At 16:40 3/12/2009, you wrote:
Hello Tom
I did not appreciate copper pipe of different lengths gives lower resistance.
10 footers are a none starter here. Would 3 x 3 foot copper ground rods be
around 10 Ohms or are the mathematics not as simple as that? I use a EWE
antenna where grounding is
Nick and Barry,
Here in my backyard where the soil is wet and swampy a lot of the year,
I use 5 foot copper pipes, 1/2 inch generally along wth hose clamps to
tighten the wire down. My yard is loaded wikth copper pipe through the
years. They are very easy to pound in. Half of the 5 foot pipe or
Neil Kazaross wrote:
In normal non saturated areas of my properties, I can usually pound in a
5' piece of 1 copper pipe, but the last couple of feet are a superb
workout. I don't think that I'd be able to pound in a 10 footer in most
places.
Have you tried soldering a male garden hose
.
Barry
--- On Wed, 11/3/09, Tom Jasinski amd...@core.com wrote:
From: Tom Jasinski amd...@core.com
Subject: [IRCA] Ground Resistance
To: irca@hard-core-dx.com, a...@nrcdxas.org
Date: Wednesday, 11 March, 2009, 3:34 PM
There has been some recent discussion about outdoor antennas and grounds.
No one
:26 -0400
From: Rick Kunath k...@charter.net
To: Mailing list for the International Radio Club of America
irca@hard-core-dx.com
Subject: Re: [IRCA] Ground Resistance
Message-ID: 49b8f6c6.5020...@charter.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Have you tried
There has been some recent discussion about outdoor antennas and grounds.
No one has mentioned what a good ground RESISTANCE is. Here is my two cents
worth.
Since last fall I have been measuring ground resistance from four TEST
ground rods in my back yard. The rod specs are as follows; one 3/4
, 2009 10:34 AM
Subject: [IRCA] Ground Resistance
There has been some recent discussion about outdoor antennas and grounds.
No one has mentioned what a good ground RESISTANCE is. Here is my two
cents
worth.
Since last fall I have been measuring ground resistance from four TEST
ground rods