From: Ville Syrjälä <ville.syrj...@linux.intel.com>
To get sensible vblank timestamping behaviour we need to feed
the vmax based timings to the vblank code, otherwise it'll chop
off the scanline counter when it exceeds the minumum vtotal.
Additionally with VRR we have three cases to consider when we
generate the vblank timestamp:
1) we are in vertical active
-> nothing special needs to be done, just return the current
scanout position and the core will calculate the timestamp
corresponding to the past time when the current vertical
active started
2) we are in vertical blank and no push has been sent
-> the hardware will keep extending the vblank presumably
to its maximum length, so we make the timestmap match the
expected time when the max length vblank will end. Since
the timings used for this are now based on vmax nothing
special actually needs to be done
3) we are in vblank and a push has been sent so the vblank is
about to terminate
-> presumably we want the timestmap to accurately reflect
when the vblank will terminate, so we use the sampled
frame timestamp vs. current timestamp to guesstimate
how far along the vblank exit we are, and then we
adjust the reported scanout position accordingly so
that the core will see that the vblank is close to
ending.
v2:
* Fix the else if (use_scanline_Counter) (Manasi)
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.nav...@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 17 ++++++++++++-----
.../gpu/drm/i915/display/intel_display_types.h | 4 ++++
drivers/gpu/drm/i915/display/intel_vrr.c | 4 ++++
drivers/gpu/drm/i915/i915_irq.c | 15 ++++++++++++++-
4 files changed, 34 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index b3a0e5e81d2e..5c4d394d8231 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -11791,10 +11791,17 @@ intel_crtc_update_active_timings(const struct
intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- const struct drm_display_mode *adjusted_mode =
- &crtc_state->hw.adjusted_mode;
+ struct drm_display_mode adjusted_mode =
+ crtc_state->hw.adjusted_mode;
+
+ if (crtc_state->vrr.enable) {
+ adjusted_mode.crtc_vtotal = crtc_state->vrr.vmax;
+ adjusted_mode.crtc_vblank_end = crtc_state->vrr.vmax;
+ adjusted_mode.crtc_vblank_start =
intel_vrr_vmin_vblank_start(crtc_state);
+ crtc->vmax_vblank_start =
intel_vrr_vmax_vblank_start(crtc_state);
+ }
- drm_calc_timestamping_constants(&crtc->base, adjusted_mode);
+ drm_calc_timestamping_constants(&crtc->base, &adjusted_mode);
crtc->mode_flags = crtc_state->mode_flags;
@@ -11828,8 +11835,8 @@ intel_crtc_update_active_timings(const struct
intel_crtc_state *crtc_state)
if (IS_GEN(dev_priv, 2)) {
int vtotal;
- vtotal = adjusted_mode->crtc_vtotal;
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+ vtotal = adjusted_mode.crtc_vtotal;
+ if (adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
vtotal /= 2;
crtc->scanline_offset = vtotal - 1;
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
b/drivers/gpu/drm/i915/display/intel_display_types.h
index b5bac4c81de1..39397748b4b0 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -693,6 +693,8 @@ struct intel_crtc_scaler_state {
#define I915_MODE_FLAG_DSI_USE_TE1 (1<<4)
/* Flag to indicate mipi dsi periodic command mode where we do not get TE */
#define I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE (1<<5)
+/* Do tricks to make vblank timestamps sane with VRR? */
+#define I915_MODE_FLAG_VRR (1<<6)
struct intel_wm_level {
bool enable;
@@ -1200,6 +1202,8 @@ struct intel_crtc {
/* I915_MODE_FLAG_* */
u8 mode_flags;
+ u16 vmax_vblank_start;
+
struct intel_display_power_domain_set enabled_power_domains;
struct intel_overlay *overlay;
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c
b/drivers/gpu/drm/i915/display/intel_vrr.c
index 49ff5add90e0..a9c2b2fd9252 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -134,6 +134,8 @@ intel_vrr_compute_config(struct intel_crtc_state
*crtc_state,
*/
crtc_state->vrr.pipeline_full =
min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay -
4 - 1);
+
+ crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
}
void intel_vrr_enable(struct intel_encoder *encoder,
@@ -202,4 +204,6 @@ void intel_vrr_get_config(struct intel_crtc *crtc,
crtc_state->vrr.flipline = intel_de_read(dev_priv,
TRANS_VRR_FLIPLINE(cpu_transcoder)) + 1;
crtc_state->vrr.vmax = intel_de_read(dev_priv,
TRANS_VRR_VMAX(cpu_transcoder)) + 1;
crtc_state->vrr.vmin = intel_de_read(dev_priv,
TRANS_VRR_VMIN(cpu_transcoder)) + 1;
+
+ crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b1998b272fd1..5075f4ea2b23 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -893,7 +893,20 @@ static bool i915_get_crtc_scanoutpos(struct drm_crtc
*_crtc,
if (stime)
*stime = ktime_get();
- if (use_scanline_counter) {
+ if (crtc->mode_flags & I915_MODE_FLAG_VRR) {
+ int scanlines =
intel_crtc_scanlines_since_frame_timestamp(crtc);
+
+ position = __intel_get_crtc_scanline(crtc);
+
+ /*
+ * Already exiting vblank? If so, shift our position
+ * so it looks like we're already apporaching the full
+ * vblank end. This should make the generated timestamp
+ * more or less match when the active portion will start.
+ */
+ if (position >= vbl_start && scanlines < position)
+ position = min(crtc->vmax_vblank_start + scanlines,
vtotal - 1);
+ } else if (use_scanline_counter) {
/* No obvious pixelcount register. Only query vertical
* scanout position from Display scan line register.
*/
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
