Sorry Chris, I spoke too soon.
The working config was single screen/monitor config, as attached here.
Commenting of SNA line made it work.
The dual screen configuration is still failing as before. And if I comment out
the SNA lines I get this in the X log.
[3056612.622] Requested Entity alrea
>
> The ZaphodHead connector name should match the name given by xrandr,
> which would appear to be HDMI1. Getting closer...
> -Chris
>
> --
> Chris Wilson, Intel Open Source Technology Centre
Thanks Chris, Yes, it got me closer. The X is not failing now as seen in the
attached log with the att
On Wed, Feb 06, 2013 at 11:43:51PM +, Kamble, Nitin A wrote:
> Chris,
>
> X is failing even with this reduced 1 screen config.
>
> Section "Device"
> Identifier "Intel0"
> Driver "intel"
> BusID "PCI:00:02:0"
> Option "ZaphodHeads" "HDMI-A-1"
The ZaphodHead c
Chris,
X is failing even with this reduced 1 screen config.
Section "Device"
Identifier "Intel0"
Driver "intel"
BusID "PCI:00:02:0"
Option "ZaphodHeads" "HDMI-A-1"
Option "AccelMethod" "SNA"
Screen 0
EndSection
Section "Monitor"
Identifier
On Wed, Feb 06, 2013 at 11:00:49PM +, Kamble, Nitin A wrote:
> Thanks Chris for the reply. Attached are all the relevant log files.
Both screen stanzas are pointing to the same device.
It should be:
Screen0 -> Device0,
Screen1 -> Device1
-Chris
--
Chris Wilson, Intel Open Source Technolo
> -Original Message-
> From: ch...@chris-wilson.co.uk [mailto:ch...@chris-wilson.co.uk]
> Sent: Wednesday, February 06, 2013 2:12 PM
> To: Kamble, Nitin A
> Cc: intel-gfx@lists.freedesktop.org
> Subject: Re: ZaphodHeads with intel X driver
>
> On Wed, Feb 06, 2013 at 06:43:53PM +, Ka
On Wed, Feb 06, 2013 at 06:43:53PM +, Kamble, Nitin A wrote:
>
> On a Intel core i3 (ivybridge) system (NUC) with 2 HDMI ports, I am trying to
> get two independent screens by following this method.
> http://en.gentoo-wiki.com/wiki/X.Org/
> Dual_Monitors#Single_graphics_card.2C_Multiple_X_scre
On a Intel core i3 (ivybridge) system (NUC) with 2 HDMI ports, I am trying to
get two independent screens by following this method.
http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors#Single_graphics_card.2C_Multiple_X_screens_with_ZaphodHeads
And X is failing to start complaining about no usable