Mikhael,
Listen to Alan and call in the Support Centre.
While you wait... What did the hardware guys do? Did they replace a
drive in a Symmetrix's RAID group? If they did, I would also check any
other DASD that may be affected (e.g. other DASD on the same stripe
in the same RAID-5/S group as
: SPOOL volume disk error
Mikhael,
Listen to Alan and call in the Support Centre.
While you wait... What did the hardware guys do? Did they replace a
drive in a Symmetrix's RAID group? If they did, I would also check any
other DASD that may be affected (e.g. other DASD on the same stripe
Yes, I agree. Mikhael, please call this in to the service center and sen
d
in the dump for the PFE002 if you have it. That abend could certainly ha
ve
been triggered by the spool volume problem, but it's almost certainly a
separate problem in our memory management subsystem, and one which we won
Hi Everybody,
Just last week one of our production z/VM SPOOL volume got a device HW
error and we started to get the ff: error messages:
HCPPAH415E Six continuous paging errors have occurred on DASD 440E
volume 514SPL.
HCPVSS429E Console 0009 spool error; file held
Our system restarts by
, 2007 8:44 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
Hi Everybody,
Just last week one of our production z/VM SPOOL volume got a device HW error and
we started to get the ff: error messages:
HCPPAH415E Six continuous paging errors have occurred on DASD 440E volume
Nope..the volume in error is exclusively for spool use only...Thanks!
_
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 11:03 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
Do you have both page and spool space
What was the abend code when the system restarted?
What kind of disk is it?
Check the allocation map of the volume against the real size of the
pack. Was the pack initially formated or DDR-copied from somewhere
else?
Of Mikhael Ramirez Joaquin
Sent: Monday, May 07, 2007 11:07 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
Nope..the volume in error is exclusively for spool use only.Thanks!
_
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 11
@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
Hi Everybody,
Just last week one of our production z/VM SPOOL volume got a device HW
error and we started to get the ff: error messages:
HCPPAH415E Six continuous paging errors have occurred on DASD 440E
volume 514SPL.
HCPVSS429E Console 0009 spool
-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 11:24 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
What was the abend code when the system restarted?
What kind of disk is it?
Check the allocation map of the volume against the real size
Ok..thanks! will do!
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 11:32 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
On Tuesday, 05/08/2007 at 10:43 ZE8, Mikhael Ramirez Joaquin
[EMAIL PROTECTED
system.
Thanks!
_
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 11:49 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: SPOOL volume disk error
Mikhael,
Cool name, but obviously, I am somewhat biased.
If memory serves, this same
On Tuesday, 05/08/2007 at 12:09 ZE8, Mikhael Ramirez Joaquin
[EMAIL PROTECTED] wrote:
The message left in the operator console was:
SYSTEM RESTARTED PFE002 AND SYSTEM CONSOLE NOT VM OPERATOR CONSOLE
It's a 3390-Model-3 Symetrix.
The pack was already working before..just when the device
13 matches
Mail list logo