Hi,
--- On Wed, May 13, 2009 at 12:14 PM, Leena wrote:
| I tried to carry out the steps and still not successful in getting modem
| recognized...
\--
USB devices can operate in different configurations (mass storage,
modem, etc.), and by default USB modems are configured to use mass
storage, so
thanks Arun for refering to the linkit is related to same problem I
am facing.
I know you have not used EC121but has anynody else on this list
tried out steps from following link:
http://www.ae.iitm.ac.in/pipermail/ilugc/2009-January/045551.html
I tried to carry out the steps and stil
HI,
I executes the command you have said in your mail. Output is:
Can't figure what it is...but looks like when i disconnected on address2
it showing that, and later as you have suggested after connecting USB
showing last four lines.
thanks for your help
r...@leena-laptop:/# tail -f /var/log/m
Hi,
--- On Wed, May 13, 2009 at 10:42 AM, Leena wrote:
| Output is as follows:
| r...@leena-laptop:/home/leena# /bin/dmesg | tail -10
| [ 111.860905] wlan0: Initial auth_alg=0
|
\--
[Snip]
I don't see any USB related output here. Do the following instead:
1. Remove the USB modem from the lapt
Hi Shakthi,
Output is as follows:
r...@leena-laptop:/home/leena# /bin/dmesg | tail -10
[ 111.860905] wlan0: Initial auth_alg=0
[ 111.860914] wlan0: authenticate with AP 00:1e:40:5b:8a:48
[ 111.863543] wlan0: RX authentication from 00:1e:40:5b:8a:48 (alg=0
transaction=2 status=0)
[ 111.863549
On Wednesday 13 May 2009, Leena wrote:
> HI all,
>
> I am struggling to get reliance datacard (EC121) to work with Ubuntu.
> I have worked with older reliance cards before (EC325, silver color
> one) and have had no issues with it.
> for those I used to coonect through Gnome-ppp and make required
>
Hi,
--- On Wed, May 13, 2009 at 10:04 AM, Leena wrote:
| le...@leena-laptop:~$ wvdial conf
| --> WvDial: Internet dialer version 1.60
| --> Warning: section [Dialer conf] does not exist in wvdial.conf.
| --> Cannot open /dev/modem: No such file or directory
|
| and lsusb is able to detect product
HI all,
I am struggling to get reliance datacard (EC121) to work with Ubuntu. I
have worked with older reliance cards before (EC325, silver color one)
and have had no issues with it.
for those I used to coonect through Gnome-ppp and make required changes
in wvdial.conf and that was sufficient