175' is a bit close for a side by side (Broadside) array, but a bit far for
an end to end (Endfire array) for BCB, but certainly this should still
provide pattern improvements. 73 KAZ
On Mon, Jul 9, 2018 at 1:49 PM, Brandon Jordan wrote:
> I walked the spacing off today, it looks like roughly 1
I walked the spacing off today, it looks like roughly 175’ from SAL to SAL
center.
One of these will be a SAL-35, the second a SAL-30. I have more spacing options
for a SAL-20 as the second SAL, up to a 400’.
> On Jul 7, 2018, at 9:30 PM, Neil Kazaross wrote:
>
> By all means phase two SAL's
I have the DX NCC-1 and have used for several years. It is well built. It
is large, much larger than say a Quantum phasor. I have had good results
with it. I have phased beverages, DHDL, D-KAZ, K9AY array with 4 square,
and most recently using it with dx engineering arrv verticals. The NCC-2
allow
By all means phase two SAL's or similar if you have room. How far apart can
you place them? 73 KAZ
On Sat, Jul 7, 2018 at 6:22 PM, Brandon Jordan wrote:
> Hi Colin. I missed this post somehow but, since seeing it, thought I
> should respond. I own both the NCC-1 and NCC-2. I actually thought I
Hi Colin. I missed this post somehow but, since seeing it, thought I should
respond. I own both the NCC-1 and NCC-2. I actually thought I sold the NCC-1
last year on eBay but obviously did not as I just found it boxed up in my radio
room closet.
I have way more experience with the NCC-1, mainly
DXE NCC-2 or with its predecessor, NCC-1. PHASERS-
Who among you have used this for DXing?
Appreciate all comments.
Colin Newell - Victoria - B.C. CANADA -
DXER.ca ———
___
IRCA mailing list
IRCA@hard-core-dx.com
http://montreal.kotalampi.com/mailman