Tyler Koyl
Sent: Tuesday, March 10, 2009 4:31 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: SSL Server on z/VM 5.4 RSU 802
Testing out z/VM
As you are removing/deleting things, and the space still shows 0%
available, that shows me that you have some process that is using up
space quickly. It might be some process that is logging the fact that
it is out of space G.
Depending on what application(s) you have running, you may want to
I don't think there is currently a better way - no. I can't remember the
details, but the apps have to be able to take advantage of the TIMEZONE
value, and I don't believe PERFKIT is one of them.. (someone correct
please!).
Funny you mention VMUTIL - when asked how to do the SET TIMEZONE
On Tuesday, 03/10/2009 at 05:32 EDT, Lionel B. Dyck
lionel.b.d...@kp.org wrote:
So not this year - what is the probability of next year Q1 ? or Q2?
Lionel, not this year is the best you're going to get for now. Sorry.
When we're ready to give specifics, rest assured we will.
Alan Altmark
There's Early Ship Programs. You could contact your IBM'ers and see if
there's any starting in the near or distant future that you could
participate in. That's usually a good way to get good stuff early :)
Marcy
This message may contain confidential and/or privileged information. If
you
On 3/10/2009 at 5:51 PM, Tom Duerbusch duerbus...@stlouiscity.com wrote:
As you are removing/deleting things, and the space still shows 0%
available, that shows me that you have some process that is using up
space quickly.
Probably not. That 0% only applies to non-root users, because of
Agreed -- move at least /var and /tmp to separate devices (and it's nice to
have /var in an lvm so you can grow it for very busy servers).
Scott
On Tue, Mar 10, 2009 at 5:19 PM, Mark Post mp...@novell.com wrote:
On 3/10/2009 at 5:51 PM, Tom Duerbusch duerbus...@stlouiscity.com
wrote:
As
Thanks. Thats was it. I found the enablement PTFs and installed them. This is a
real PITA. From having to figure out that ssl needed to be enabled to finally
getting SSLSERV to initialize properly only after storing the database password
in a friggin stash file with the right permissions; made for
Tyler:
Did you check the PSP bucket? Rule no. 1, always check the PSP bucket.
http://www.vm.ibm.com/related/tcpip/psp-540.html
Jim
Looks like that's a no to sline.
Do any options exist for decompiling it? iirc it is/used to be tokenised
rather than translated to machine code so it shouldn't be that difficult?
i
-- Original Message --
Received: Tue, 10 Mar 2009 01:32:22 PM COT
From: Schuh, Richard rsc...@visa.com
After a bit of experimentation, it turns out that diag 2a8 is actually
effectively half duplex (while you can effectively send and receive in the same
operation, the call doesn't return until all the operations complete), so we
detected that properly. We also set the interface driver to report
I've commented on SERVICE before. I think that there should be some
doc that covers SERVICE. For the most part, it's just a big black
box. At the very least, give us a SERVICE HELP???. I understand the
need for SERVICE, but for the slightly more technically inclined or VM
experienced
Done that. Been there. Unless you like arrows in your back for being
a pioneer and/or if you have a not very critical system you could put
Early Ship code on, I'd stay away.
Jim
Marcy Cortes wrote:
There's Early Ship Programs. You could contact your IBM'ers and see if
there's any
Like DASD, this is another area where the present is way different from
the past :)
We've had a lot of success with the ESPs.
I'm know a few others here have too.
Marcy
This message may contain confidential and/or privileged information. If
you are not the addressee or authorized to receive
31 matches
Mail list logo
